立铣加工颤振稳定性时域求解与分析研究(英文)

In this paper, the instantaneous undeformed chip thickness is modeled to include the dynamic modulation caused by the tool vibration while the dynamic regenerative effects are taken into account. The numerical method is used to solve the differential equations goveming the dynamics of the milling system. Several chatter detection criteria are applied synthetically to the simulated signals and the stability diagram is obtained in time-domain. The simulation results in time-domain show a good agreement with the analytical prediction, which is validated by the cutting experiments. By simulating the chatter stability lobes in the time-domain and analyzing the influences of different spindle speeds on the vibration amplitudes of the tool under a Fixed chip-load condition, conclusions could be drawn as follows： In rough milling, higher machining efficiency can be achieved by selecting a spindle speed corresponding to the axial depth of cut in accordance with the simulated chatter stability lobes, and in Fmish milling, lower surface roughness can be achieved by selecting a spindle speed well beyond the resonant frequency of machining system.     

数控布带缠绕机关键技术

 多功能数控布带缠绕机是集机械、电子、气动、控制、软件和数控等技术一体化的多学科交叉综合应用的复杂设备。从提高参数控制精度及匹配精度的角度出发,详细地介绍了一种新型布带缠绕机的结构、组成及实现方式,并对机床本体、张力控制系统、温度控制系统、压力控制系统及数控系统的设计与开发中的关键技术做了较为深入的探讨。将该技术应用于多功能布带缠绕设备中,采用专用数控系统、先进机械装置及控制算法,既实现了缠绕成型过程的自动化,又保证了缠绕制品的质量,解决了复合材料零部件成型过程的关键制造技术难题。     

基于云蚁群算法的高效节能氩弧焊工艺参数优化研究

为在氩弧焊加工过程中提升效率的同时降低能耗,研究了一种氩弧焊高效节能工艺参数的多目标优化模型及算法。首先确定了以焊接速度及焊接电流为优化变量,在综合考虑焊接设备、工件特性、操作方法及焊接质量等约束的前提下,建立了以最小电能消耗以及最短加工时长为优化目标的多目标工艺参数优化模型;提出一种基于云模型的蚁群算法(CBACO)以对所构建的优化模型进行求解,其中包含一种适当的编码方式、一种局部与全局相结合的探索策略、一种基于云模型的变异因子、传统的单点交叉因子、单形交叉因子以及适当的选择策略;通过一个针对某航空器油箱的焊接实例,对所提出的优化模型及算法的实用性进行了验证,结果表明优化参数可在保证加工质量的前提下有效地节省时间60.41%~69.05%,节省电能34.88%~46.30%。     

相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

一起语音告警信号的故障研究

以某型飞机语音告警信号为例,分析了故障告警原理,找到了故障原因,为类似语音告警信号的排故提供参考。     

Standing window of oblique detonation with pathological behaviour

Standing of an Oblique Detonation Wave (ODW) on a wedge within combustor is the prerequisite of thrust generation for ODW engine which is regarded as a novel and conceptual propulsion device with hypersonic flight Mach number. Usually a standing window of ODW is defined as the wedge angle ranged from the ODW detached angle from wedge (upper limit) to the angle that a Chapman-Jouguet (CJ) detonation occurs (lower limit). For pathological detonation cases, however, the CJ detonation cannot be achieved, and thus the lower limit of the standing window of ODW should be revisited. In present study, two types of reactions in hypersonic incoming flow that include the behavior of pathological detonation, that is, the single-step irreversible reaction with mole variation and the two-step irreversible reactions with exothermic process followed by endothermic process, have been used for studying standing behavior of ODW. The steady detonation polar analysis of ODW is carried out for both reaction systems. The results reveal that the reaction with more mole decrement and the reactions with stronger endothermic process show the pathological detonation feature and therefore modify the lower limit of standing window of ODW. Three equivalent parameters are proposed to quantitatively measure the standing window range of ODW from points of view of thermodynamics, Mach number of incoming flow and heat effect of reactions. It is found that the standing window of ODW is determined by the specific heat ratio, the overdrive degree of detonation and the endothermic level of the hypersonic incoming flow, regardless of whether the detonation is pathological or not.     

Crustal deformation characteristics of Sichuan-Yunnan region in China on the constraint of multi-periods of GPS velocity fields

In order to obtain deformation parameters in each block of Sichuan-Yunnan Region (SYG) in China by stages and establish a dynamic model about the variation of the strain rate fields and the surface expansion in this area, we taken the Global Positioning System (GPS) sites velocity in the region as constrained condition and taken advantage of the block strain calculation model based on spherical surface. We also analyzed the deformation of the active blocks in the whole SYG before and after the Wenchuan earthquake, and analyzed the deformation of active blocks near the epicenter of the Wenchuan earthquake in detail. The results show that, (1) Under the effects of the carving from India plate and the crimping from the potential energy of Tibetan Plateau for a long time, there is a certain periodicity in crustal deformation in SYG. And the period change and the earthquake occurrence have a good agreement. (2) The differences in GPS velocity fields relative Eurasian reference frame shows that the Wenchuan earthquake and the Ya'an earthquake mainly affect the crustal movement in the central and southern part of SYG, and the average velocity difference is about 4–8?mm/a for the Wenchuan earthquake and 2–4?mm/a for the Ya'an earthquake. (3) For the Wenchuan earthquake, the average strain changed from 10 to 20 nanostrian/a before earthquake to 40–50 nanostrian/a after the earthquake, but before and after the Ya’an earthquake, the strain value increased from about 15 nanostrian/a to about 30 nanostrian/a. (4) The Wenchuan earthquake has changed the strain parameter of each active block more or less. Especially, the Longmen block and Chengdu block near the epicenter. The research provides fundamental material for the study of the dynamic mechanism of the push extrusion from the north-east of the India plate and the crimp from Qinghai Tibet Plateau, and it also provides support for the study of crustal stress variation and earthquake prediction in Sichuan Yunnan region.     

适用于参数可调结构的非定常气动力降阶建模方法

基于计算流体力学(CFD)的非定常气动力降阶模型(ROM)可以极大提高气动弹性分析效率,然而现有的ROM只能针对固定参数结构,即只适合于固定模态振型,这使得现有ROM在气动弹性优化设计和不确定性分析等结构变参问题中应用受限。针对该问题,在文献[20]基础上提出了一种新的适用于任意模态振型的非定常气动力建模方法。首先将待设计/分析的结构进行参数化抽样和模态分析,之后通过主成分分析(PCA)得到若干基振型,再将这些基振型线性叠加即可拟合抽样空间内任何参数下结构的前若干阶振型。当结构参数改动时,仅仅是叠加系数发生变化。算例表明,仅用很少的基振型就能达到理想的拟合精度。经典的气动力降阶方法可用于基振型坐标下的气动力降阶,进一步变换可得到适用于不同结构的ROM,这意味着,结构参数可以在抽样空间内任意调节改动,而ROM却是通用的。该方法能广泛用于气动弹性优化设计和不确定性分析工作,可提高颤振分析精度和效率。     

小型薄片零件高速铣削加工试验研究

针对小型薄片结构零件切削过程中的变形问题,以薄片"一"字电极高速铣削加工试验为例,从编程方式、切削参数选用、工序安排、走刀路线等方面展开研究。控制其变形量达到最小,以满足产品设计要求。     

飞行参数记录系统直流模拟量拉低原因分析

针对某架飞机飞行参数记录系统多个直流模拟参数拉低故障，对该型飞行参数记录系统直流模拟量采集转换原理进行分析，查找故障原因，制定相应的排故方法，并提出预防措施。