激光微推进器用于微小卫星的姿轨控仿真

为研究激光微推进器用于微小卫星在轨空间飞行任务的可行性,利用已建立的激光推进微小卫星仿真平台,对微小卫星在轨姿态调整、轨道维持和轨道转移等飞行任务进行了仿真和分析。仿真结果表明,星载激光微推进器可满足在轨微小卫星的高控制精度姿态调整、近地观测轨道维持以及较长时间要求的轨道转移等空间任务对推进系统的要求。     

防静电白色热控涂层的耐空间环境及工艺性能

研究了防静电白色热控涂层（ACR-1）的耐空间环境性能及工艺性能。在模拟空间环境设施中研究了紫外辐照、电子辐照和质子辐照对涂层太阳吸收率（αs）的影响。结果表明ACR-1在地球静止轨道环境中具有较高的稳定性；经过3000当量太阳小时（ESH）的紫外光辐照后，△αs为0．02；质子辐照效应对涂层仅。的变化影响较大。另外，研究了涂层厚度对αs和其与基材结合力的影响，以及基材表面处理工艺对涂层在-196—150℃冷热交变循环试验中可靠性的影响。     

金属板料单向拉伸引伸计及测试系统的研制

利用电阻应变式传感器的原理，研制了单向引伸计及测试系统，对金属薄料的成形性能参数应变刚指数n和厚向异性指数r进行检测，并成功地用于科研和教学活动中，在材料检测研究方面颇具价值。     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．     

卫星优化热设计方法

试图把最优化技术应用于卫星工程的热设计中,提出一种优化热设计的方法,并以14个节点模型作为实例进行了计算分析,采用Hooke-Jeeves 的直接搜索法得到了满意的结果。初步编制的计算机程序,可作为卫星热设计方案计算的基础。     

卫星通信的产业化

回顾了中国发展卫星通信的简要历史，介绍了中国卫星通信的现状和作用。在调查国内用户需求的基础上，预测了１９８８－２００２年国内用户对卫星通信转发器需要的数量。     

微结构谐振传感器

阐述了频率输出的新型谐振传感器的发展方向之一——微型化。评价性地论述了热激励硅谐振压力传感器和热激励谐振膜质量流量传感器。重点讨论了热激励的原理,特点等。指出我国应对传感器的这一发展趋势给予足够的重视。     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

Study of GNSS-measured ionospheric total electron content variations generated by powerful HF-heating

The purpose of this work is to report the experimental evidences for the influence of perturbations in the electron density in the dayside mid-latitude ionosphere, that are caused by high-frequency heating of the F2 layer, on the GNSS signals. The experiments were carried out at the Sura heater (Radio Physical Research Institute, N. Novgorod). During the sessions of ionospheric heating with different time modulations of the radiated power the rays linking the navigational satellites with the ground receiver intersected the heated region. Variations in the total electron content (TEC) were studied; these variations are proportional to the reduced phases of navigational signals. It is shown that with the square-wave modulation of the radiated power (with periods of 1, 6, 10 and 15 min), perturbations with periods of the main modulation of heating and its harmonics appear in the spectrum of TEC variations. Examples are presented of identification of the heating-induced variations in TEC, including determination of the amplitudes and time characteristics of these variations.     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.