Three-line structured light vision system for non-cooperative satellites in proximity operations

Adapter ring is a commonly used component in non-cooperative satellites, which has high strength and is suitable to be recognized and grasped by the space manipulator. During proximity operations, this circle feature may be occluded by the robot arm or limited field of view. Moreover, the captured images may be underexposed when there is not enough illumination. To address these problems, this paper presents a structured light vision system with three line lasers and a monocular camera. The lasers project lines onto the surface of the satellite, and six break points are formed along both sides of the adapter ring. A closed-form solution for real-time pose estimation is given using these break points. Then, a virtual structured light platform is constructed to simulate synthetic images of the target satellite. Compared with the predefined camera parameters and relative positions, the proposed method is demonstrated to be more effective, especially at a close distance. Besides, a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions. Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.     

Postcapture stabilization of space robots considering actuator failures with bounded torques

Space robotics is regarded as one of the most impressing approaches for space debris removal missions. Due to the residual momentum of debris, it is essential to stabilize the base rapidly after capture. This paper presents a novel control strategy for stabilization of a space robot in postcapture considering actuator failures and bounded torques. In the control strategy, the motion of the manipulator is not regarded as a disturbance to the base; in contrast, it is utilized to compensate for the limitation of the control torques by means of an inverse dynamical model of the system. Different scenarios where actuators are external mechanisms or momentum exchange devices have been carried out, and for actuator failures, both single- and two-actuator failures have been considered. Regarding to the performance of actuators, control torques are bounded. In cases that either single or two actuators have failed, the base can be stabilized kinematically when actuators are external mechanisms, but can only be stabilized dynamically when only momentum exchange devices are used. Finally, a space robot with a seven-degree-of-freedom manipulator in postcapture is studied to verify the validity and feasibility of the proposed control scheme. Simulation results show that the whole system can be stabilized rapidly.     

Spacecraft Design-for-Demise implementation strategy & decision-making methodology for low earth orbit missions

Space missions designed to completely ablate upon an uncontrolled Earth atmosphere reentry are likely to be simpler and cheaper than those designed to execute controlled reentry. This is because mission risk (unavailability) stemming from controlled reentry subsystem failure(s) is essentially eliminated. NASA has not customarily implemented Design-for-Demise meticulously. NASA has rather approached Design-for-Demise in an ad hoc manner that fails to entrench Design-for-Demise as a mission design driver. Thus, enormous demisability challenges at later formulation stages of missions aspired to be demisable are evident due to these perpetuated oversights in entrenching Design-for-Demise practices. The investigators hence propose a strategy for a consistent integration of Design-for-Demise practices in all phases of a space mission lifecycle. Secondly, an all-inclusive risk-informed, decision-making methodology referred to as Analytic Deliberative Process is proposed. This criterion facilitates in making a choice between an uncontrolled reentry demisable or controlled reentry. The authors finally conceive and synthesize Objectives Hierarchy, Attributes, and Quantitative Performance Measures of the Analytical Deliberative Process for a Design-for-Demise risk-informed decision-making process.     

The performance of KSC Fixation Tubes with RNALater for orbital experiments: A case study in ISS operations for molecular biology

Molecular biology experiments on the International Space Station (ISS) continue to face challenges of sample harvesting and sample return to earth for post flight analysis; however, the use of Kennedy Space Center Fixation Tubes filled with RNALater has proven to be a robust solution to many of these challenges. While it is clear that one direction of future spaceflight experimentation may be towards enhanced on-orbit analytical capabilities, the rapid progress of earth-bound analytical capacity dictates that facile return of molecular biology samples from the ISS will continue to be a mainstay of space life sciences research and flight operations. In this paper we present a case study of the successful performance of KFTs and RNALater over a broad set of operational conditions of ascent configuration, on-orbit experiment use, on-orbit storage and sample return configurations that are unique to ISS current operations and constraints. We also provide observations on performance limits and discuss deployment opportunities and scenarios that are consistent with continued successful ISS molecular biology experimentation.     

Charge exchange interactions on near-Earth proton radiation for orbit perturbation of high area-to-mass ratio objects

This novel concept expels neutral gas in the presence of geomagnetically-trapped protons in near-Earth orbit. The expelled neutral gas acts to induce charge exchange collisions with the geomagnetically-trapped protons and induce drag on objects which pass through it. The charge exchange collisions between the neutral gas and the geomagnetically-trapped protons create neutrals with similar kinetic energy that are not confined by the geomagnetic field. The charge exchange neutrals are able to collide with orbital objects and perturb their orbits. The delta-v applied by the charge exchange neutral flux is greatest on high area-to-mass objects. Numerical simulation shows charge exchange neutral impacts produce a delta-v on objects on the order of 3.8 x 10⁻¹¹ m/s at a distance of 1 km from the center of the expelled gas in a 1,000 km orbit. The impulse imparted by charge exchange neutral impacts is at least six orders of magnitude smaller than that provided by the induced drag caused by gas expulsion. The localized drag increase can force a majority of small objects into the orbit of the expelled gas cloud, even if that orbit is retrograde to the initial orbit of the objects. This new technique can be applied to the remediation of space debris.     

