空间晶体生长炉综合控制方法

空间晶体生长炉控制对象复杂, 具有纯滞后、强耦合、非线性等不利于控制的特性. 为实现炉温的精确控制, 提出了一个空间晶体生长炉综合控制方法并通过软件来实现. 将相关系数法和增广递推最小二乘法相结合, 辨识系统模型, 使用Hooke-Jeeves模式搜索法进行PID参数的自整定, 采用PID加前馈控制的算法对系统进行仿真, 使用同样的算法和控制参数对空间晶体生长炉进行实时控制, 并在控制的过程中实时调整控制参数, 以达到最佳的控制结果. 实验结果表明, 当三个温区的温度均达到700oC时, 温度稳定度小于±0.3oC, 满足系统设计要求. 同时介绍了实现综合控制软件的基本原理、功能、特点及在实际中的应用. 实际工程的应用结果表明, 该软件可满足空间晶体生长炉对控制系统的要求.      

基于LightGBM的HXMT在轨运行模式监测算法

HXMT卫星的空间硬X射线巡天和定点观测计划切换频繁,需要对卫星有效载荷在轨状态进行实时监测和判别.目前采用的是地面监测人员根据总结的规则进行人工监测的方式,虽然执行方便,可解释性强,但人力消耗较大,且对规则之外的情况无法灵活处理.本文利用HXMT卫星的实时遥测数据,提出一种基于LightGBM机器学习模型的在轨运行模式监测算法,将监测工作规约为多分类问题,并构建判别模型,对卫星在轨运行模式进行判断.在保障判别准确率的前提下,算法模型构建迅速,具有很高的实用性.基于真实遥测数据的试验表明,模型的判别准确率达到99.9%,满足在轨运行模式监测要求,可为HXMT卫星的运行监控任务提供参考依据.      

高速、大容量遥感遥测数据记录与分析系统

介绍一种基于 SCSI磁盘的高速、大容量卫星数据实时记录与分析系统 ,详细分析系统的设计思想、工作原理、系统性能指标测试和应用情况。该系统可将转输速率最高可达 4 0 0 Mbps的遥感遥测数据直接记录到磁盘中 ,不经过计算机的操作系统及数据总线 ,有效地解决了高速持续数据流磁盘记录的瓶颈问题。系统最大存储量可达 1TB以上 ,事后能对记录在磁盘上的数据进行分析和处理     

一种分布式信息融合的航天器实时轨道确定算法

针对传统航天器集中式实时轨道确定方法对计算中心依赖性强、鲁棒性差等问题,在分布式混合信息滤波算法(DHIF)的基础上,提出一种基于分布式信息融合的航天器实时轨道确定算法。通过该算法各测站融合自己和邻居节点的状态信息及量测信息,可同时对目标航天器进行局部实时定轨。该算法支持包含多类型传感器的观测网络,对定轨系统局部变化适应性强。仿真结果表明,该分布式定轨算法使各测站局部定轨精度优于单站滤波定轨精度,且一致逼近于多站集中式滤波定轨精度,测站局部定轨的收敛速度取决于测站网络通信的拓扑结构。     

基于多分辨率复合阵列的未知信源数波达方向估计

为解决信源数未知情况下的多分辨率复合阵列波达方向(DOA)估计问题,将未知信源数的相干信号DOA估计算法拓展到多分辨率复合阵列中。本文研究了基于子阵空间谱联合的DOA估计方法,首先构造各个子阵列的托普利兹矩阵,并进行未知信源数的相干信号DOA估计;然后利用多分辨率复合阵互质的特性,构建联合代价函数进行解模糊。针对全范围搜索计算量大的不足,文中提出了单个不模糊区搜索,反推全部模糊角度的改进方案。仿真结果验证了所提方法的有效性,相比于全空间搜索的MUSIC算法和Capon算法,该算法无需信源数先验信息,且在信噪比大于15 dB和快拍数大于300时,其DOA估计的均方根误差仅为传统方法的1/2。     

强容错的航空发动机空中停车实时监测逻辑研究

为了确保航空发动机空中再起动策略或飞行员应急操作的快速执行,本文设计了一种具备强容错性的空中停车实时监测逻辑。该逻辑组合了风扇转速、压气机转速、涡轮后温度和换算主燃油流量的空中停车故障特征,融合了监测阈值设定、参数变化范围限制和反向惩罚处理等容错性策略,可适应发动机个体差异及性能衰退、非标准天、传感器正常噪声扰动和单一传感器故障。为检验该逻辑的鲁棒性和容错性,本文采取按任务剖面运行测试和全包线随机加减速测试相结合的方式。虚警测试和检测性能验证结果表明,当发动机正常运行或发生单一传感器故障时,该监测过程均无虚警;相比于继承自АЛ-31Ф发动机的空中停车监测逻辑,本文提出的监测逻辑具备更好的检测性能;当单一传感器发生故障时,该监测过程的检测性能无降级情况。     

