非合作无源探测中的假设检验弱目标检测方法

在非合作无源探测系统中,弱目标回波不仅会受到强直达波、强多径的干扰,还会受到强目标的掩盖干扰,因此很难对其进行有效检测。为了解决这一问题,提出了一种基于多择复合假设检验的弱目标检测方法。首先将接收信号投影到多径干扰的正交补子空间内,以消除强直达波和强多径干扰,然后将目标检测看作一个多择复合假设检验问题,建立了与之相应的基本框架模型,利用最大后验估计方法对目标时延、多普勒频移及信号幅度等参数进行估计,构造检验统计量,设置相应的门限,根据假设检验结果,逐个消除强目标干扰从而达到检测弱目标的目的。仿真结果表明,本方法可以有效抑制强直达波、强多径及强目标干扰,有效检测出弱目标,且虚警率低。     

Weibull分布参数估计值对细节疲劳额定强度的影响

将新材料、新工艺应用于民机结构设计时,细节疲劳额定强度（DFR）法仍是重要的评估方法。根据新型铝合金疲劳试验数据,全面分析了Weibull分布形状参数对DFR计算参数的影响;分析标准S-N曲线斜度参数对DFR的影响时,应考虑可靠性寿命的变化,采用低可靠度寿命计算曲线斜度参数可降低Weibull分布形状参数的影响;比较了采用不同分布参数估计值与传统上采用波音公司给定值进行DFR计算的差异。结果表明,对于通过符合性检验的试验数据,使用不同Weibull分布的参数估计值计算得到的DFR都大于按传统方法（用波音公司给定值）的计算结果,其中,三参数Weibull分布计算的DFR最大,至少增加10%以上。     

Relay selection based on MAP estimation for cooperative communication with outdated channel state information

In this paper, we consider an amplify-and-forward (AF) cooperative communication system when the channel state information (CSI) used in relay selection differs from that during data transmission, i.e., the CSI used in relay selection is outdated. The selected relay may not be actually the best for data transmission and the outage performance of the cooperative system will deteriorate. To improve its performance, we propose a relay selection strategy based on maximum a posteriori (MAP) estimation, where relay is selected based on predicted signal-to-noise ratio (SNR). To reduce the computation complexity, we approximate the a posteriori probability density of SNR and obtain a closed-form predicted SNR, and a relay selection strategy based on the approximate MAP estimation (RS-AMAP) is proposed. The simulation results show that this approximation leads to trivial performance loss from the perspective of outage probability. Compared with relay selection strategies given in the literature, the outage probability is reduced largely through RS-AMAP for medium-to-large transmitting powers and medium-to-high channel correlation coefficients.     

Particle flters for probability hypothesis density flter with the presence of unknown measurement noise covariance

In Bayesian multi-target fltering,knowledge of measurement noise variance is very important.Signifcant mismatches in noise parameters will result in biased estimates.In this paper,a new particle flter for a probability hypothesis density（PHD）flter handling unknown measurement noise variances is proposed.The approach is based on marginalizing the unknown parameters out of the posterior distribution by using variational Bayesian（VB）methods.Moreover,the sequential Monte Carlo method is used to approximate the posterior intensity considering non-linear and non-Gaussian conditions.Unlike other particle flters for this challenging class of PHD flters,the proposed method can adaptively learn the unknown and time-varying noise variances while fltering.Simulation results show that the proposed method improves estimation accuracy in terms of both the number of targets and their states.     

MIDACO on MINLP space applications

A numerical study on two challenging mixed-integer non-linear programming (MINLP) space applications and their optimization with MIDACO, a recently developed general purpose optimization software, is presented. These applications are the optimal control of the ascent of a multiple-stage space launch vehicle and the space mission trajectory design from Earth to Jupiter using multiple gravity assists. Additionally, an NLP aerospace application, the optimal control of an F8 aircraft manoeuvre, is discussed and solved. In order to enhance the optimization performance of MIDACO a hybridization technique, coupling MIDACO with an SQP algorithm, is presented for two of these three applications. The numerical results show, that the applications can be solved to their best known solution (or even new best solution) in a reasonable time by the considered approach. Since using the concept of MINLP is still a novelty in the field of (aero)space engineering, the demonstrated capabilities are seen as very promising.     

一种基于压缩感知的信道估计算法

信道估计是无线通信系统的关键技术之一。文章提出一种基于压缩感知（Compressed Sensing）的信道估计方法,这种方法通过分析信道时延和多普勒域的稀疏度,可以有效降低导频的数量,从而提高系统的频谱利用率。通过与最小均方（Least Square,LS）信道估计方法的对比,可以明显看到导频数量的降低。     

一种未知信源数的快速DOA估计算法

文章针对众多性能优良的超分辨DOA（Direction—Of-Arrival）估计算法大都是以预知信源数为前提、信源数估计不准可能会导致DOA估计失败这一问题,提出了一种基于协方差矩阵对角加载的超分辨DOA估计算法。该算法不需要预判信源个数和进行特征值分解,且通过对协方差矩阵进行对角加载,可以平滑小快拍数时噪声特征值分散程度,因此,该算法更适用于快拍数较少的情况。理论分析表明：该算法的统计估计性能接近于MUSIC（Multiple Signal Classification）算法。计算机仿真结果验证了该算法的鲁棒性和可行性。     

半虚拟现实座舱中基于最大后验概率框架的手姿态估计

手姿态估计是半虚拟现实(SVR)座舱环境中进行人机交互(HCI)的基础工作,为此提出一种基于最大后验概率(MAP)框架的手姿态估计方法.针对手部自遮挡问题,建立多视点手势特征树,通过树节点搜索实现手姿态参数的快速估计,并利用时序信息提高估计精度.在树节点搜索过程中,采用改进的局部敏感哈希(LSH)索引算法提高搜索效率....     

多操纵面飞翼构型飞机舵面故障在线诊断方法

舵面故障会影响飞机的操纵性,为实现飞机的控制重构需在线诊断出舵面的故障信息.针对多操纵面飞翼构型飞机,提出了一种在线诊断其舵面故障的方法.飞翼构型飞机舵面故障在线诊断需辨识的操纵导数个数较多,直接使用最小二乘法难以精确辨识得到各操纵导数.基于限定记忆最小二乘法,采用分组辨识法对飞机的操纵导数进行辨识,减少了每次辨识操纵...     

基于验后概率的Bayesian序贯方差检验技术（I）

对于正态分布参数的检验,包括期望μ与方差σ2,是航空航天装备可靠性与精度分析工程中比较关心的问题。尤其是对方差的检验,是装备试验与评价分析的一项非常重要的内容。论文基于验后概率和“小概率事件原理”,对复杂假设条件下,σ2的Bayesian序贯检验,提出了基于Bayesian验后概率的序贯方差检验的基本假设,建立了BSVT模型,设计了临界值的求解算法,并对“强制”截尾条件下的假设检验判决准则进行了论述。最后,结合实例对BSVT的求解与应用进行了说明。