气垫悬浮技术的应用研究

航空制造业对飞机的装配时间和装配质量提出较高要求,建立移动式生产线可有效提高飞机的装配效率和质量。结合Q400机身对接产品移动式生产线的建立,对气垫悬浮装置的工作原理和特点进行深入研究,着重对移动型架的结构进行设计说明和有限元分析,对气垫装置的布置、数量、驱动力等主要技术参数进行详细地计算分析。通过将气垫悬浮装置应用于移动式生产线,证明该装置满足飞机装配高质高效的要求。研究结果可作为其他飞机移动式生产线设计的参考和借鉴。     

Categorical Bias in Line Angle Judgments: Sex Differences and the Use of Multiple Categories

According to the Category Adjustment (CA) model, spatial estimates (e.g., of location) involve Bayesian combination across multiple, hierarchical pieces information, each weighted by its relative certainty. Recent work, though, has shown that men and women differ in terms of their certainty regarding fine-grained and categorical information in location memory. Here we demonstrate that this reflects a more general sex difference in visuospatial processing by examining bias patterns in a line angle judgment task (JLAP-15). In addition, the data suggest that multiple, hierarchical levels of categorical information influenced spatial judgments. These results imply that the hierarchical combination outlined by the CA model extends beyond two levels, and that men and women apply differential weighting to these representations.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

R-PP改性沥青侧缠绕管道防腐作业线的研制与应用

本文着重介绍R-PP改性沥青侧缠绕管道防腐作业线的工作原理及研制过程。通过防腐实验，对作业线存在的若干技术问题进行了改进和调整，为作业线应用于管道防腐提供了必要的技术依据。     

微特电机全温度自动补偿原理及参数的确定

设计了全温度自动补偿电路，提高微特电机主要性能指标的温度稳定性．它的工作原理简单；电路参数的确定采用计算机辅助计算方法——具有连续延伸和自动改变初值的加速寻优的单纯形方法，不仅快捷、准确，而且稍加修改也可适用于任何多元非线性方程组的求解     

轻型塔架挠度速算法

本文介绍了轻型塔架的挠度速算法,并以三角形截面的钢塔架为例题作了计算公式推导。这种方法具有计算简单和具有足够精度的优点。     

基于数字孪生的智能脉动管控

为提升飞机总装脉动生产线智能化水平,开展了基于数字孪生的智能脉动管控研究。基于数字孪生五维模型理论构建了飞机总装脉动生产线数字孪生应用架构,从反应式计划调度、物流精准配送、智能作业指导、产线健康监视、资源迭代优化配置5个方面开展了技术研究,为复杂产品装配的智能制造应用提供参考。     

Comparison of vertical E × B drift velocities and ground-based magnetometer observations of DELTA H in the low latitude under geomagnetically disturbed conditions

In the present work, we analyzed the daytime vertical E × B drift velocities obtained from Jicamarca Unattended Long-term Ionosphere Atmosphere (JULIA) radar and ΔH component of geomagnetic field measured as the difference between the magnitudes of the horizontal (H) components between two magnetometers deployed at two different locations Jicamarca, and Piura in Peru for 22 geomagnetically disturbed events in which either SC has occurred or Dst_max < ?50 nT during the period 2006–2011. The ΔH component of geomagnetic field is measured as the differences in the magnitudes of horizontal H component between magnetometer placed directly on the magnetic equator and one displaced 6–9° away. It will provide a direct measure of the daytime electrojet current, due to the eastward electric field. This will in turn gives the magnitude of vertical E × B drift velocity in the F region. A positive correlation exists between peak values of daytime vertical E × B drift velocity and peak value of ΔH for the three consecutive days of the events. It was observed that 45% of the events have daytime vertical E × B drift velocity peak in the magnitude range 10–20 m/s and 20–30 m/s and 20% have peak ΔH in the magnitude range 50–60 nT and 80–90 nT. It was observed that the time of occurrence of the peak value of both the vertical E × B drift velocity and the ΔH have a maximum (40%) probability in the same time range 11:00–13:00 LT. We also investigated the correlation between E × B drift velocity and D_st index and the correlation between delta H and D_st index. A strong positive correlation is found between E × B drift and D_st index as well as between delta H and D_st Index. Three different techniques of data analysis – linear, polynomial (order 2), and polynomial (order 3) regression analysis were considered. The regression parameters in all the three cases were calculated using the Least Square Method (LSM), using the daytime vertical E × B drift velocity and ΔH. A formula was developed which indicates the relationship between daytime vertical E × B drift velocity and ΔH, for the disturbed periods. The E × B drift velocity was then evaluated using the formulae thus found for the three regression analysis and validated for the ‘disturbed periods’ of 3 selected events. The E × B drift velocities estimated by the three regression analysis have a fairly good agreement with JULIA radar observed values under different seasons and solar activity conditions. Root Mean Square (RMS) errors calculated for each case suggest that polynomial (order 3) regression analysis provides a better agreement with the observations from among the three.     

基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

超精密CNC平面磨床在线测量、补偿加工及对刀功能的自动化实现

介绍了大型超精密ＣＮＣ平面磨床测量控制系统设计中多传感器在线检测、导轨误差补偿加工以及超精密磨削对刀等特殊功能的实现方法,并将其纳入ＣＮＣ的Ｍ功能指令系统,实现了超精密平面磨削自动化