相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

Aeroelastic simulation of the first 1.5-stage aeroengine fan at rotating stall

A massive parallel aeroelastic simulation platform has been built to investigate the first 1.5-stage fan of an aeroengine at rotating stall. The Computational Fluid Dynamics (CFD) solver and Computational Structural Dynamics (CSD) solver are coupled directly by non-matching mesh interfaces. The unsteady rotor/stator interaction is solved by the Sliding Mesh Interface method. The original rotor blades are shrouded by the midspan shrouds. An unshrouded fan is also created to investigate the effects of the midspan shrouds. Both the shrouded fan and unshrouded fan have stable aeroelasticity at the designed state. At rotating stall, the stalled region rotates at 30% of the rotor speed on the absolute reference frame. The energy spectrum of the rotating stalled flow is measured quantitatively. It shows that the first two order excitations are much stronger than the higher order excitations. In the flow of rotating stall, the fifth backward travelling wave mode of shrouded fan is resonated by the fifth excitation of the rotational stalled flow because the rotational speed of the stalled region coincides with the modal rotational speed, while for the unshrouded fan, the first bending mode is resonated by the second excitation of the rotational stalled flow, forming two waves in the circumference of the annulus blades. At rotating stall, the vibration of the shrouded blades is still under control but the vibration of the unshrouded blades is diverged and out of control. A novel tool, i.e., resonance map, is proposed to predict the resonance. It provides a perspective to explain the effects of midspan shrouds at a theoretical level, and it would also be helpful in the structural design of blades.     

Solitary and periodic waves in magneto–rotating plasmas: Effect of the Kappa–Cairns distributed electrons

The nonlinear propagation of ion–acoustic (IA) waves in a magneto–rotating plasma is studied by considering the Kappa-Cairns electron distribution. Employing the perturbation scheme, Korteweg–de Vries equation is derived. It is seen that both positive and negative potential solitons can be supported in the present plasma model. The numerical results reveal that the Kappa-Cairns distributed electrons modify features of the electrostatic waves significantly. The effects of non–thermal parameters, plasma rotation frequency, ion temperature, and the wave propagation angle on electrostatic solitary wave structures are also discussed here. It is found that the plasma parameters considerably influence the propagation of IA waves in rotating plasmas. Furthermore, using the bifurcation theory of planar dynamical systems to the K-dV equation, we have presented the existence of solitary and periodic traveling waves. Our study may be helpful to understand the behavior of ion–acoustic wave in the rotating plasma.     

Receptivity and structural sensitivity study of the wide vaneless diffuser flow with adjoint method

The stability of the flow in the vaneless diffuser of a centrifugal compressor is studied with the linear theory. The characteristics of direct and adjoint perturbation modes are investigated, and the receptivity of the instability mode to momentum forcing or mass injection is identified based on the adjoint modes. Analysis shows that the perturbation with the largest amplitude is located at the outlet of the vaneless diffuser, while the highest-receptivity region is located in the middle of the vaneless diffuser along the radial direction. The large difference between the direct and adjoint modes indicates that the instability mechanism cannot be identified from a study of either eigenmode separately. Therefore, the structural sensitivity analysis is adopted to study the feedback of the instability mode. The structural sensitivity of the eigenvalue which is proportional to the perturbation pressure and velocity is used to explain the mechanism of flow control for the vaneless diffuser.     

Development of secondary flow field under rotating condition in a straight channel with square cross-section

The developing secondary flow fields in the entrance section of a rotating straight channel were experimentally investigated using Particle Image Velocimetry (PIV). The effects of streamwise position, Reynolds number and rotation number on the development of the secondary flow fields were revealed. The results show that the absolute values of vorticity flux of the trailing side roll cells increase with increasing radius of the measured plane and rotation number. When the absolute value of vorticity flux exceeds a critical value, the merging of the trailing side roll cells appears. Moreover, when the number of the trailing side vortex pairs is even, the absolute values of vorticity flux of the leading side vortices increase along streamwise direction. Otherwise, the absolute values decrease along the streamwise direction. By the circulation analysis, this phenomenon was found to have relationship with the merging of the trailing side roll cells, and further concluded that the secondary flow field in a rotating channel has to be treated as a whole. At last, the increase of the Reynolds number was found to be able to induce the merging position moves upstream.     

Oblique sounding of the ionosphere by powerful wave beams

The article is devoted to modeling the impact on the ionosphere powerful obliquely incident wave beam. The basis of this analysis will be orbital variational principle for the intense wave beams-generalization of Fermat’s principle to the case of a nonlinear medium (, ,  and ). Under the influence of a powerful wave beam appears manageable the additional stratification of the ionospheric layer F2. Explicit expressions show how the properties of the test beam, with a shifted frequency, released in the same direction as the beam depend on the intensity of a powerful beam and the frequency shift.     

复材C梁角度偏差对装配静强度影响的建模仿真研究

针对含有角度偏差的复合材料C形梁的典型装配结构,建立了一种研究其角度偏差对装配结构的静载强度影响的有限元模型,设计了含有角度偏差的典型结构的单拉试验以获得最大静载强度的试验数据.在有限元软件ABAQUS中建立了仿真模型,采用基于应变描述的三维Hashin准则预测材料的失效,编写用户材料子程序(UMAT)仿真单拉过程.与试验结果对比验证了模型有效性,为进一步分析复合材料C形梁的角度偏差对其典型装配结构的静载强度影响规律提供了理论基础.     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

Ni作中间层的QCr0.8与1Cr21Ni5Ti电子束焊接

针对QCr0.8与1Cr21Ni.5Ti异种合金进行了电子束焊接技术研究.与无中间过渡层形成的焊缝相比,以Ni作为中间过渡层的QCr0.8/1Cr21 Ni5Ti的电子束焊接接头,焊缝区形成了组织、成分梯度变化的过渡区,为提高QCr0.8/1Cr21Ni5Ti电子束焊接接头的力学性能提供了良好的组织保证.     

带盖板预旋系统的流动实验

通过低转速的模拟实验对涡轮盘腔的带盖板预旋系统的流动特性进行了研究。在不同的紊流参数（0.5〈λT〈0.96）和旋转比（1.03〈βp〈1.9）下测量了预旋腔和盖板腔内的压力与速度分布,得到了两个腔内的旋转比变化情况,并分析了旋转雷诺数和进出口压比对预旋喷嘴流量系数的影响。实验结果表明：在两个腔内离心升压效应明显,预旋喷嘴出口气流对预旋腔内的气流压力和速度的影响要远大于接收孔出口气流对盖板腔的影响,压比和旋转雷诺数对喷嘴流量系数有较小的影响。