噪声调幅干扰信号波达方向估计研究

利用噪声调幅干扰信号频谱结构的特殊性,提出基于阵列接收信号载频处频域数据的波达方向估计算法,通过仿真分析表明该算法的角度估计性能明显高于目前广泛采用的比幅比相单脉冲测角法,并且计算量也大大低于传统的波达方向估计算法.     

基于距离像特征的复合速度估计算法研究

首先分析了步进频率宽带信号混频处理原理和目标速度对距离像的影响。在此基础上,提出了基于距离像熵和距离像对比度的速度估计算法,详细分析了这两种算法的数学原理、步骤、效果、适用条件等。最后,基于这两种算法又提出了复合速度估计算法,大大提高了速度估计精度。     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

未知空间目标纹理缺失表面三维重建算法

针对传统三维重建方法难以对纹理缺失表面进行完整重建的问题,提出一种基于深度学习与截断符号距离函数(TSDF)融合的未知目标三维表面完整重建算法。首先设计一种基于深度学习的图像逐像素深度估计框架,通过在训练过程中引入多个复杂结构模型,提高该深度估计框架的泛化能力;其次,利用TSDF对各帧图像所估计的深度信息进行融合,实现对纹理缺失区域的空间目标完整三维重建。根据仿真校验,对于300 mm尺寸的卫星模型图像,像素深度估计平均误差约为13 mm,通过TSDF融合后尺寸精度误差小于5.10%。实验结果表明该算法可以对未知空间目标光学图像进行逐像素深度估计,并获得目标完整的三维结构与纹理信息,有效解决无纹理区域的重建结构缺失问题。     

小波去除噪音算法研究

介绍了小波变换滤除噪音的机理和与傅立叶变换相比的优越性,其中包括确定性噪音和随机噪音。讨论了增强去噪效果的几种改进方案并提出一种试验估计去噪方法,对工程应用有一定的实用价值。     

Vision-based pose estimation for cooperative space objects

Imaging sensors are widely used in aerospace recently. In this paper, a vision-based approach for estimating the pose of cooperative space objects is proposed. We learn generative model for each space object based on homeomorphic manifold analysis. Conceptual manifold is used to represent pose variation of captured images of the object in visual space, and nonlinear functions mapping between conceptual manifold representation and visual inputs are learned. Given such learned model, we estimate the pose of a new image by minimizing a reconstruction error via a traversal procedure along the conceptual manifold. Experimental results on the simulated image dataset show that our approach is effective for 1D and 2D pose estimation.     

Multiple-site investigation of the properties of an HF radio channel and the ionosphere using Digital Radio Mondiale broadcasting

The Digital Radio Mondiale (DRM), one of the new digital radio broadcasting standards, has been designed to overcome typical short wave radio channel difficulties, such as the multipath propagation and fast temporal changes of the received signal level, both related to the properties of the ionosphere along the path of propagation. In particular, some of the RF carriers used in the applied COFDM transmission technique serve to estimate the current state of the radio channel to enable the proper demodulation of the received signal.We have been detecting such RF carriers on select frequency channels (standard DRM broadcast) using a network of recording stations located in different parts of Poland in order to collect data on the HF radio channel. We have been also evaluating the usefulness of this procedure in providing information on the current state of the ionosphere in the refraction region between the transmitter and receivers. When the DRM system becomes more widespread, this method can supplement data that comes from the ionosondes, since it does not require much financial resources and the receivers can be easily scattered over a large area. This paper presents a set of experimental data and its analysis.     

ATM局域网仿真技术

简要介绍了 Ａ Ｔ Ｍ 局域网仿真的主要原理，以 Ｉ Ｂ Ｍ ８２６０ Ａ Ｔ Ｍ 交换机为例，具体分析了 Ａ Ｔ Ｍ 局域网仿真的实现细节。     

航天型号项目成本估算方法研究与实现

介绍了国内外航天型号研制项目成本估算的研究现状,分析了航天型号研制项目成本估算的作用与特点。研究了参数成本估算法、工程成本估算法、类比成本估算法、外推成本估算法、仿真模型法和综合成本估算法等方法。给出了用综合成本估算法估算的风云四号气象卫星研制成本算例。     

卫星通信地面终端射频一致性测试及仿真分析

介绍了卫星通信系统体制、地面终端的基带处理过程,以及发射机射频指标和测试算法,利用MATLAB和ADS软件搭建了基带信号生成模块、发射机模块,对终端发射机的发射功率、误差矢量幅度、占用带宽、邻道干扰进行了仿真。仿真结果表明,上变频器的射频带宽过小会使调制信号的误差矢量幅度增大,放大器工作在非线性区会对占用带宽和邻道干扰有较大影响,使发射机不满足射频一致性要求。本文的研究结果对设计卫星通信地面终端具有一定的借鉴意义。