The management of stray radiation issues in space optical systems

The performance of infrared and submillimeter systems can be severely degraded by stray light. Stray light includes off-axis radiation, system diffraction and scattering effects, and thermal self-emission. The purpose of this paper is to identify several keys to preventing system degradation due to stray radiation. The first key is to apply stray light design rules and analysis techniques early in the program before the design is finalized. A systems level analysis using stray light analysis software is often necessary in order to identify more subtle problems and to assess the magnitude of their effect on system performance. Another key is to address contamination control and the choice of surface coatings early in the program. The management of stray radiation issues is extremely cost-effective, if begun early in the program, and can reduce later schedule hardships.     

积分球在实验室内用于空间遥感器的辐射定标

文中介绍了国外可见光实时传输型航天遥感器在发射前使用积分球对其进行大气条件下辐射定标的技术,得出的定标系数A用于图像的辐射校正。阐述了积分球的设计原理与方法。计算了内壁涂料光谱反射率、光源功率、光源分布色温以及安放位置对积分球出射窗口输出辐亮度的影响。设计球体达到的基本指标为:球体直径Φ=1600mm,开口直径φ=300mm,最低级识分辐亮度(0.45～0.52μm)时L=1.03W/m~2.str,最高级L=12.79W/m~2.str,朗伯特性(中心点)±30°内优于1％,开口面均匀性η=0.9％,辐亮度不确定度δ=6％。用该球对CCD相机定标,结果与用“6S”软件计算的相一致。     

系统化软件复用的成功因素

本文根据国外一些著名软件企业在软件复用方面的实践经验,介绍了系统化软件复用方法，并对软件复用的成功因素进行了分析和评述。     

空间目标监视雷达技术探讨

本文分析了空间目标分布特性和国外空间目标监视技术发展趋势，提出了我国发展空间目标监视雷达需要注重研究的关键技术。     

Lunar Reconnaissance Orbiter Overview: The Instrument Suite and Mission

NASA’s Lunar Precursor Robotic Program (LPRP), formulated in response to the President’s Vision for Space Exploration, will execute a series of robotic missions that will pave the way for eventual permanent human presence on the Moon. The Lunar Reconnaissance Orbiter (LRO) is first in this series of LPRP missions, and plans to launch in October of 2008 for at least one year of operation. LRO will employ six individual instruments to produce accurate maps and high-resolution images of future landing sites, to assess potential lunar resources, and to characterize the radiation environment. LRO will also test the feasibility of one advanced technology demonstration package. The LRO payload includes: Lunar Orbiter Laser Altimeter (LOLA) which will determine the global topography of the lunar surface at high resolution, measure landing site slopes, surface roughness, and search for possible polar surface ice in shadowed regions, Lunar Reconnaissance Orbiter Camera (LROC) which will acquire targeted narrow angle images of the lunar surface capable of resolving meter-scale features to support landing site selection, as well as wide-angle images to characterize polar illumination conditions and to identify potential resources, Lunar Exploration Neutron Detector (LEND) which will map the flux of neutrons from the lunar surface to search for evidence of water ice, and will provide space radiation environment measurements that may be useful for future human exploration, Diviner Lunar Radiometer Experiment (DLRE) which will chart the temperature of the entire lunar surface at approximately 300 meter horizontal resolution to identify cold-traps and potential ice deposits, Lyman-Alpha Mapping Project (LAMP) which will map the entire lunar surface in the far ultraviolet. LAMP will search for surface ice and frost in the polar regions and provide images of permanently shadowed regions illuminated only by starlight. Cosmic Ray Telescope for the Effects of Radiation (CRaTER), which will investigate the effect of galactic cosmic rays on tissue-equivalent plastics as a constraint on models of biological response to background space radiation. The technology demonstration is an advanced radar (mini-RF) that will demonstrate X- and S-band radar imaging and interferometry using light weight synthetic aperture radar. This paper will give an introduction to each of these instruments and an overview of their objectives.     

超音速燃烧冲压发动机最佳设计参数

本文对超音速燃烧冲压发动机设计参数进行优化。从产生推力与发动机热力循环两方面综合分析得到了以下结果:作为空天飞机动力装置的超音速燃烧冲压发动机,在M_H=6-6.6飞行范围内,按照等面积和等M数分段加热的热力循环设计时,比冲最大;在M_H=6.6-10飞行范围内,按照等面积和等温分段加热的热力循环设计时,比冲最大。从而得到最佳设计参数,并在此基础上,用一元流方法计算了有面积变化,有化学反应、摩擦和散热损失时,超音速燃烧冲压发动机的性能。     

红外与可见光图像融合的空间碎片识别方法

针对暗弱空间环境中空间碎片的识别问题,提出了一种光照不均匀环境中的空间碎片识别方法。不同于现有识别方案,该方法从光照不均匀导致空间碎片图像源细节丢失造成识别性能下降的角度出发,首先将空间碎片的红外和可见光图像进行深度融合,并建立空间碎片融合图像数据库,然后基于训练样本采用深度学习技术训练得到空间碎片识别模型。算法分析表明,该图像融合方案具有高度的细节保留能力,识别模型具有在暗弱环境中高精度目标识别能力。最后进行了仿真实验,实验结果表明,该识别方案在姿态变化、图像源亮度变化等干扰条件下都具有较好的鲁棒性。     

基于空间卫星综合应用系统的天气预报业务框架构建

围绕空间卫星综合应用系统，在介绍天气预报业务系统基本框架的基础上，着重分析了天气预报业务化框架、网络的技术特点，以及天气预报业务的一些技术和方法．     

基于DIS的空战仿真系统的应用实现

针对现代高技术条件下航空武器系统作战效能评估在任务与功能上的客观需求,基于分布交互仿真的设计思想,进行了空战仿真系统的实现方案研究.提出了方案的体系结构和功能划分,介绍了其中所涉及的若干关键技术,并分析了在一个虚拟作战环境下利用该系统开展的有关空战仿真的相关实验研究.仿真结果表明,较之传统的飞机作战效能评估方法,新系统在拓展仿真的内容与规模,增强仿真的逼真感和可信度等方面都显示出其独特的优势和良好的应用前景.     

喷射式气氮调温系统

气氮调温系统是空间环境模拟器中为航天器进行热真空、热平衡试验的关键系统之一。它可使热沉温度在－100℃－＋100℃之间连续可调，并能任意定点。采用喷射式气氮调温系统，与液氮储槽式冷却器调温系统、液氮温度热沉加红外加热笼系统相比，可降低能耗，节约经费。大型空间环境模拟器中由于热沉的热惯性较大以及各支路温度存在均匀性等问题，大型空间模拟器设备要应用喷射式气氮调温系统存在一定难度。KM6大型空间模拟器喷射式气氮调温系统在研制中结合KM6实际和试验要求。调试和使用结果证明这一系统满足试验要求，同时也表明该系统在同一领域达到了国际同类设备的水平。