应用于毫米波反射计的多项式校准方法

为了在毫米波波段准确测量波导器件的反射系数,提出了一种应用在反射系数测试前端(反射计)中的校准方法.该校准方法采用基于多项式的误差模型,使得每一个误差项的求解都转化成一个求解轨迹圆圆心的问题,同时不影响求解精度.采用一个滑动负载、一个滑动短路和一个短路器,在毫米波波段降低了对标准件理想程度的要求.实验中搭建了一个Ka波段的反射计,图解误差项的求解过程,分析了误差项的物理意义.把校准后的测量结果与商用矢量网络分析仪(VNA,Vector Network Analyzer)进行比较,吻合较好.同样比较了一组W波段反射计对波纹喇叭的测量结果,进一步验证了方法的合理性.      

Rocket observations of propagating waves in the night time equatorial F-region over Brazil

A Brazilian SONDA III rocket carrying plasma diagnostic experiments was launched from the Brazilian rocket launching stations in Alcântara (2.31°S, 44.4°W Geog. Lat.) to measure the height profiles of electron density, electron temperature and the ambient electric field. High frequency capacitance probe was used to measure the height profile of the electron density and the Langmuir probe was used to measure the electron density and the spatial structures of plasma irregularities. An electric field double probe was used to measure the electric field fluctuations associated with the F-region plasma irregularities. Spectral analysis of the fluctuations in electron density and electric field indicated the presence of propagating waves in the night time F-region over a large height range. The electron temperatures estimated from the LP data showed abnormally high values in the base of the F-region during the upleg of the rocket and practically normal values in the same height region during the downleg. A brief study of the characteristic features of the spectra of electron density and electric field fluctuations and the associated electron temperature variations are presented and discussed here.     

月球探测器软着陆机构着陆腿模型与仿真分析

给出了着陆动力学分析的数学模型,并在分析铝蜂窝材料缓冲特性的基础上,建立了 铝蜂窝缓冲器模型,将其应用于软着陆机构单条着陆腿冲击仿真。仿真结果表明,该模型在 缓冲行程、能量吸收及缓冲后加速度响应峰值等方面与试验结果基本一致。为软着陆机构着 陆冲击动力学分析时铝蜂窝建模提供参考。     

氢氧发动机真空羽流干扰试验研究

为了研究航天器发动机多股羽流产生的羽流干扰对流场结构及参数的影响,在北京航空航天大学真空羽流效应试验系统（PES）中,采用总压皮托管阵列对60 N氢氧模拟发动机单机羽流和双机干扰羽流的压力场进行了测量。试验结果表明:单机羽流流场压力随着轴向距离的增大而迅速降低;受到钟形喷管产生的压缩波束影响,同一轴向距离上的压力最大值逐渐偏离喷管轴线;双机羽流干扰发生于两股发动机羽流主流之间的区域,干扰流的作用范围和强度随着轴向距离的增大而增大,干扰流压力最高可以达到单机羽流相同位置处压力的5倍以上;受到干扰流压缩波束边界的影响,同一轴向距离上的压力最大值逐渐偏离双发动机对称面。      

柱面气相散心爆轰波胞格演化规律研究

本文采用二阶精度NND格式,应用改进的二阶段化学反应模型,通过求解二维Euler方程对柱面气相散心爆轰波胞格演化过程进行了数值模拟.计算结果表明在传播过程中,空间尺度的扩张导致了散心爆轰波后气流的自然膨胀,使得多波结构的爆轰阵面呈现出显著的胞格自组织特性.根据计算结果与理论分析,本文归纳了五种胞格演化模式,分别命名为内凹波阵面会聚、波阵面扭结、褶皱波面失稳、胞格自合并和三波点滑移,并定义了各种模式的物理特征,分析了其相关的演化机制和规律.     

On the early phase of relativistic solar particle events: Are there signatures of acceleration mechanism?

Many physical processes precede and accompany the solar energetic particles (SEP) occurrence on the Earth’s orbit. Explosive energy release on the Sun gives rise to a flare and a coronal mass ejection (CME). X-ray and gamma emissions are believed to be connected with flares. Radio emission is signature of disturbances traveling through the corona and interplanetary space. Particles can gain energy both in the flare and the accompanying wave processes. The beginning of the SEP events has the advantage of being the phase most close to the time of acceleration. Influence of interplanetary transport is minimal in the case of first arriving relativistic solar protons recorded by ground based neutron monitors in so called ground-level enhancements (GLE). The early phase of the SEP events attracts attention of many scientists searching for the understanding of particle acceleration. However, they come to the opposite conclusions. While some authors find arguments for coronal mass ejections as a sole accelerator of SEPs, others prove a flare to be the SEP origin. Here, the circumstances of SEP generation for several GLEs of the 23rd solar cycle are considered. Timing of X-ray, CME, and radio emissions shows a great variety from event to event. However, the time of particle ejection from the Sun is closer to maximum of X-ray emission than to any other phenomena considered. No correlation is found between the particle fluxes and the CME characteristics.     

进口斜激波、膨胀波干扰下等直隔离段内的激波串特性

 超燃冲压发动机的隔离段在实际工作中会受到进气道唇罩激波及肩部膨胀扇的显著干扰,本文针对这一特定问题进行了专门研究。提出了唇罩入射激波及肩部膨胀扇的模拟方法,并利用德国Achen的风洞试验对其进行了检验,而后以此研究了入射激波及肩部膨胀扇干扰下隔离段内激波串的基本形态,并分析了出口反压和激波入射位置的影响。仿真结果表明：当激波串在隔离段内不断前移时,受唇罩入射激波及其反射激波的干扰,其高速核心区交替地偏向上下壁面;与无激波入射的情况相比,此时激波串的耐反压能力显著降低,且入射点位置越高,降低幅度越大,管道内的沿程静压分布规律与Waltrup经验公式偏离程度也越来越大。该文结果可为进气道/隔离段的一体化设计提供依据。     

Geoeffectiveness of interplanetary shocks controlled by impact angles: A review

The high variability of the Sun’s magnetic field is responsible for the generation of perturbations that propagate throughout the heliosphere. Such disturbances often drive interplanetary shocks in front of their leading regions. Strong shocks transfer momentum and energy into the solar wind ahead of them which in turn enhance the solar wind interaction with magnetic fields in its way. Shocks then eventually strike the Earth’s magnetosphere and trigger a myriad of geomagnetic effects observed not only by spacecraft in space, but also by magnetometers on the ground. Recently, it has been revealed that shocks can show different geoeffectiveness depending closely on the angle of impact. Generally, frontal shocks are more geoeffective than inclined shocks, even if the former are comparatively weaker than the latter. This review is focused on results obtained from modeling and experimental efforts in the last 15?years. Some theoretical and observational background are also provided.     

气动弹爆破过程性能仿真分析

针对工业界对于安全有效的管道清洁装置的需求,设计了一种利用气动爆破的原理进行管道除垢的设备.该装置采用气动控制,利用压缩空气的瞬时释放产生的射流与冲击波的能量击碎管道内壁的附着物,实现管道除垢.通过分析装置工作的原理及运行过程,给出了重要参数的建模过程.通过仿真分析了气爆过程中压强、剪切力的分布特点以及传播过程,计算了其管道内气流速度场的分布变化,得出了气动弹爆破过程中对壁面产生的冲击主要来源于射流以及冲击波,并且在使用10MPa的工作压强下一次爆破可清理的管道范围超过160m.该设计可以高效的实现管道清污的作用.