Wireless sensor networks for planetary exploration: Experimental assessment of communication and deployment

Planetary surface exploration is an appealing application of wireless sensor networks that has been investigated in recent years by the space community, including the European Space Agency. The idea is to deploy a number of self-organizing sensor nodes forming a wireless networked architecture to provide a distributed instrument for the study and exploration of a planetary body. To explore this concept, ESA has funded the research project RF Wireless for Planetary Exploration (RF-WIPE), carried out by GMV, SUPSI and UPM. The purpose of RF-WIPE was to simulate and prototype a wireless sensor network in order to assess the potential and limitations of the technology for the purposes of planetary exploration.     

高阶带谐摄动下卫星相对运动精确动力学模型

在考虑J 2 项摄动的卫星相对运动精确动力学模型基础上,推导了可以精确到任意阶带谐非球形引力摄动的卫星相对运动精确动力学模型,还给出了一组简洁的基于参考卫星轨道要素（Reference Satellite Variables）的微分方程,能够描述精确到任意阶带谐非球形引力的卫星地球轨道运动。由于在模型推导过程中没有引入任何简化,新推导的结果适用于任意偏心率的地球轨道。     

改进高斯混合粒子滤波的纯方位目标跟踪算法

针对纯方位跟踪系统非线性较强、传统跟踪滤波方法收敛速度慢且容易发散的问题,提出了一种基于改进高斯混合粒子滤波的纯方位跟踪算法。该算法基于Sigma点卡尔曼滤波(SPKF)和粒子滤波的特点,用有限的高斯混合模型来近似后验状态密度、系统噪声和观测噪声的分布。利用贪心EM算法实现模型的降阶,一定程度上克服了EM算法假定混合成分数为已知、迭代的结果需要依赖初始值、可能收敛到局部最大点和可能收敛到参数空间的边界的缺点,从而改善粒子枯竭的问题。仿真实验结果表明在纯方位跟踪领域,与传统粒子滤波(PF)和基于EM的高斯混合粒子滤波相比,该算法在保持高精度估计能力的同时,具有较强的鲁棒性,是解决非线性系统状态估计问题的一种有效方法。     

改进的卫星广播星历参数模型及其算法

考虑导航卫星受地球周期性的摄动力影响,提出了一种改进的导航卫星星历参数模型,给出了模型参数的计算方法和用该模型外推卫星轨道的计算步骤。仿真计算结果表明：该广播星历参数模型外推能力强,可较好地拟合卫星运动轨道。     

An alternative computation of a gravity field model from GOCE

GOCE is the first satellite with a gravitational gradiometer (SGG). This allows to determine a gravity field model with high spatial resolution and high accuracy. Four of the six independent components of the gravitational gradient tensors (GGT) are measured with high accuracy in the so-called measurement band (MB) from 5 to 100 mHz by the GOCE gradiometer. Based on more than 1 year of GOCE measurements, two gravity field models have been derived. Here, we introduce a strategy for spherical harmonic analysis (SHA) from GOCE measurements, with a bandpass filter applied to the SGG data, combined with orbit analysis based on the integral equation approach, and additional constraints (or stabilization) in the polar areas where no observation is available due to the orbit geometry. In addition, we combined the GOCE SGG part with a set of GRACE normal equations. This improves the accuracy of the gravity field in the long-wavelength parts, due to the complementarity of GOCE and GRACE. Comparison with other models and with external data shows that our results are rather close to the GPS-levelling data in well-selected test regions, with an uncertainty of 4–7 cm, for truncation at degree 200.     

基于动态框搜索的星图中星点获取算法研究

分析星图中星点获取算法的具体流程,针对传统星体目标聚类方法的不足,提出了动态框搜索算法。首先采用固定像素框搜索区域最大灰度值点,然后以该点为中心,结合星图图像中真实星点的分布情况,采用大小可变的像素框进行星体目标聚类,最后采用加权质心法得到星点的中心位置。仿真实验表明,该算法能达到良好的效果。     

船岸网络时延测量误差原因分析

简单介绍了测量船船岸通信网络组成,重点介绍了NTP（网络时间协议）和PTP（精密时间协议）这2种网络时间同步协议。针对改建后的船岸网络时延测量误差进行分析和研究,提出基于TWSTFT（卫星双向时间频率传输）技术模型的网络时延测量方法,测量结果误差小于3ms,满足测控任务实时性要求,为提高测控网的测控精度提供有益参考。     

直升机旋翼转速指示异常故障简析

旋翼转速指示异常是直升机较为常见的故障,本文针对两起较为典型的旋翼转速指示异常故障,从系统原理、故障现象、排除方法等多个方面进行分析并列出故障树,为后续装备保障提供参考。     

动态拖尾星图模拟算法研究

星图模拟技术是星图识别算法仿真和性能测试的基础.为了更好地模拟星敏感器在轨工作的情况,对星敏感器的软件开发以及自身性能进行有效的地面测试,提出一种动态拖尾星图模拟算法.该算法分为4个步骤:首先根据星敏感器指向在全天球范围内搜索导航星;接着利用小孔成像模型计算导航星在星敏感器成像面的投影位置;然后在考虑卫星运动引起的恒星拖尾的基础上,按照二维灰度分布规律置灰度值来模拟星像点像素;最后叠加杂散光背景及成像器件引起的噪声.提出的算法具有速度快、精度高及可实现性高等优点.     

一种高精度星敏感器用遮光罩

分析星敏感器在轨所受到的杂光的特点,对星敏感器常用的遮光罩结构进行分析和对比说明.给出一种结构简单、体积和重量较小的一级遮光罩,使用TracePro对其杂光抑制性能进行分析,给出其PST曲线及30°太阳入射角时的杂光在像面上的照度分布图.对该遮光罩进行了杂光实验,给出像面上A、B、C三区的杂光均值随太阳入射角的变化曲线.仿真分析结果与实验结果表明该遮光罩杂光抑制能力较好,可以满足星敏感器的杂光抑制要求.