First astrometric observations of space debris with the MéO telescope

The MéO (for Métrologie Optique) telescope is the Satellite and Lunar Laser Ranging (SLR) dedicated telescope of Observatoire de la Côte d’Azur (France) located at plateau de Calern. The telescope uses an altazimuth mount. The motorization of the mount has a capability of 6 deg/s allowing the follow up of Low Earth Orbits (LEO) satellites, as well as Medium Earth Orbits (MEO) and geostationary (GEO) satellites, and the Moon. The telescope has a primary mirror of 1.54 m. It uses a Nasmyth focus equipped with an EMCCD camera. The telescope field of view, defined by the equivalent focal length and the size of the camera, is currently 3.4 arcmin × 3.4 arcmin.     

Debris swarms seen by SMEI

The large 3° × 60° fields-of-view of the Solar Mass Ejection Imager (SMEI) instruments are oriented on the stabilized Coriolis satellite to image most of the sky each Sun-synchronous orbit. Besides observing coronal mass ejections, the SMEI mission objective, SMEI also has detected a plethora of Earth-orbiting satellites (resident space objects or RSOs) brighter than ∼8th magnitude at a rate of about 1 per minute. Occasionally, SMEI sees an RSO swarm: a sudden onset of a large number of RSOs, many more than the nominal rate, upto dozens detected in a 4-s frame. These swarms usually last for a few minutes. A sample of six such RSO ensembles is analyzed in this paper in which the distance and the direction of the velocity vector for individual objects are estimated. We present the observational evidence indicating that the swarms must be near-field objects traveling in orbits near that of Coriolis, and that the relatively speeds between the objects and Coriolis are low. Further, analyses indicate that the RSOs are quite close (<20 m) and are generally moving radially away from the satellite. The predicted encounter geometries for Coriolis passing through or near a small debris cloud is, generally, quite inconsistent with the observations. The most likely explanation consistent with the observations is that SMEI is seeing debris being ejected from the Coriolis spacecraft itself. An analysis of distance and brightness for a subset of the RSOs indicates that the median diameter of the debris particles is ∼80 μm.     

Nostoc sphaeroides Kützing,an excellent candidate producer for CELSS

Some phytoplankton can be regarded as possible candidates in the establishment of Controlled Ecological Life Support System (CELSS) for some intrinsic characteristics, the first characteristic is that they should grow rapidly, secondly, they should be able to endure some stress factors and develop some corresponding adaptive strategies; also it is very important that they could provide food rich in nutritious protein and vitamins for the crew; the last but not the least is they can also fulfill the other main functions of CELSS, including supplying oxygen, removing carbon dioxide and recycling the metabolic waste. According to these characteristics, Nostoc sphaeroides, a potential healthy food in China, was selected as the potential producer in CELSS. It was found that the oxygen average evolution rate of this algae is about 150 μmol O₂ mg⁻¹ h⁻¹, and the size of them are ranged from 2 to 20 mm. Also it can be cultured with high population density, which indicated that the potential productivity of Nostoc sphaeroides is higher than other algae in limited volume. We measured the nutrient contents of the cyanobacterium and concluded it was a good food for the crew. Based on above advantages, Nostoc sphaeroides was assumed to a suitable phytoplankton for the establishment of Controlled Ecological Life Support System. We plan to develop suitable bioreactor with the cyanobacterium for supplying oxygen and food in future space missions.     

An overview of RADOM results for earth and moon radiation environment on Chandrayaan-1 satellite

The RADiatiOn Monitor (RADOM) is a miniature dosimeter-spectrometer that flew onboard the Chandrayaan-1 lunar mission in order to monitor the local radiation environment. Primary objective of the RADOM experiment was to measure the total absorbed dose, flux of surrounding energetic particles and spectrum of the deposited energy from high energy particles both en-route and in lunar orbit. RADOM was the first experiment to be switched on after the launch of Chandrayaan-1 and was operational until the end of the mission. This paper summarizes the observations carried out by RADOM during the entire life time (22 October 2008–31 August 2009) of the Chandrayaan-1 mission and compares the measurement by RADOM with the radiation belt models such as AP-8, AE-8 and CRRESS.