Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

求解涡扇发动机数学模型的有限域搜索方法

提出一种基于N-R迭代方法的有限域优化搜索法,用于求解涡扇发动机数学模型。该方法不仅具有N-R优化迭代求解特色,还具有将初猜解附近划定域进行泛搜能力,使迭代运算具有强收敛性和平稳性。该方法所定义的迭代因子可通过编程自动调整,进而可以确定最小迭代次数及此意义下的最优迭代因子。      

含多裂纹连接结构损伤容限试验研究

 针对机翼典型对接结构,进行了平板空孔试样和螺栓搭接件在等幅谱及飞－续－飞谱下的多裂纹损伤容限试验,通过该试验开展多裂纹开裂模式及多裂纹扩展规律的试验研究,为多裂纹断裂力学理论分析、多裂纹结构剩余强度准则提供试验依据。     

不饱和聚酯树脂与双马来酰亚胺的共聚改性

利用双马来酰亚胺(BMI)作为共聚单体与不饱和聚酯(UP)树脂进行共聚反应,使其玻璃化转变温度、弹性储能模量、拉伸和弯曲性能都有大幅度的提高,尤其是70?℃下力学性能有明显改观.利用红外光谱法测定了上述共聚树脂体系中不饱和聚酯、苯乙烯、双马来酰亚胺各自双键的聚合反应程度,分别为70.83%,95.46%和97.69%.实验结果表明由于BMI的参与,大大提高了UP树脂的固化反应活性.试样的断口形貌表明上述共聚树脂呈均相组织结构.     

S-08钢真空熔模精密铸造工艺研究

通过工艺试验和系统分析,研究出一套用真空感应铸造炉生产S-08钢铸件的工艺方法,解决S—08钢真空熔模精密铸造过程中的关键工艺技术问题,使S-08钢铸造的液氧／煤油发动机低压壳体、氧主阀下壳体等关键铸件满足高压、高冲击的负荷指标。     

高速进气道抛罩过程内流场演化特性研究

为探究进气道整流罩打开过程中内流场的演化规律,针对下颌式进气道及其配套整流罩,基于重叠网格法求解N-S方程,详细分析了抛罩过程中内流场演化过程与特征流场结构。研究表明,堵罩时,整流罩前端发展出V形激波,整流罩尾部形成后向台阶且产生一对涡矢量方向相反的流向涡,开罩过程中,整流罩前端的V形激波与尾部的后向台阶均会对内流场流动产生影响,捕获流量在中间某时刻达到峰值且大于稳定状态。对于开罩过程流动准定常且内流道无大分离区的流场,进气道在V形激波打在唇口时完成起动且整流罩在此后不影响内流场流动。假设的匀加速转动与重构出的真实转动吻合较好,对于更精确的运动过程模拟可采用三次函数的角速度变化律。     

Structural and collisional data for Mg III and Al IV

We present in this work energy levels, oscillator strengths, radiative decay rates and fine structure collision strengths for the Mg III and Al IV ions. The 11 configurations: (1s²) 2s²2p⁶, 2s²2p⁵3l, 2s2p⁶3l, 2s²2p⁵4l   (l?n-1$l?n-1$, where n is the principal quantum number), yielding the lowest 75 levels are used. The collisional data for these two ions are missing in the literature, especially the database CHIANTI, this is the principal motivation behind the present work. Calculations have been performed using the AUTOSTRUCTURE code. AUTOSTRUCTURE treats the scattering problem in the distorted wave approach. Fine structure collision strengths are calculated for a range of electron energies from 10 Ry to 240 Ry. The atomic structure data are compared to available experimental and theoretical results.     

基于星间激光测距的三星时差定位系统标校方法

利用精确的星间激光测距信息,提出了基于星间测距的三星时差定位系统标校方法。该方法消除了副星相对位置系统误差对定位精度的影响,同时提出了副星相对位置系统误差的解析解法,建立了模型误差和对副星相对位置系统误差进行估算的误差的定量关系,并证实了基于星间激光测距的标校方法可以在较大范围内提高定位精度。     

一种基于模式匹配法的波纹馈源快速分析方法

波纹馈源广泛应用于星载反射面天线系统.文章基于模式匹配法对圆波导阶梯和波纹馈源进行了分析,对波导阶梯的散射参数和波纹馈源的辐射方向图进行了计算,分析波纹馈源时采用光壁波导中的TE和TM模式,并通过分别与Ansoft HFSS仿真结果和试验测试数据比较验证了方法的准确性.采用Ansoft HFSS软件分析某馈源计算时间为...     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.