大型航天器SGCMG系统的奇异性分析研究

应用单框架控制力矩陀螺系统（SGCMG）是大型航天器姿控系统较为理想的选择，但是该系统存在严重的奇异现象，增加了操纵律的设计与开发的难度。文章从奇异性分析的角度对单杠架控制力矩陀螺系统的奇异状态进行了研究，提出了奇异可回避性的判别方法，并据此对SGCMG系统奇异状态进行了系统的分类，针对常用的各种构形的SGCMG系统进行了讨论。     

Precise line-of-sight modelling for angles-only relative navigation

This work presents a precise analytical model to reconstruct the line-of-sight vector to a target satellite over time, as required by angles-only relative navigation systems for application to rendezvous missions. The model includes the effects of the geopotential, featuring: the analytical propagation in the mean relative orbital elements (up to second-order expansion), the analytical two-way osculating/mean orbital elements’ conversion (second-order in $J_2$ and up to a given degree and order of the geopotential), and a second-order mapping from the perturbed osculating elements’ set to the local orbital frame. Performances are assessed against the line-of-sight reconstructed out of the precise GPS-based positioning products of the PRISMA mission. The line-of-sight modelled over a far-range one day long scenario can be fitted against the true one presenting residuals of the order of ten arc-seconds, which is below the typical sensor noise at far-range.     

A simple control law for reducing the effective characteristic acceleration of a solar sail

The direction and magnitude of a solar sail acceleration are strongly related. For this reason, once the characteristic acceleration has been fixed, it is not possible to modulate the acceleration in a particular direction. In this work, a semi-analytical switching control law is derived, enabling a solar sail to emulate a smaller effective characteristic acceleration (without changes in geometry or optical properties); by periodically changing the pitch (cone) angle of the sail, in average over time, the acceleration produced by the sail matches exactly (in both direction and magnitude) that of a “smaller” sail. The range in which this is possible is determined, and the limitations on this range due to the size difference is computed. The method is validated on optimal Earth-Mars trajectories.     

数控机床及工装的发展与创新设计

在现代数控加工中,由于被加工件的精度要求以及复杂度不断提高,传统加工系统无法满足使用需求,为解决这一问题,数字控制系统的核心算法以及驱动系统得到了快速发展,一些创新机构也应用到了数控机床的整机结构设计中.这些解决措施大幅提升了被加工件的精度和表面质量,促进了市场上一系列新型数控机床的出现,如复合机床、镜像铣削机床等,与之配合的新型加工工装技术也取得了相应的突破.     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

航空燃油齿轮泵滑动轴承非线性瞬态性能数值分析

为研究航空燃油齿轮泵滑动轴承在复杂交变载荷扰动下的瞬态润滑行为,建立了燃油齿轮泵滑动轴承的瞬态计算模型。该模型考虑了滑动轴承油膜空化边界的质量守恒和其所处非线性动态承载环境的影响。在此基础上使用批处理技术实现了燃油齿轮泵和滑动轴承的联合仿真计算,在滑动轴承的瞬态润滑计算过程中计入了燃油泵瞬态内流场和其动态载荷的耦合作用。以此进行了恒定载荷和动态载荷工况下的轴心轨迹稳定性分析以及轴承瞬态润滑性能分析研究。研究结果表明：滑动轴承计算模型的计算结果与实验数据较为吻合,误差保持1.2%以内;燃油齿轮泵的动态载荷对轴心轨迹的影响体现在轨迹启动段偏移的增大以及静平衡位置的消失;通过不同关键参数的对比研究发现：合理的增大宽径比或减小间隙比可以获得更为理想的轴心轨迹静平衡位置,但对于轴承转子运动的稳定性,间隙比由0.2%增至0.6%时,未稳定阶段轴心位置的变化趋势由双峰变为单峰,速度稳定段曲线的波动幅值先增大后趋于不变;当宽径比由0.6增至1.2时,全周期内速度响应曲线的偏移降低,轴心运行的稳定性提高;在轴承瞬态润滑特性中对于轴承载荷变化泄露流量具有的敏感性较强而最小油膜厚度的敏感性较差。     

编队卫星的状态测量方法综述及可行的高精度星间基线测量方案研究

基线高精度测量是编队卫星应用需要解决的关键技术之一。针对这个问题,文章从3个方面进行了阐述。首先,综述目前国内外常用的编队卫星状态测量手段,然后在前面分析的基础上,结合编队卫星基线的表示方法和卫星编队飞行的特点,提出了2种可行的基线激光测量方案,并对它们各自的测量精度进行了简单地分析。从分析的结果来看,这2种方法均能实现高精度的基线测量。