搅拌摩擦加工调控镁合金组织与耐腐蚀性能的发展现状与趋势

近年来,航空航天领域轻量化进程发展迅速,镁合金在其中扮演着越来越重要的角色.然而,镁合金耐腐蚀性不佳的特点制约了镁合金的应用范围.本文综述了搅拌摩擦加工技术调控含第二相镁合金耐腐蚀性能的研究现状,从动态再结晶和加速第二相破碎、固溶两个角度,论述了搅拌摩擦加工调控镁合金组织的基本原理,并分析了搅拌摩擦加工改善含粗大第二相...     

基于图像特征分类和RBF网络的两轴车辆动态称重技术

汽车在行驶过程中的总重信号通常由各轴重信号确定,各轴重信号的测试精度取决于对车辆运动参数和振动信号等的精确分析。本文采用径向基函数(Radial basis function,RBF)网络处理轴重信号,针对该网络的泛化能力与拟合精度的矛盾,将车辆按照重量分为大、中、小3种类型,并进行整车建模和网络训练;实际测试过程中,利用汽车俯视图像提取类型特征,然后根据汽车的类型将测试参数输入不同的神经网络进行处理,以静态测量结果为相对真值。仿真结果表明,分类建模比单一混合建模具有更高的测试精度。     

一种基于频谱拟合的信号去噪方法

通常我们采用Fourier变换的方法对信号进行去噪 ,本文尝试提出一种新的方法滤除高频噪声与干扰以解决Fourier变换去噪的缺陷 ,在此称为频谱拟合去噪方法。     

低轨卫星的北斗反射信号海洋覆盖分析

北斗系统作为我国自行研制的导航系统，具有独特的混合星座特性，其反射事件在海洋上的空间分布和覆盖性能的研究成果较少。针对上述问题，模拟了北斗三号（Beidou System 3，BDS3）以及全球定位系统（Global Positioning System，GPS）空间星座，模拟不同性能参数的低轨接收卫星，在此仿真系统的基础上，计算反射事件在各仿真场景下的海洋覆盖率以及同时发生反射事件的卫星数量。结果表明：BDS3与GPS相比具有更大的反射事件海洋覆盖率，覆盖性能更优；仿真周期7天与1天相比,前者卫星产生的反射事件海洋覆盖率约为后者5倍；低轨道卫星（Low Earth Orbit,LEO）轨道高度越高，天线波束角度越大，反射事件海洋覆盖率越大；3颗LEO卫星下同时发生反射事件卫星数的平均值约为单颗LEO卫星的3倍。可通过设计多星组网来提高反射事件海洋覆盖率。研究结果对星载反射技术海洋遥感应用方面有一定的参考价值。     

一种适用于遥感图像的可逆信息隐藏算法

可逆信息隐藏技术，可用于实现遥感图像重要目标区域的无损传输。通过对现有可逆信息隐藏算法进行研究，发现现有算法的单次嵌入容量不足，且需要额外的无损二值压缩处理附加信息，无法满足遥感图像处理的有效性和实时性要求。借助给定门限对载体图像不重叠子块的平滑性进行划分，通过编码平滑子块内基准像素与其余像素之差，并结合比特替换，实现秘密信息的可逆隐藏。对于512×512像素的灰度遥感图像，单次嵌入容量可达5×105 bit以上。试验结果表明，该算法可实现单次高嵌入容量的可逆隐藏，并不需要任何额外无损二值压缩来处理辅助信息。     

Data processing center of RadioAstron space VLBI project

In this paper, questions on development, implementation, and operation of RadioAstron project Data Processing Center (DPC) are reviewed. The main components of the dedicated DPC are the computer complex with 1 TFlops/s performance, storage with memory capacity of approximately 10 PB, the network infrastructure, and the corresponding communication channels. Performance enhancement methods and resolution of information storage, archiving, and process problems of space VLBI high-speed digital data flows are analyzed. It is shown that successful operation of DPC is mainly provided by optimal organization of computer system structure, storage, and networking transmission. Some of the important key features of RadioAstron project DPC and its comparative differences from the standard VLBI procedures are considered.     

High-performance altimeter Doppler processing for measuring sea level height under varying sea state conditions

This paper describes an innovative method for processing nadir altimeter data acquired in Synthetic Aperture Radar (SAR) mode, enhancing the system performances over open ocean. Similarly to the current SAR data processing scheme, the so-called LR-RMC (Low Resolution with Range Migration Correction) method, originally designed by Phalippou and Demeester (2011), includes Doppler beam forming, Doppler shift correction and range correction. In LR-RMC, however, an alternative and less complex averaging (stacking) operation is used so that all the Doppler beams produced in a radar cycle (4 bursts of 64 beams for the open-burst Sentinel-3-mode altimeter) are incoherently combined to form a multi-beam echo. In that manner, contrarily to the narrow-band SAR technique, the LR-RMC processing enlarges the effective footprint to average out the effects of surface waves and particularly those from small sub-mesoscale structures (<1 km) that are known to impact SAR-mode performances. On the other hand, the number of averaged beams is as high as in current SAR-mode processing, thus providing a noise reduction at least equally good. The LR-RMC method has the added benefit of reducing the incoherent integration time with respect to the SAR-mode processing (50 ms compared to 2.5 s) limiting possible surface movement effects. By processing one year of Sentinel-3A SRAL SAR-mode data using the LR-RMC method, it is shown that the swell impact on the SAR altimeter performances is totally removed and that an improvement of 10–50% is obtained in the measurement noise of the sea surface height and significant wave height with respect to SAR mode. Additionally, observational capabilities over the middle scales are enhanced potentially allowing the ocean mesoscale features to be retrieved and observations assimilated more usefully in ocean models.     

5kW离子电推进大功率屏栅电源的设计研究

本文针对航天器用5kW离子电推力器核心供电模块屏栅电源的技术需求,采用移相全桥技术设计了低电压输入高电压输出的大功率屏栅电源模块。对比分析了ZVS和ZVZCS两种移相全桥方案后,得出ZVZCS更适合于电推进屏栅电源的设计。提出了ZVZCS移相全桥变换器CDD无损缓冲电路中辅助电容的设计方法,论述了屏栅电源功率级和控制电路的设计过程。通过实物产品验证表明：采用ZVZCS移相全桥技术设计的屏栅电源模块能在较宽的负载范围内实现超前桥臂和滞后桥臂的软开关,提高了变换器的效率;采用CDD无损缓冲电路能辅助实现滞后桥臂的零电流关断,降低原边电流的损耗,同时降低高压整流管的电压应力。在具备完善的输入滤波,浪涌抑制及母线开关等功能以后,最大功率下效率在95%以上。     

最小二乘法在复杂曲面拟合中的应用

针对复杂曲面,讨论了怎样利用最小二乘法求解非线性曲线的数据拟合问题,基于VB与Matlab进行了数据处理系统软件的设计,实验结果表明,此算法具有良好的拟合效果,并在实际工程项目中通过了检验.