ADINA软件在固体发动机设计中的应用

简要介绍了大型结构分析软件ADINA的主要功能、特点、求解过程,以及应用它对某型号发动机药柱进行的轴对称有限元分析.结果表明,ADINA软件应用于固体火箭发动机结构分析是可行的.     

固体燃料冲压发动机自持燃烧的影响因素

采用试验和仿真方法,研究了固体燃料冲压发动机(SFRJ)自持燃烧的主要影响因素。研究结果表明:SFRJ内为典型的扩散火焰,化学反应特征时间与反应物停留特征时间的比值是影响发动机自持燃烧的关键参数,该值越小,扩散火焰越稳定;本文研究工况下,较小的后台阶高度即可保证发动机实现自持燃烧,后台阶稳定火焰的物理原因是在固体燃料表面附近形成一个低速区,保证了固体燃料的分解燃烧,当台阶高度为0时,由于化学反应特征时间与反应物停留特征时间的比值迅速增加,SFRJ无法自持燃烧;台阶高度较小时,点火过程会对SFRJ的稳定燃烧产生影响,SFRJ可能会出现熄火复燃现象。     

A fast arc fault detection method for AC solid state power controllers in MEA

Arc fault detection is desperately required in Solid State Power Controllers (SSPC) in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform (FFT) and Wavelet Packets Decomposition (WPD) have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current (AC) arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover, experimental verification results have also been provided.     

Contribution of ionospheric TEC anomalies to detecting the seismic precursors related to the 2008 Oran-Algeria event

The ionospheric anomalies observed before any notable earthquake have become the subject of predictive research in the field of seismo-ionospheric coupling and/or Solid Earth-Atmosphere. In this paper, the concept of ionospheric modeling has been applied using total electronic content (TEC); derived from dual-frequency GPS recordings from about sixty permanent geodetic stations. The study and the analysis of the anomalous TEC variations, quantifiable on a regional scale, allowed us to detect the principal precursors of the M_w 5.5 earthquake that hit Oran on June 06th, 2008. The envisaged analytical approach is based principally on the time delays estimation relating to the seismic responses from the triggering (lithospheric seismic source) until their recording in data Rinex (GPS_IGS stations) through the reflection system of the electromagnetic waves on the ionospheric level (F2-layer).Indeed, in term of location, the longitude-latitude coordinates of the Oran event epicenter (0.658°W, 35.883°N) affecting the coastal margin of Western Algeria without too much material damage. Although the magnitude of this earthquake is qualified moderate (M_w 5.5, seismic intensity scale V-VI), one can observe apparent disturbances in the terrestrial electromagnetic spectrum associated with ionospheric TEC variations. In the domain of geodetic data analysis, we have noted a significant increase in the ionospheric TEC, which announces the arrival of a seismic precursor several days before the main studied event. Against this background, we emphasize that any seismic event, of significant magnitude, often carries information associated with other variants involved in the package of earthquake studied. Among these variants we evoke the effect of the magnetic field and the effect of the surrounding environment, etc. As for the specific behavior of the GPS_TEC signal, obtained from the Rinex data, and its interaction with the associated seismic activity, we highlight the existence of a spectral conformity between the geomagnetic field and that of the TEC content (spontaneous polarization of the TEC).Finally, we have just confirmed the effectiveness of this forecasting approach which relates the seismo-ionospheric precursors that are embedded in the physical trace of the electromagnetic signal relative to significant and/or moderate earthquakes (M ≥ 5); such as the envisaged case of the 2008 Oran event.     

固体材料热物性参数智能测试系统设计与研制

为实现厚度较薄固体板状材料热物性的准确测试。基于平行热线法基本原理,将温度测点由原来与热线平行布置,改为试样厚度方向布置,并考虑热穿透效应的影响,利用数值解法结合计算机编程直接测算材料热导率及热扩散率。研制了热物性智能测试系统,对硼硅玻璃、石棉、硅藻土耐火砖等进行热物性测试实验,结果表明与国家标准测试方法测试值和文献值较为吻合。考虑热穿透效应的影响,通过适当的数据处理手段,不用通过熔融加厚也可实现薄固体板状材料热物性的准确测试,有效拓展了热线法应用范围。     

固体火箭发动机燃烧不稳定性预估

本文以Culick线性理论为基础,提出预估固体火箭发动机燃烧不稳定性的方法,并给出一个算例.讨论了提高微粒阻尼预估精度和考虑平均流动影响的问题.首次提出用统计方法评定燃烧不稳定性、给出发生燃烧不稳定概率的方法,并讨论了这种统计方法的合理性和可行性.     

消除侵蚀压力峰的一种工程设计

本文提出了侵蚀燃烧所产生的压力峰补偿增面燃烧段低压部分的构想,从而达到在实际上消除初始压力峰的目的.并且通过设计实例及其实验结果,说明了这一方法在工程实践中的具体应用及其有效性.     

固体发动机试车燃气的扩散及对环境的影响

对地处复杂山区的固体火箭发动机试车站的燃气组成及燃气在大气中的扩散和对环境的影响,采用理论预测、数学模式和监测相结合的方法进行了系统研究,配合进行了同步的气象特征研究.评估了不同大气稳定度下污染浓度的分布,提出了有效的防污染措施.     

固体推进剂体积模量主曲线试验研究

采用非接触测量体积模量系统，测出复合固体推进剂在不同温度下的体积驰模量和体积里面变柔量，并依据时间－温度等效原理迭加拟合求得了体积模量主曲线和温度移动固子的数学表达式，其结果要吧动机药柱结构整性化分析提供依据。     

玻璃钢圆筒壳体内压下的变形及破坏强度

本文以线弹性薄膜理论为基础对固休火箭发动机玻璃钢筒体内压下变形,同时应用最小余能原理对其破坏强度问题分别进行了理论分析与计算.通过对全尺寸壳体的变形测试和爆破压力试验,以及对标准容器进行的批量爆破试验,证实理论分析基本符合试验结果.