利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

一种小样本和小失效数系统可靠性分析方法

根据小样本和小失效数系统的特点，以及可靠性分布函数和参数估计的不确定性和模糊性，提出了一种可靠性分析方法。采用指数分布族，通过分析最少和最大失效数两种最极端状态，确定中间状态的备选点，运用最小平方差原理进行逐个筛选，并给出了算法流程。分析结果表明，计算值与实际观测值较为吻合。该方法可使系统可靠性的估计精度有较大提高。     

现代小卫星发展概述

为了区别早期发射的小型卫星，目前的小型卫星统称为现代小卫星。这种卫星在“沙漠惊雷”，“沙漠之狐”和北约空袭南联盟的战争中起到了异乎寻常的作用。简要分析了现代小卫星的概念、发展前提，发展趋势和模式等，并对发展小卫星提出了自己的见解。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

Future spacelift projections

In 1996 the NASA Advisory Council asked for a comprehensive look at future launch projections out to the year 2030 and beyond. In response to this request NASA sponsored a study at The Aerospace Corporation to develop long-range space transportation models for future commercial and government applications, and to analyze the design considerations and desired characteristics for future space transportation systems. Follow-ons to present space missions as well as a wide array of potential new space applications are considered in the study. This paper summarizes the space transportation system characteristics required to enable various classes of future missions. High reliability and the ability to achieve high flight rates per vehicle are shown to be key attributes for achieving more economical launch systems. Technical, economic and policy implications are also discussed.     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。     

空间小推力发动机推力室喷注器的设计与身部冷却问题

介绍了空间小推力双组元液体火箭发动机推力空头部喷注器设计的某些特点和身部冷却的一些问题，具体地讨论了几种喷注器设计方案和简述了身部液膜／辐射冷却的机制，并给出某些情况下估算壁温的方法。     

大型弹体发射速度测量方法的研究

大弹体的发射速度是各种弹体飞行控制中的重要参数。由于弹体尺寸大、发射时间短等原因，因而对发射速度的快速实时测量难于保证精度。本文提出一种“双测头光电反射式速度测量系统”，它采用“双路平衡式光电传感系统”接收信号，可实现各种大型物体（如导弹、火箭）的发射速度测试，在0－50m/s内，其相对误差小于1％，且安装调工方便，方法具有实用价值。