卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

现代小卫星与大众化空间时代

通过论述现代小卫星技术30年的发展历程,总结其技术发展水平并举出现阶段的典型应用实例,讨论小卫星未来的发展方向,论述大众化空间与现代小卫星的关系,总结现代小卫星技术服务于大众化空间的各项特征。     

航天器的数字化总装设计研究

文章总结了航天器数字化总装设计的基本思路、方法和经验，阐明了数字化总装设计所发挥的作用和意义。     

绳系卫星部署阶段的动力学分析

绳系卫星系统部署阶段末时刻状态决定着其编队飞行的初始状态，为了研究不同因素对绳系卫星系统部署阶段运动的影响，本文建立了一种简单的平面哑铃模型，将系绳视作有阻尼的弹簧，两个卫星视作刚体，考虑重力梯度力矩。通过仿真，发现系绳释放的速度和副星推力是影响绳系卫星系统部署阶段稳定性的主要因素。     

基于拉盖尔函数的卫星姿态预测控制方法

针对卫星在空间站中进行绕飞检测时的姿态控制问题，考虑卫星的姿态轴需要躲避禁飞区域并指向期望位置，提出了一种基于拉盖尔函数的模型预测控制方法，实现了对卫星姿态轴的控制。在模型预测控制方法的基础上，通过拉盖尔函数，将优化多个控制输入转换为优化少数的拉盖尔系数，建立了拉盖尔模型预测的控制策略，改善了传统的模型预测控制方法计算效率差的问题，减少了优化时间。采用卫星在空间站中绕飞的模型进行数值仿真验证，结果表明该方法能够使卫星的姿态轴躲避禁飞区并到达指定位置。与传统方法相比，这种基于拉盖尔函数的模型预测控制策略能够提高优化效率，减少计算时间。     

Innovation and change? The evolution of Europe's small satellite manufacturers

Since the 1980s a trend has emerged to contain the cost of space missions, which has favored trials in the construction and launch of small satellites. This effort has considerably reduced the cost of the satellites because the construction process uses both traditional components and important technological innovations. There have also been market openings for small satellites, both within the telecommunication sector and for scientific missions and those related to Earth observation. This paper contains the results of a survey of the largest manufacturers of small satellites in Europe and investigates how far (if at all) they have changed the structure of the European space industry. It finds that, through the acquisition of small satellite manufacturers, traditional large companies operating in the field of space in Europe have secured for themselves important technological innovations and market opportunities, while maintaining their oligopolistic position.     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

资源三号卫星廊坊地区遥感数据的融合处理

本文以资源三号卫星河北省廊坊地区2A级全色遥感影像和多光谱影像数据为基础,采用遥感数字图像处理软件ERDASIMAGINE进行了研究区域的提取,并对提取的感兴趣区进行了几何校正,即图像配准处理,然后进行了融合处理,分别采用了空间增强的分辨率融合算法、改进IHS分辨率融合算法以及小波分辨率融合算法,通过和融合前的影像进行对比,融合后的影像既保留了多光谱影像的丰富的波谱信息,同时具有了全色影像的高空间分辨率的特征,最后对比三种融合算法,得出改进的IHS分辨率融合算法效果最佳。