新一代火箭控制系统总线应用技术研究

从运载火箭控制系统工程需求出发，在研究总线技术及其在航天领域中的应用背景的基础上，分析了箭上控制系统总线应用技术的可靠性和必要性，提出了箭上总线控制系统的基本模型，探讨了箭上总线开发、应用、系统设计等有关技术问题。     

Galileo real-time orbit determination with multi-frequency raw observations

Real-time GNSS-based applications require corresponding real-time orbit products. While traditional GNSS orbits are generated with the dual-frequency IF (Ionosphere-Free) model, the increase of multi-frequency signal satellites brings new challenges for the data processing. Therefore, real-time orbit determination with the multi-frequency UC (Uncombined) model is introduced in this study considering its flexibility. With the derived mathematical model conforming to IGS (International GNSS Service) dual-frequency clock definition and one-week triple-frequency Galileo observation data from 90 IGS network stations, the convergence and accuracy of real-time orbits is assessed and the characteristics of satellite IFCB (Inter-Frequency Clock Bias) are analyzed. Results indicate that the model differences, including dual-frequency IF model, dual-frequency UC model and triple-frequency UC model, contribute to only cm-level differences with CODE (Center for Orbit Determination in Europe) final orbits after a convergence time of around 12 h. The constellation-mean RMS (Root Mean Square) differences of the converged real-time orbits with the CODE final orbits reaches about 5.0 cm, 7.0 cm and 5.0 cm for the radial, tangential and normal directions. The convergence of satellite IFCB is much faster than that of satellite orbit, which reflects a loose correlation between these two parameters. While the Galileo satellite IFCB are temporally stable, the modeling of satellite IFCB may be unreliable when over constrained and becomes even more unstable with commonly encountered datum changes. In summary, real-time GNSS orbit determination with multi-frequency raw observations is feasible and extendable with proper treatment of IFCB.     

Real-time coseismic wave retrieving by integrated Kalman filter with observations of GPS,Glonass and strong-motion sensor

A method of real-time coseismic wave retrieving was proposed based on the tight integration of GPS, Glonass and strong-motion sensor observations, the validation and precision analysis have been made by an experimental data. The series of results have been shown that: by the integrated Kalman filter and multi-sensors, the coseismic waves can be optimally recovered by complement the advantages of each other, especially when the observation conditions are very bad. In additional, the results are not significantly effected by different receiver clock error processes for the integration solution.     

Real-time zenith tropospheric delays in support of numerical weather prediction applications

The Geodetic Observatory Pecný (GOP) routinely estimates near real-time zenith total delays (ZTD) from GPS permanent stations for assimilation in numerical weather prediction (NWP) models more than 12 years. Besides European regional, global and GPS and GLONASS solutions, we have recently developed real-time estimates aimed at supporting NWP nowcasting or severe weather event monitoring. While all previous solutions are based on data batch processing in a network mode, the real-time solution exploits real-time global orbits and clocks from the International GNSS Service (IGS) and Precise Point Positioning (PPP) processing strategy. New application G-Nut/Tefnut has been developed and real-time ZTDs have been continuously processed in the nine-month demonstration campaign (February–October, 2013) for selected 36 European and global stations. Resulting ZTDs can be characterized by mean standard deviations of 6–10 mm, but still remaining large biases up to 20 mm due to missing precise models in the software. These results fulfilled threshold requirements for the operational NWP nowcasting (i.e. 30 mm in ZTD). Since remaining ZTD biases can be effectively eliminated using the bias-reduction procedure prior to the assimilation, results are approaching the target requirements in terms of relative accuracy (i.e. 6 mm in ZTD). Real-time strategy and software are under the development and we foresee further improvements in reducing biases and in optimizing the accuracy within required timeliness. The real-time products from the International GNSS Service were found accurate and stable for supporting PPP-based tropospheric estimates for the NWP nowcasting.     

