聚氨酯改性环氧树脂形状记忆材料

以甲基四氢邻苯二甲酸酐(METHPA)为固化剂,利用自制的聚氨酯预聚体(PU)改性环氧树脂(TDE-85)制备形状记忆聚合物。研究了形状记忆环氧树脂的力学性能、Tg和形状记忆性能。研究表明,形状记忆环氧树脂的韧性得到明显的提高,Tg得到了相应的下降,形状记忆性能良好,形状回复率皆在96%以上,形状固定率约达100%。     

SMA 智能复合构件控制裂纹的数值与试验研究

将ＴｉＮｉ形状记忆合金（ＳＭＡ）薄带复合于基体材料内部,利用形状记忆合金的特性,可以控制构件裂纹的扩展。本文介绍了智能复合构件控制裂纹的机理,并利用拟温度载荷法,直接应用现有有限元程序对控制裂纹的ＳＭＡ智能复合构件进行了计算与分析,同时还进行了激光云纹干涉法试验测试。计算和试验结果表明智能复合构件中的记忆合金薄带对构件裂纹有显著的控制效果,同时计算和试验结果的一致性也表明本文的分析方法是可行的。     

目标机动条件下的定点伴飞控制方法研究

对目标机动条件下的定点伴飞控制进行了研究。根据相对运动关系,建立适于伴飞模式的相对运动方程,将目标机动大小作为未知量加入相对运动方程,构建不确定系统。用LQR和Lyapunov法结合的方式设计相应定点伴飞控制律。理论证明了在目标机动时该控制律仍能实现系统的渐近稳定。仿真结果验证了该控制律的有效性。     

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.     

电推进卫星角动量卸载研究

电推进卫星需要在进行位置保持的同时通过将推力器的指向略微偏离质心来产生控制力矩,完成角动量卸载。针对该问题,文章在给定推力器开机位置、时长和动量轮目标卸载量的情况下,提出了正常模式和故障模式下的角动量卸载算法。通过对推力模型的简化,得出了推力器最优偏转方向的解析解,并对考虑推力器弧段损失和不考虑弧段损失的角动量卸载算法进行了比较。仿真结果表明,所提出的卸载算法能够在进行位置保持的同时完成角动量卸载,为电推进卫星的在轨控制策略提供了有效解决方案。     

大型客机后缘襟翼滑轨整流罩气动外形设计方法

大型客机后缘襟翼机构伸出机翼下表面会带来气动损失,必须设计相应整流罩。整流罩的外形尺寸对气动力影响较大,会直接影响飞机的气动特性。设计整流罩时应该遵循整流罩外形设计要求,使其引起的高速巡航阻力尽可能小。在查阅相关文献、对比研究大量整流罩图片、分析研究计算机辅助设计(CAD)中NURBS曲面曲线描述方法的基础上,建立了一套详细的大型客机后缘襟翼滑轨整流罩外形设计方法,该方法在满足整流罩包裹住机构、减小气动损失等基本要求的同时,缩短了整流罩设计周期。     

On the effect of considering more realistic particle shape and mass parameters in MMOD risk assessments

One of the primary mission risks tracked in the development of all spacecraft is that due to micro-meteoroids and orbital debris (MMOD). Both types of particles, especially those larger than 0.1 mm in diameter, contain sufficient kinetic energy due to their combined mass and velocities to cause serious damage to crew members and spacecraft. The process used to assess MMOD risk consists of three elements: environment, damage prediction, and damage tolerance. Orbital debris risk assessments for the Orion vehicle, as well as the Shuttle, Space Station and other satellites use ballistic limit equations (BLEs) that have been developed using high speed impact test data and results from numerical simulations that have used spherical projectiles. However, spheres are not expected to be a common shape for orbital debris; rather, orbital debris fragments might be better represented by other regular or irregular solids. In this paper we examine the general construction of NASA’s current orbital debris (OD) model, explore the potential variations in orbital debris mass and shape that are possible when using particle characteristic length to define particle size (instead of assuming spherical particles), and, considering specifically the Orion vehicle, perform an orbital debris risk sensitivity study taking into account variations in particle mass and shape as noted above. While the results of the work performed for this study are preliminary, they do show that continuing to use aluminum spheres in spacecraft risk assessments could result in an over-design of its MMOD protection systems. In such a case, the spacecraft could be heavier than needed, could cost more than needed, and could cost more to put into orbit than needed. The results obtained in this study also show the need to incorporate effects of mass and shape in mission risk assessment prior to first flight of any spacecraft as well as the need to continue to develop/refine BLEs so that they more accurately reflect the shape and material density variations inherent to the actual debris environment.     

High-precision shape approximation low-thrust trajectory optimization method satisfying bi-objective index

The shape approximation method has been proven to be rapid and practicable in resolving low-thrust trajectory; however, it still faces the challenges of large deviation from the optimal solution and inability to satisfy the specific flight time and fuel mass constraints. In this paper, a modified shape approximation low-thrust model is presented, and a novel constrained optimization algorithm is developed to solve this problem. The proposed method aims at settling the bi-objective optimization o...     

基于改进蚁群算法的飞机低空突防航路规划

蚁群算法是一种新型的基于群体的仿生算法。采用蚁群算法实现了飞机低空突防的航路规划,为航路规划问题提供了新的解决思路。并对原始蚁群算法进行了改进,提出了保留最优解、自适应选择策略和自适应信息素调整准则,有效地提高了算法的收敛速度和解的性能。最后用计算机进行了仿真,取得了较好的结果。