中分辨率成像光谱仪焦平面设计方案设想

文中就中分辨率成像光谱仪的焦平面设计进行了分析,根据中分辨率成像光谱仪的谱段配置、微型组合滤光片研制难度、辐照分辨率、空间分辨率等具体情况,提出了详细的焦平面设想:在可见光波段焦平面(VIS FPA)采用镶嵌蓝光增强PIN二极管列阵,近红外焦平面(NIR FPA)采用红外增强PIN二极管列阵,读出采用CMOS多路读出及源跟随器输出结构,以相关双取样电路消除背景噪声、复位噪声和热噪声,每列探测器对应一路前置放大器;短波红外焦平面(SWIR FPA),探测器采用光伏HgCdTe器件,采用直接注入多路读出电路;长波红外焦平面(LWIR FPA),探测器采用光导HgCdTe器件,读出电路为与光敏元一一对应的前置放大器,主放大器,然后以模拟开关变为串行输出,文中还就各FPA的信噪比、量子效率、串音等进行了分析,提出了各焦平面的最佳工作温度、响应率和一致性等要求。     

商业成像情报卫星的现状和发展趋势

分析了商业成像情报卫星的现状及其特点，展望了商业成像情报卫星技术的发展趋势。指出，商业成像卫星以其应用范围广泛、商业价值巨大而得到了美、俄等国的高度重视，并在技术上得到迅速发展；商业成像情报卫星突破或淡化了军用与民用的界限，实现了两者的信息共存、资源共享、综合利用；未来商业成像情报卫星将朝着小型化、一体化、数字化、可见光成像与微波成像的方向发展。     

FY—1C极轨气象卫星的进展

在概述美国和俄罗斯等国外极轨气象卫星发展概况的基础上，介绍了中国极轨与静止轨道两种气象卫星的业务应用卫星体系，重点介绍了“风云一号”（02星）即FY－1C极轨气象卫星的任务、总体设计、技术特点、关键技术以及所取得的进展。最后简述了新一代有轨气象卫星FY－3的发展设想。     

红外多光谱扫描仪主体设计

文中简要介绍了中巴合作地球资源卫星(CBERS)红外多光谱扫描仪主体(简称扫描仪主体)的组成和工作原理。     

基于Patran/Nastran的结构优化系统的工程应用

采用基于有限元软件Patran/Nastran二次开发的结构优化系统,对两个卫星结构进行了以重量为目标、考虑基频和应力等约束的优化设计.系统由用户在Patran环境下完成问题建模,优化过程中调用Nastran作结构分析并结合二级多点逼近算法寻优.设计对象是由蜂窝夹层板、不同截面形状梁、板壳等组成的典型复杂航天器结构,设计过程中还利用人机交互技术,最终使重量明显降低,为工程部门改进设计提供了依据.算例结果之一与其他结构优化系统结果一致,进一步说明了所开发系统的正确性.     

Study of GNSS-measured ionospheric total electron content variations generated by powerful HF-heating

The purpose of this work is to report the experimental evidences for the influence of perturbations in the electron density in the dayside mid-latitude ionosphere, that are caused by high-frequency heating of the F2 layer, on the GNSS signals. The experiments were carried out at the Sura heater (Radio Physical Research Institute, N. Novgorod). During the sessions of ionospheric heating with different time modulations of the radiated power the rays linking the navigational satellites with the ground receiver intersected the heated region. Variations in the total electron content (TEC) were studied; these variations are proportional to the reduced phases of navigational signals. It is shown that with the square-wave modulation of the radiated power (with periods of 1, 6, 10 and 15 min), perturbations with periods of the main modulation of heating and its harmonics appear in the spectrum of TEC variations. Examples are presented of identification of the heating-induced variations in TEC, including determination of the amplitudes and time characteristics of these variations.     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

风扇/压气机周向模态识别中传感器角度偏差的影响

基于任意角度压缩感知(CS)方法分析了传感器安装角度偏差对风扇/压气机周向模态识别重构的影响,设计了一套自适应角度优化程序修正重构误差。利用数值试验探究了传感器角度偏差和数量对周向模态重构结果的影响,研究表明:当角度偏差等级为2.5%时,平均重构误差达到10%以上,若保证重构误差基本不变,将传感器数量从7个增加至25个,仅可以将角度偏差等级放宽至4%。而采用小生境微种群遗传算法进行自适应角度优化,在20 dB信噪比下,通过自适应角度优化可将角度偏差等级从2.5%放宽至10%,降低了传感器安装的精度要求。成功优化了一款冷却风扇在前三阶叶片通过频率下的主要周向声模态重构幅值。自适应角度优化算法有效提升了基于压缩感知的风扇/压气机周向模态重构可靠性。     

我国风云卫星体系的发展思考

风云系列气象卫星发展始终坚持以国家重大战略为蓝图,以解决中国的气象观测问题为宗旨,秉承"开放合作、服务世界"的理念,发展具有中国特色的气象卫星观测体系.风云卫星是我国民用遥感卫星中应用范围最广、效益发挥最好的卫星系列之一,为国民经济发展和国防建设作出了重要贡献,已成为世界气象组织全球卫星观测网重要成员,是服务国家重大战...     

面向机载综合监视系统的ADS-B技术综述

广播式自动相关监视（ADS-B）作为机载综合监视系统（ISS）的新增重要组成部分,在保证飞机飞行安全的前提下,在监视成本和效率方面展现出优势,引领了未来监视技术的发展。本文首先介绍了ADS-B系统功能与优劣势,梳理了国内外技术和产品现状;然后从保障飞行安全和高效的角度出发,分析和综述了机载ISS中ADS-B的关键技术,并详细阐述了技术内涵及难点;最后结合下一代空域运行理念,探讨和展望了技术发展趋势,提出了4个ADS-B技术的未来发展方向,为推动ADS-B技术在实际运行与理论研究方面的发展提供参考。