The Space Sciences and Application Projects in Space Laboratory

Space sciences and application projects arranged in Tiangong-2 space laboratory and Tianzhou-1 cargo ship have been described in detail, covering research areas of the fundamental physics, space astronomy, microgravity fluid physics and materials science, space life science, and earth science. These experiments and researches will hopefully produce great scientific results and social benefits in several fields, including:universe evolution, quantum communication, material development, global climate change and earth environment, etc.     

天地往返运输系统空气喷气组合式发动机方案探讨

本文初步探讨了用作天地往返运输系统推进装置的组合发动机,估算了其性能、尺寸、重量以及使用这些发动机时的运载能力。     

航天光学遥感器仿真系统原理方案初步设计

介绍了航天光学遥感器仿真系统技术研究目的和意义。根据初步的研究结果，探讨了航天光学遥感器系统仿真技术方案、主要研究内容、技术途径等。重点研究了目标与背景、空间环境条件（温度场、真空、重力场和辐照）、卫星平台等对遥感器成像质量的影响和仿真内容，研究了用地面试验进行验证的方法，提出了建立系统仿真的结构体系等。     

Antenna for precise orbit determination

The ESA SWARM mission will consist of three satellites that will measure the Earth magnetic field. The system calls for metre accuracy knowledge of the measurement locations. To achieve this a GPS receiver is used. At least four GPS signals are tracked to determine the code and carrier ranges, from which the position can be derived. The accuracy improves when using more GPS satellites and by averaging over many measurements. The latter is achieved in ground processing with a model-based orbit prediction, resulting in cm accuracy. The main error contributions in the processing are often measurement errors due to satellite multi-path effects. The multipath effects are characterized by measuring the antenna on a 1.5 m mock-up, representing the 9 m long satellite. In order to verify that the mock-up is representative, extensive electromagnetic simulations were made. The simulations included the antenna and the complete satellite and were then reduced to the antenna and a section of the satellite. The actual design of the antenna was performed with several levels of software. First, a fast bodies-of-revolution simulation found a geometry with the right coverage. Then, a finite element method simulation allowed us to match the antenna at two frequencies simultaneously.     

中国运载火箭技术发展

中国航天运输系统建设起步于20世纪60年代,经过近50年的发展,取得了举世瞩目的成就,建设了布局合理、覆盖全面的空间运输系统体系,能够将不同有效载荷发射到低、中、高不同轨道。国际合作方面,在搭载发射、商业卫星发射服务和在轨交付3个方面也取得了一定成绩。对中国航天运输系统发展成就进行了总结,对航天运输系统未来发展特别是人工智能技术应用进行了展望。     

抽屉式标准机柜地面通风换热性能的研究

通过抽屉式标准机柜通风换热性能的地面实验研究和数值模拟,分析了在侧进上出和下进上出两种方式下,进风流量、风道通风孔宽度及自然对流对机柜地面通风换热性能的影响。结果表明,在一定范围内增加机柜进气流量和减小通风孔尺寸可改善机柜通风换热性能。此外,对于本文所研究两种进出风口布置方式,在相同的参数状态下,机柜在微重力状态下的通风换热性能优于地面状态或者相当,因此,满足标准机柜地面状态换热要求的设计参数也会满足微重力状态的换热要求。     

航天飞机在飞行时的损害评估

文章介绍了用约翰逊空间中心超高速碰撞试验设备(HIT-F)上的BUMPER计算程序,对航天飞机观察窗表面在低地球轨道(LEO)环境受到超高速碰撞时的损害进行预测,并与实际损害情况进行了比较。     

Laser measurements to space debris from Graz SLR station

In order to test laser ranging possibilities to space debris objects, the Satellite Laser Ranging (SLR) Station Graz installed a frequency doubled Nd:YAG pulse laser with a 1 kHz repetition rate, a pulse width of 10 ns, and a pulse energy of 25 mJ at 532 nm (on loan from German Aerospace Center Stuttgart – DLR). We developed and built low-noise single-photon detection units to enable laser ranging to targets with inaccurate orbit predictions, and adapted our standard SLR software to include a few hundred space debris targets. With this configuration, we successfully tracked – within 13 early-evening sessions of each about 1.5 h – 85 passes of 43 different space debris targets, in distances between 600 km and up to more than 2500 km, with radar cross sections from >15 m² down to <0.3 m², and measured their distances with an average precision of about 0.7 m RMS.     

柱面菲涅耳太阳聚光透镜的光学设计和光学效率

研究了柱面线聚焦菲涅耳太阳聚光透镜的光学设计和光学效率。依据理论分析，对透镜参数进行了优化设计，成功地研制出了柱面线聚焦菲涅耳聚光透镜。还分析了透镜相对孔径（F数）和成型模具等因素对透镜光学效率的影响。     

卫星抗辐射加固技术

分析了FY－1C卫星运行轨道空间辐射环境，介绍了整星、单机、器件抗辐射要求。卫星研制过程中，对各单抗和系统在技术设计、元器件设计、软件编制等的抗辐射加固设计要求。特别对有CPU和存储器的单粒子翻转效应（SEU）和闩锁效应（SEL）试验。仪器和系统的软件均用故障注入的方法完成了抗SEU的仿真试验。