不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。     

简单实用的步进电机驱动电源

本文介绍了利用ＥＰＲＯＭ芯片构成步进电机的驱动电源，并对驱动电源及频率混同电路进行了分析和设计。     

Influence of ionospheric perturbations in GPS time and frequency transfer

The stability of GPS time and frequency transfer is limited by the fact that GPS signals travel through the ionosphere. In high precision geodetic time transfer (i.e. based on precise modeling of code and carrier phase GPS data), the so-called ionosphere-free combination of the code and carrier phase measurements made on the two frequencies is used to remove the first-order ionospheric effect. In this paper, we investigate the impact of residual second- and third-order ionospheric effects on geodetic time transfer solutions i.e. remote atomic clock comparisons based on GPS measurements, using the ATOMIUM software developed at the Royal Observatory of Belgium (ROB). The impact of third-order ionospheric effects was shown to be negligible, while for second-order effects, the tests performed on different time links and at different epochs show a small impact of the order of some picoseconds, on a quiet day, and up to more than 10 picoseconds in case of high ionospheric activity. The geomagnetic storm of the 30th October 2003 is used to illustrate how space weather products are relevant to understand perturbations in geodetic time and frequency transfer.     

Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.     

超声波流量计不同运算方式对比分析

温度漂移是影响超声波流量计测量精度的一个重要因素,本文从算法上提出一种不受其影响的数学模型,以使相应的硬件简单化.该方法已应用在超声波流量计中,收到了很好的效果.     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

《高频电子线路》课程“相乘器”教学策略

相乘器是高频电子线路课程中的一个重要单元电路。掌握相乘器的组成、基本原理、分析方法以及器件特点是通信电子信息类学生学好调制、检波以及混频电路的关键所在,讨论非线性器件二极管在开关状态下组成"相乘器"的教学策略对教学活动具有重要意义。     

Boundary condition modelling and identification for cantilever-like structures using natural frequencies

The actual boundary conditions of cantilever-like structures might be non-ideally clamped in engineering practice, and they can also vary with time due to damage or aging. Precise modelling of boundary conditions, in which both the boundary stiffness and the boundary mass should be modelled correctly, might be one of the most significant aspects in dynamic analysis and testing for such structures. However, only the boundary stiffness was considered in the most existing methods. In this paper, a boundary condition modelling and identification method for cantilever-like structures is proposed to precisely model both the boundary stiffness and the boundary mass using sensitivity analysis of natural frequencies. The boundary conditions of a cantilever-like structure can be parameterized by constant mass, constant rotational inertia,constant translational stiffness, and constant rotational stiffness. The relationship between natural frequencies and boundary parameters is deduced according to the vibration equation for the lateral vibration of a non-uniform beam. Then, an iterative identification formulation is established using the sensitivity analysis of natural frequencies with respect to the boundary parameters. The regularization technique is also used to solve the potential ill-posed problem in the identification procedure.Numerical simulations and experiments are performed to validate the feasibility and accuracy of the proposed method. Results show that the proposed method can be utilized to precisely model the boundary parameters of a cantilever-like structure.     

某型干扰机干扰效果提升研究

通过研究某型干扰机对多普勒雷达速度跟踪系统的干扰方式，分析假多普勒频率产生的干扰工作机理，研究对抗科目训练中该模式干扰效果不佳的具体原因，提出了采用数字移向技术替代行波管移相，增大对雷达回波原载频的抑制度，增强干扰效果。通过对样机的测试验证，给出了两种移相电路的假多普勒干扰比较。