矩阵满秩分解的二种方法

本文详细介绍了求矩阵满秩分解的二种方法，即初等变换方法和Hermite标准形选取方法。     

Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels

The technique of creep feed grinding is most suitable for geometrical shaping, and therefore has been expected to improve effectively material removal rate and surface quality of components with complex profile. This article studies experimentally the effects of process parameters (i.e. wheel speed, workpiece speed and depth of cut) on the grindability and surface integrity of cast nickel-based superalloys, i.e. K424, during creep feed grinding with brazed cubic boron nitride (CBN) abrasive wheels. Some important factors, such as grinding force and temperature, specific grinding energy, size stability, surface topography, microhardness and microstructure alteration of the sub-surface, residual stresses, are investigated in detail. The results show that during creep feed grinding with brazed CBN wheels, low grinding temperature at about 100 °C is obtained though the specific grinding energy of nickel-based superalloys is high up to 200-300 J/mm³. A combination of wheel speed 22.5 m/s, workpiece speed 0.1 m/min, depth of cut 0.2 mm accomplishes the straight grooves with the expected dimensional accuracy. Moreover, the compressive residual stresses are formed in the burn-free and crack-free ground surface.     

数控技术中的高级语言调用低级语言处理

本文通过第1象限直线插补实例说明了用C语言调用汇编语言程序的实现步骤和方法。在本例中既使用了屏幕动态显示运动轨迹，也发出了电机控制信号。     

无陀螺卫星姿态的二阶插值非线性滤波估计

采用四元数作为姿态描述参数，提出了一种确定无陀螺卫星姿态的新方法，即二阶插值非线性姿态估计算法，它能够利用星敏感器提供的矢量观测信息准确地估计三轴稳定卫星的姿态。这种姿态估计算法的实现非常简单，其运算量与传统的扩展卡尔曼滤波姿态估计算法相当，但滤波性能却与基于二阶泰勒级数近似得到的非线性姿态估计算法一致。而且，在二阶插值非线性姿态估计算法中，不会遇到由四元数正交约束所造成的协方差阵奇异性问题。     

Improving regional ionospheric TEC mapping based on RBF interpolation

Radial basis function (RBF) interpolation with multi-quadric is developed to perform ionospheric total electron content (TEC) mapping for the Chinese region between 15°N ~ 40°N and 100°E ~ 125°E. TEC measurements from the Centre for Orbit Determination in Europe (CODE) covering the solar maximum year 2011 are used to investigate the performance of the proposed RBF interpolation method. The differences between the RBF interpolated TEC and the CODE TEC are within 0.5 TECU and the root mean square error (RMSE) is very small when 49 data points are used. The maximum difference is ~5 TECU and the error is less than 1 TECU with 25 samples. Our study suggests that a random distribution of measurement points gives smaller RMSEs than a homogenous distribution when the number of sample points is low. The study indicates that RBF interpolation offers a powerful and reliable tool for ionospheric TEC mapping.     

导弹轨控喷流气动干扰全空域插值方法研究

导弹侧向喷流气动干扰受海拔高度影响显著,主要原因在于雷诺数和压力比会随海拔高度的变化而变化。受大气参数的影响,雷诺数和压力比的变化规律并不一致。为能在现有气动模型基础上既保证插值精度又减少节点数,通过数值模拟方法研究了雷诺数和压力比对轨控喷流气动干扰的影响。结果表明:海拔高度对喷流气动干扰的影响主要由压力比变化造成,雷诺数变化产生的影响相对较小,且喷流干扰与压力比间存在一定的线性关系。因此,提出了一种基于压力比的喷流气动干扰插值方法。相比于传统的基于高度的插值方法,该方法可显著提高插值精度,并减少节点数,适用于全空域轨控喷流气动建模。     

基于欧拉方程的机翼设计方法及应用

以Takanashi提出的三维机翼设计理论为基础，研究与发展了一个基于欧方程和“正－反迭代、余量修正原理”的机翼设计方法。用改进的无限插值方法生成绕机翼的O－O贴体网格，采用三维欧拉方程作为充动分析计算的基本方程，该设计方法已用于某无人机机翼和一个超临界机翼设计，设计结果达到了预期的目标。     

Bifurcation in a 3-DOF Airfoil with Cubic Structural Nonlinearity

Limit cycle oscillations (LCOs) as well as nonlinear aeroelastic analysis of a 3-DOF aeroelastic airfoil motion with cubic restoring moments in the pitch degree of freedom are investigated.Aeroelastic equations of an airfoil with control surface in an incompressible potential flow are presented in the time domain.The harmonic balance (HB) method is utilized to calculate the LCO frequency and amplitude for the airfoil.Also the semi-analytical method has revealed the presence of stable and unstable limit cycles,along with stability reversal in the neighborhood of a Hopf bifurcation.The system response is determined by numerically integrating the governing equations using a standard Runge-Kutta algorithm and the obtained results are compared with the HB method.Also the results by the third order HB (HB3) method for control surface are consistent with the other numerical solution.Finally,by combining the numerical and the HB methods,types of bifurcation,be it supercritical,subcritical,or divergent flutter area are identified.     

光纤F-P腔传感器波分复用技术研究

描述了一种光纤F-P传感器的多路复用解调技术,该技术采用一个4通道的粗波分复用器（CWDM）和一个40通道的密集型波分复用器（DWDM）构成多路复用系统,利用探测器对系统输出光能量进行检测,通过插值法对采集信号进行拟合计算,解调出反射光谱的波长值,实现了4支具有相同参数的F-P腔传感器的同时解调。     

改进谢别德插值方法在地磁图构建中的应用

构建地磁图是地磁/惯性组合导航研究的一项重要内容,为了提高地磁导航中地磁基准图的精度,本文分析研究了改进谢别德插值算法,简要概述了数字地磁图的构建原则,并将改进谢别德插值算法应用到地磁图构建中.通过实验验证,发现该方法与距离加权反比插值算法、克里格插值算法相比,具有较好的插值效果.由此,初步判定改进谢别德插值算法在地磁...