HED-21S数控综合实验台画笔自动控制机构设计

以数控系统的PLC控制为基础,设计HED-21S机械笔控制系统结构,它可控制电磁铁的动作,执行画笔的上下运动。这支笔在X、Z型十字窗格可以绘制任意几何形状,该设计符合要求的快速定位数控直线移动,及圆弧插补功能,有助于提高数控编程效率和数控教学质量。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

复杂电磁环境中智能决策对抗技术的应用

当前雷达技术的发展突飞猛进,复杂的电磁环境已经是战场必须面对的现实情况,提出了一种可适应战场复杂电磁环境的智能干扰技术,主要从分选、干扰策略和干扰效能评估等方面讨论了整个智能对抗干扰的原理,对战场指挥决策有一定参考价值。     

倾转四旋翼飞行器垂直飞行状态气动特性

综合采用基于滑移网格技术的计算流体力学(CFD)方法与悬停状态气动干扰试验方法,对倾转四旋翼(QTR)飞行器垂直飞行状态的流场进行模拟与试验,研究飞行器垂直飞行状态气动特性以及部分参数对气动特性的影响.结果表明:倾转四旋翼飞行器在垂直飞行状态,前后旋翼之间干扰不明显,但旋翼与机翼的干扰明显;旋翼旋向对旋翼与机翼的干扰不...     

桨叶实度及轴间距对摆线桨气动特性影响研究

悬停状态下,设计参数和摆线桨间距离对摆线桨的气动特性有较大影响。首先通过算例验证滑移网格计算方法应用于摆线桨悬停状态下气动力计算的准确性,然后研究摆线桨在不同半径、弦长和桨叶数时的气动参数特性,最后计算分析不同距离时,摆线桨间的气动干扰特性。结果表明:随着半径增大,桨叶气动力和单位面积上载荷均增大;弦长越大,气动力越大,桨叶单位面积上载荷反而越小;4叶片摆线桨产生的气动力比3叶片和6叶片大,而3叶片的桨叶载荷最大;合力偏转角分别随转速和实度的增大而减小;随着摆线桨间距离的增加,气动力损失系数和合力偏转角均减小。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

低速增压风洞支架干扰的数值研究

对气动院FL-9低速增压风洞尾撑支架干扰进行数值计算.通过合理的拓扑结构,生成了YF-16模型的分区对接网格.计算对模型的典型安装状态进行研究,获得了全机气动特性和支架干扰量,探讨了此安装状态下弯刀对飞机气动力的干扰特性,并重点研究了Re数对干扰量的影响规律.     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

用于压气机流动计算的3种模型比较

为了更好地对压气机流动进行模拟,在课题组自行开发的结构化有限体积解算器上实现了用于压气机流场计算的混合平面法、谐波平衡法及相滞后法.以NASA Stage 35为例,对3种方法的计算结果进行了比较分析.结果表明:相滞后法的计算精度最高,混合平面法的计算精度最低;相滞后法与半环的双时间推进法结果相近,计算速度提高了20倍;相比混合平面法,谐波平衡法能准确地模拟动静叶间的非定常干涉及进出口参数变化;在谐波阶数达到5阶后,谐波平衡法计算得到的结果不随阶数变化,且与相滞后法的结果基本吻合;混合平面法的计算效率远高于另外两种方法,相滞后法与谐波平衡法在谐波阶数为5阶时的计算效率相当.      

电磁悬浮微陀螺概述

微陀螺具有体积小、 功耗低等优点,但其精度目前仍然较低.在传统陀螺中,电磁悬浮陀螺的精度非常高,因此,对电磁悬浮微陀螺进行研究,有望获得高精度的微陀螺.介绍了电磁悬浮微陀螺的分类、 原理、 优缺点、 结构以及研究现状.首先根据悬浮原理将电磁悬浮微陀螺分为基于磁吸力的电磁悬浮微陀螺、 基于排斥力的电磁悬浮微陀螺、 静电悬浮微陀螺、反磁悬浮微陀螺和超导磁悬浮微陀螺;然后分别介绍了每种电磁悬浮的悬浮原理和优缺点,以及每种电磁悬浮微陀螺的发展现状、 样机结构和转子的悬浮旋转原理;最后,简述了电磁悬浮微陀螺的发展前景.