新一代航天电子系统现场总线及其应用

针对航天电子系统的特殊性，从航天电子系统现场总线技术的发展现状出发，结合现场总线技术的特点，分析了现场总线未来的发展方向。重点介绍了新一代航天电子系统现场总线——有限级联自动重构总线（FCARB）及其在某测量存储系统中的应用。测量存储系统可实现数据并发量10 M，时间同步精度750 ns，系统实时性260 ns。与传统的航天总线相比，新一代现场总线在自动重构、实时性、支持BIT模式、支持仪器总线等方面具有更高的性能，同时对用户更加友好，兼容性更强，能够适应高冲击、高动态等恶劣环境。     

Evolution analysis of a UAV real-time operating system from a network perspective

With the flourishing development of Unmanned Aerial Vehicles (UAVs), the mission tasks of UAVs have become more and more complex. Consequently, a Real-Time Operating System (RTOS) that provides operating environments for various mission services on these UAVs has become crucial, which leads to the necessity of having a deep understanding of an RTOS. In this paper, an empirical study is conducted on FreeRTOS, a commonly used RTOS for UAVs, from a complex network perspective. A total of 85 releases of FreeRTOS, from V2.4.2 to V10.0.0, are modeled as directed networks, in which the nodes represent functions and the edges denote function calls. It is found that the size of the FreeRTOS network has grown almost linearly with the evolution of the versions, while its main core has evolved steadily. In addition, a k-core analysis-based metric is proposed to identify major functionality changes of FreeRTOS during its evolution. The result shows that the identified versions are consistent with the version change logs. Finally, it is found that the clustering coefficient of the Linux OS scheduler is larger than that of the FreeRTOS scheduler. In conclusion, the empirical results provide useful guidance for developers and users of UAV RTOSs.     

Period selection for integrated controller tasks in cyber-physical systems

Performance optimization of cyber-physical systems(CPS)calls for co-design strategies that handle the issues in both computing domain and physical domain.Periods of controller tasks integrated into a uniprocessor system are related to both control performance and real-time schedulability analysis simultaneously.System performance improvement can be achieved by optimizing the periods of controller tasks.This paper extends an existing model to select task periods in real-time for CPS with fixed priority controller tasks scheduled by rate-monotonic algorithm.When all the tasks can be integrated,the analytic solution of the problem is derived by using the method of Lagrange multipliers and gradient descent method is evaluated to be suitable online.To further deal with the condition that the system is overloaded,an integrated method is proposed to select periods of tasks online by selecting a subset of tasks first and then optimizing the periods for them.Experimental results demonstrate that our method yields near-optimal result with a short running time.     

空气动力对飞机内藏式导弹分离轨迹影响的低速风洞试验研究

在４ｍ×３ｍ低速风洞中研究了空气动力对战斗机内藏式导弹弹射分离轨迹的影响。采用简单网格法测量了导弹在干扰流场中的气动力，进行了分离轨迹估算，用捕获轨迹试验得到了分离轨迹，选定了最佳弹射力参数。试验结果表明，实验导弹安全分离必须采用弹射力，气动俯仰力矩是影响导弹姿态的重要因素，气动力对分离位置影响较小。     

超高分辨率相机成像检测系统的设计与实现

讨论了超高分辨率相机成像检测系统的设计;分析了系统的设计目标;设计了系统的架构;给出了系统实现的技术指标。     

一种大型紧缩场极坐标测试扫描架系统的设计与实现

扫描架系统是现有紧缩场现场校准方法的核心测试设备,扫描架系统的各项技术指标对于紧缩场校准至关重要,其中具有代表性的关键指标是扫描范围和扫描平面度。为提高紧缩场现场计量校准的适应性,本文设计了一种大型模块化扫描架系统,具有自调整机构和多种安装方式,在最大模式下扫描半径可达到3000mm、中心高可达12m、扫描平面度可达0.05mm(RMS);在最紧凑模式下扫描直径为3000mm、中心高可降至4m;可适用于国内多数紧缩场。目前,该系统完成技术指标的检测,可应用于多型紧缩场现场校准测试。