VB6.0在分布式监控系统数据通信中的应用

介绍一种采用VB语言编程,实现分布式监控系统数据通信的方法,讨论了通信协议及 编程要点,并给出程序。     

小波分析在航空发动机性能趋势监控中的应用

简要分析了小波变换的原理、应用和算法。利用MATLAB编程，初步探讨了小波分析在发动机性能监控方面的应用。最后，通过实际的发动机数据对这种方法进行了验证，并对结果和应用前景进行了讨论。     

飞机主操纵系统疲劳试验载荷监控方法研究——应变数据分析法

针对某机全机主操纵系统疲劳试验中动态操纵情况下的应变测量以及试验载荷监控问题进行了分析和讨论,并对基于应变测量数据分析的操纵系统疲劳试验载荷监控方法的确定及其应用效果进行了阐述。在操纵系统疲劳试验过程中的实际监控结果表明,该方法对副翼/平尾/方向舵操纵系统多种试验状态下的试验载荷监控实用有效。     

基于线性神经网络的滑油金属含量预测

利用神经网络方法对某型航空发动机滑油监控系统中需重点监控的金属元素含量建立了网络，并根据该模型对其含量变化趋势进行了预测分析。某部队通过对不同实测数据的检验证明，可根据该模型的预测结果预报金属含量是否超标。     

Study of GNSS-measured ionospheric total electron content variations generated by powerful HF-heating

The purpose of this work is to report the experimental evidences for the influence of perturbations in the electron density in the dayside mid-latitude ionosphere, that are caused by high-frequency heating of the F2 layer, on the GNSS signals. The experiments were carried out at the Sura heater (Radio Physical Research Institute, N. Novgorod). During the sessions of ionospheric heating with different time modulations of the radiated power the rays linking the navigational satellites with the ground receiver intersected the heated region. Variations in the total electron content (TEC) were studied; these variations are proportional to the reduced phases of navigational signals. It is shown that with the square-wave modulation of the radiated power (with periods of 1, 6, 10 and 15 min), perturbations with periods of the main modulation of heating and its harmonics appear in the spectrum of TEC variations. Examples are presented of identification of the heating-induced variations in TEC, including determination of the amplitudes and time characteristics of these variations.     

煤矿监测监控系统数据集成模式

从煤矿监测监控系统的实际出发,分析国内外煤矿监测监控系统的发展现状和局限性,论述用高新技术改造我国传统煤矿监测监控系统的可行性和必要性,然后从监测监控系统的结构角度,分析煤矿监控系统现阶段的发展主流和未来的发展趋势,并最终提出相应的信息数据集成技术方案。     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

智慧温室群远程监控系统通信设计

温室监控系统是对温室环境中温度、湿度、光照度等环境因子实施监测与调控的农业设施,可确保农作物获得最适宜的生长发育环境。针对现有温室监控系统在通信上存在距离受限、组网复杂、能耗高且基本仅能实现单个温室控制的问题,设计了一种基于LoRa和NB-IoT相结合的智慧温室群远程监控系统通信模式。该模式以STM32F103C8T6单片机为核心控制器件,采用ATK-LoRa SX1278和NB-IoT模块自组无线通信网实现数据的远程交互。测试结果表明：采用该通信模式可实现温室群中各温室间距离在2km范围内的数据采集、处理和传输,其通信距离远、功耗低,数据传输可靠性符合现代化农业物联网的需求。     

压电-光纤综合结构健康监测系统的研究及验证

以某型无人机机翼盒段试验件为对象,进行了压电-光纤综合结构健康监测系统的研究。自主研发了国内首台集成压电多通道扫查系统,可实现多达552个激励 传感通道的损伤自动扫查,并同光纤光栅解调系统组合,自行开发了集成健康监测系统软件,构成了压电-光纤综合结构健康监测系统。基于该系统进行了大型碳纤维复合材料盒段试验件弯扭强度实验过程中的结构健康监测功能验证研究,监测结构尺寸达4000 m×1200 m×0.265 m,监测对象包括结构的应变场分布及抽钉失效。系统监测了全盒段上下壁板共34点的应变场分布情况,应变场监测准确;监测系统不仅对结构抽钉的缺失实现了准确监测,而且可以分辨所实验结构的4种抽钉缺失程度。     

基于Lamb波相控阵和图像增强方法的损伤监测

利用Lamb波和超声相控阵理论对结构进行损伤监测。选择合适的低频窄带激励信号,产生单一模式Lamb波,结合超声相控阵技术对结构进行多方位监测。针对原始损伤图像不完美的问题,研究基于点运算的对比度增强方法,改善图像质量,提高图像的可识别度和分辨率。在复合材料板结构和铝板结构中针对不同损伤类型的实验研究证明,运用图像增强技术后的损伤图像表征清晰、识别度高。