Molecular analysis of the graviperception signal transduction in the flagellate Euglena gracilis: Involvement of a transient receptor potential-like channel and a calmodulin

Euglena gracilis, a unicellular, photosynthetic flagellate is a model system for environmentally controlled behavior responses. The organism shows pronounced negative gravitaxis. This movement is based on physiological mechanisms, which in the past had been only indirectly assessed. It was shown that mechano-sensitive calcium channels are involved in the gravitaxis response. Recent studies have demonstrated that members of the transient receptor potential (TRP) family function as mechano-sensitive channels in several different cell types. We have sequenced part of a TRP gene in Euglena and applied RNA interference (RNAi) to confirm that these channels are involved in graviperception. It was found that RNAi against the putative TRP channel abolished gravitaxis. The genes of three calmodulins were sequences in Euglena, one of which was previously known in its protein structure (cal 1). The other two were unknown (cal 2 and cal 3). Cal 2 has been analyzed in detail. The biosynthesis of the corresponding proteins of cal 1 and cal 2 was inhibited by means of RNA interference to see whether this blockage impairs gravitaxis. RNAi of cal 1 leads to a long-term loss of free swimming in the cells (while euglenoid movement persists). It induced pronounced cell form aberrations and the division of cells was hampered. After recovery from RNAi the cell showed precise negative gravitaxis again. Thus cal 1 does not seem to be involved in gravitaxis. In contrast, the blockage of cal 2 has no pronounced influence on motility and cell form but leads to a complete loss of gravitactic orientation for more than 30 days showing that this calmodulin is an element in the signal transduction chain. The data are discussed in the context of the current model of the gravitaxis signal transduction chain in Euglena gracilis.     

基于上下位机体系结构的飞机组合传动发电机负载管理技术研究

根据组合传动发电机试验的负载特点,总结了组合传动发电机试验负载管理的一般要求,并进行了负载系统设计、负载管理策略研究,最后通过用Labview和西门子S7-200小型PLC组成的上下位机体系结构实现了负载自动化管理并在某组合传动发电机通用试验台上成功应用.     

双信号标准失真源

讲述了相关和不相关谐波两类标准失真源,阐述了不相关型标准的殆周期函数理论基础,并讨论了波的干涉问题。     

气流扬声器的声辐射和它的测量

对大功率气流扬声器的声辐射进行了实验研究，给出了研制大功率气流扬声器的在不同典型条件下用不同声功率测量方法所测得的声功率数据并进行了分析，还对气流扬志器的低频声辐射和多个气流声器的组合进行了实验，给出的有用结果可供高声强实验室设计参考。     

基于DOE方法超紧凑S型进气道被动流动控制优化设计

采用实验设计（DOE）方法对影响超紧凑进气道流动控制效果的五个因素进行优化设计。采用数值源项模型代替真实物理叶片进行流场求解，分析了27组涡流发生器应用于进气道流动控制的效果，从中找出各影响因素变量对进气道总压恢复、流场畸变不同影响，应用响应曲面法给出最佳影响因素组合，为超紧凑进气道被动流动控制设计提供技术参考。     

循油冷却航空交流发电机三维温度场的网络拓扑法求解

 本文讨论求解循油冷却航空交流同步发电机的三维温度场的方法,用网络拓扑法求解的基本分块原则以及单元热导的计算,总体热导矩阵的形成方法,损耗和边界条件的处理方法,给出了计算循油冷却电机中油路及气隙部份的对流换热系数计算公式。为减少计算时间,将定、转子分别计算后组合求解,文章最后给出某循油冷却航空交流发电机的定、转子温度分布,并画出了定、转子最热部份的平面温度分布图以及转子绕组沿槽高的温度分布图。     

微型计算机数据采集与处理的小型系统

介绍了一种利用微型计算机进行数据采集与处理的小型系统。文中对系统的硬件配置，性能和特点以及软件的编制原则，方法和应用细节等，均作了简要说明。最后，列举了常规数据和高频动态信号的采集，处理结果实例。本文对于科学实验与工业上的信号检测研究提供了参考。     

扫描器自动生成系统的设计与实现

SLEX是一个自动生成扫描器的交互开发环境。本文介绍了它的设计与实现。     

数字式频率与波形合成技术及其应用

介绍了实现变频陀螺电源高频率稳定度和高输出波形精度的关键技术——数字式频率合成技术和数字式波形合成技术——的原理 ,并给出了设计电路和测试指标。     

GAP/AN燃气发生剂研制

为了满足火焰药起动器，燃气发生器的特殊要求，研制了一种排气洁净，无烟，无腐蚀，低燃温，低残渣的富能燃气发生剂配方。这种燃气发生剂以聚叠氮缩水甘油醚炎粘合剂，球形，相稳定的改性硝酸铵为氧化剂。该燃气发生剂热稳定性好，在大气中燃无可见烟雾，燃速为２．３－５．８ｍｍ／ｓ，燃速压强指数为０．５５燃温小于１２００℃，燃烧残渣含量为２．８％。力学性能满足使用要求。