试验靶场地面数据交换模式研究

以我国未来导弹航天试验任务发展对试验靶场的需求为出发点,针对靶场试验信息交换数据异构的问题,提出了3种靶场地面数据交换的方式．并且对其进行了定性的分析,希望通过引入先进的信息技术和国外的通用做法,能够对我国试验靶场数据交换的发展起到启示和借鉴作用。     

液体火箭发动机地面试车实时故障检测参数的选取

合理有效的参数选择是液体火箭发动机地面试车实时故障检测系统的一个核心而基础的研究问题.本文首先进行了检测系统采集参数的需求分析;之后将液体火箭发动机测量参数作为方案层,各测量参数对发动机故障的敏感性、参数稳定性和参数相关性等作为准则层,测量参数对实时故障检测的有效性作为目标层,建立了液体火箭发动机参数选择层次结构模型;最后利用模糊层次分析法确定了某型LRE地面试车的实时故障检测参数.通过历史试车数据对参数选择的效果分析表明:所确定的检测参数能够全面表征LRE的运行状态,具有较强的故障表征能力和故障敏感性.从而,为科学合理的选择发动机地面试车实时故障检测参数提供了根据,解决了一直以来依靠定性方法确定发动机检测参数的问题.     

Analysis of GNSS clock prediction performance with different interrupt intervals and application to real-time kinematic precise point positioning

Continuous and timely real-time satellite orbit and clock products are mandatory for real-time precise point positioning (RT-PPP). Real-time high-precision satellite orbit and clock products should be predicted within a short time in case of communication delay or connection breakdown in practical applications. For prediction, historical data describing the characteristics of the real-time orbit and clock can be used as the basis for performing the prediction. When historical data are scarce, it is difficult for many existing models to perform precise predictions. In this paper, a linear regression model is used to predict clock products. Seven-day GeoForschungsZentrum (GFZ) final clock products sampled at 30 s are used to analyze the characteristics of GNSS clocks. It is shown that the linear regression model can be used as the prediction model for the satellite clock products. In addition, the accuracy of the clock prediction for different satellites are analyzed using historical data with different periods (such as 2 and 10 epochs). Experimental results show that the accuracy of the clock with the linear regression prediction model using historical data with 10 epochs is 1.0 ns within 900 s. This is higher accuracy than that achieved using historical data of 2 epochs. Finally, the performance analysis for real-time kinematic precise point positioning (PPP) is provided using GFZ final clock prediction results and state space representation (SSR) clock prediction results when communication delay or connection breakdown occur. Experimental results show that the positioning accuracy without prediction is better than that with prediction in general, whether using the final clock product or the SSR clock product. For the final clock product, the positioning accuracy in the north (N), east (E), and up (U) directions is better than 10.0 cm with all visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 15.0 cm to 7.0 cm. For the SSR clock product, the positioning accuracy of N, E, and U directions is better than 12.0 cm with visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 12.0 cm to 9.0 cm.     

An improved real-time cycle slip correction algorithm based on Doppler-aided signals for BDS triple-frequency measurements

Doppler, which is an instantaneous GNSS observable signal, has been proven effective in determining velocity and acceleration due to its high availability and accuracy. We propose a real-time triple-frequency cycle slip correction (CSC) method based on Doppler-aided signals because Doppler shift is time-independent and immune to cycle slips. When the sampling interval is less than 1 s, cycle slips on triple-frequency can be detected and repaired using pure Doppler data with high reliability; however, this method cannot be used when the sampling interval exceeds 1 s because the integral cumulative error of Doppler increases significantly. For such cases, a modified triple-frequency CSC approach has been developed based on the raw phase and smoothed code data that was refined using the Doppler signal. To suppress the effect of the integral Doppler error, a balance factor is introduced to adjust the contributions of the raw code and Doppler observables. After the refinement of the GNSS data, three independent combinations need be selected to detect and repair cycle slips with triple-frequency observations. Four constrained criteria have been proposed to select optimal combinations that can reduce the residual ionospheric delay (RID) and measurement noise to a low level. Finally, experiments were carried out to test the performance of the new method using real triple-frequency BDS observations (GPST: 3:15:00–5:55:00, March 23, 2018). The results show that pure Doppler can detect and repair cycle slips effectively with small intervals, and modified Hatch-Melbourne-Wübbena (HMW) method based on Doppler-aided signals can achieve 99.7% success rate in cycle slip correction with large intervals (up to 30 s).