航天飞行中的稀薄气体动力学

飞船、宇航探测器、航天飞机等复杂外形航天器给气体动力学，包括稀薄气体动力学提出了新的要求。本文简要介绍了为计算过渡领域中气动力与热而发展的基于位置元概念的DSMC方法的通用算法。该方法解决了计算物面通量量的技术难点并已用于模拟圆球、飞船、类航天飞机的绕流。正在进行的航天实践，如麦哲伦飞船对金星的探测、行星大气中的气动制动、伽利略飞船的木星之行、尾屏蔽在太空中获得高真空的实验等等提出了新的气动力问题，稀薄气体动力学和DSMC方法是有力的工具。     

三维有限元网格的自动划分

本文作者从研究结构的数学模型入手,讨论了建立三维结构有限元计算模型的方法。成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。     

谐波传动共轭齿廓的运动学仿真研究

根据包络理论，通过建立谐波齿轮传动共轭齿廓分析的通用数学模型，在已知柔轮齿廓的条件下可求得与之共轭的刚轮理论齿廓的离散点，通过最小二乘拟合的方法求得刚轮的工作齿廓，并通过啮合区段干涉检验法来校验齿廓的重叠干涉，最后通过计算机程序对所求的刚、柔轮工作齿廓进行运动学仿真以验证所求工作齿廓的合理性，还通过实例对程序进行了验证。本文的方法为探索谐波齿轮用新型工作齿廓提供一条可行的途径，并使小速比谐波齿轮传动变得可行。     

CARDC 2.4m引射式跨声速风洞设计与运行调试

中国空气动力研究与发展中心研制了可更换喷嘴的中压气体引射器 ,利用现有中压气源驱动 ,建成一座增压回流引射式跨声速风洞。试验段截面尺寸 2 .4m×2 .4m ,M =0 .3～ 1 .2。稳定段最高工作压力为 0 .45MPa ,最高模型试验雷诺数Rec=1 5× 1 0 6(M =0 .90 ,C =0 .2 4m) ,稳定吹风时间≥ 1 5s。风洞气动回路上分别配置有多喷管引射器、栅指扩散段、跨声速试验段驻室抽气系统及特殊的主排气系统等装置。采用智能自适应解耦控制技术 ,实现总压和M数独立、快速、精确地控制。该气动布局与部段配置及其功能设计 ,在国内跨声速风洞中均是首次采用。     

考虑高载和阻尼介质时刚塑性圆板的塑性动力分析

本文研究了阻尼介质对刚塑性圆板在高载(冲击荷载)作用下塑性动力响应的影响,得到了解析解并对此解进行了讨论。当阻尼介质参数趋于零时,本文结果与无阻尼解一致。文中还画出了荷载与阻尼介质对圆板运动时间和板中心点残余挠度的影响曲线。     

GPS定时校频应用技术的基础研究

针对利用GPS进行定时校频技术开展了一系列的应用基础研究,包括GPS定时校频的方法及其不确定度、定时校频数据的处理等。在给出实验结果的同时,对影响GPS定时精度的各种因素(包括SA影响)进行了讨论;同时对提高GPS定时精度的途径作了初步探讨。     

基于多体分析的对接机构结构锁动力学仿真研究

分析了周边式空间对接机构结构锁的执行机构的特点，以及运用现有动力学分析软件解决此问题的困难；继而采用多体动力学建模方法，建立了结构锁执行机构的动力学模型，并针对本模型的特殊性采用了变步长的广义坐标分块求解算法；最后通过求解模型得到了机构的动力学特性曲线，证明了滚珠丝杆和弹簧复合机构作为结构锁执行部件是可行的．     

A survey of radio jets with Chandra and HST

Relativistic jets are a common property of radio-loud Active Galactic Nuclei (AGN). Understanding jet physical properties is an essential precursor to understanding the mechanisms of energy transport, and ultimately, how energy is extracted from the central black hole. In this paper, I highlight recent developments from Chandra and HST observations of kpc-scale jets in AGN, with particular emphasis on our survey of 17 radio jets in a sample of FRII radio galaxies. These observations show that (1) X-ray and optical emission is common from kpc-scale jets, (2) a large fraction of the bolometric luminosity is emitted at X-rays, and (3) in most sources, a candidate emission process for the X-rays is inverse Compton scattering of the Cosmic Microwave Background off the relativistic electrons in the jet. If the latter scenario holds, the implication is that jets are still relativistic on kpc scales.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

DME脉冲调制信号波形参数对空间频谱占用的影响分析

航空测距器DME的开发、调试和性能验证都要用到高斯双脉冲调制格式的DME信号。由于专用的DME信号模拟器技术复杂、价格昂贵,人们常用具有快沿双脉冲调制功能的模拟信号源替代。本文以航空测距器DME信号要求为依据,初步分析了这种替代可能存在的问题,并通过实验对不同边沿条件下高斯双脉冲、矩形双脉冲调制信号的功率频谱占用情况进行了验证。