基于预测脱靶量的远程拦截速度增益导引

 针对拦截器使用耗尽关机固体燃料发动机的情况,设计了大气层外目标拦截的速度增益导引方法。导引律中根据Lambert导引确定指令推力方向初值,利用剩余速度增量信息,计算惯性速度增益下的预测脱靶量,使用Kepler轨道摄动方程计算消除脱靶量所需的速度增益修正,根据惯性速度增益和速度增益修正之和确定指令推力方向。给出了一种计及J2项引力摄动影响的滑行段弹道预测半解析方法,减少导引律运算量,降低导引方法误差;导引律中引入了剩余速度增量测量环节,增强了导引精度对推进系统参数的鲁棒性。与传统的通用能量管理（GEM）导引相比,采用该导引律拦截远程目标时指令推力方向平稳、变化范围小,脱靶量降低了两个数量级。     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

仅用作航空器追踪的北斗机载设备适航要求分析

北斗卫星导航系统（简称北斗）在民用航空器中安装应用的前提是明确和符合北斗机载设备的适航要求。但由于全球定位系统（GPS）与北斗在星座结构、信号体制及功能上的不同，导致目前国际上全球卫星导航系统（GNSS）相关适航标准不适用于北斗设备。标准的缺失严重制约北斗民航产业发展，急需进行自主研究与制定。针对北斗在民用航空器中应用第一阶段的功能及场景，即仅用作航空器追踪，分析当前可参考标准的适用性，明确适航要求的制订策略及框架，综合考虑适航安全性、民航对北斗机载设备的紧迫需求，未来机载设备的发展方向，以及当前工业水平，提出一套仅用作航空器追踪的北斗机载设备适航要求，形成审定要素及评审要求，可支持工业方对适航标准的理解。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

空天机复合循环推进技术新概念研究——液化空气循环在其中的应用

研究了空天机复合循环推进技术中的一个新概念——以液化空气循环为基础的SERJ组合发动机性能。计算了空气液化后分离为液氧和液氮后组合发动机在不同高度、不同飞行马赫数下的性能曲线,并考虑了液化空气量对组合发动机性能的影响。对计算结果的分析表明,液化空气循环虽然使组合发动机推力下降,但能使比冲有较大幅度的上升;液化空气量过大与过小均不利于进一步提高比冲性能,而是存在一个最佳值。     

制导站可靠性验证试验中的故障统计

故障统计是制导站可靠性验证试验中最重要的环节之一。制导站是一个可修复的大型系统，其中电子元件数以十万计，技术难度高，造价亦高。通过对预防性维修、短寿命元器件超期使用、可靠性增长的纠正措施、责任故障和非责任故障、故障定级和加权系数等问题的分析，提出了制导站可靠性验证试验中故障统计的实用程序及流程框图。     

控制系统冗余测试技术

本文论述了对复杂控制系统实施冗余测试的必要性、冗余测试系统的设计原则、冗余测试系统设计中必须解决的几个关键技术问题。最后,作为实例,简要介绍了我国火箭控制系统第一个比较完善的冗余测试系统—CZ—3冗余监测系统的设计及应用情况。     

性能可靠性的Bayes点估计

基于共轭型先验分布与无信息先验分布，给出了正态与对数正态分布的单边与双边性能可靠性的Ｂａｙｅｓ点估计，并用数值例说明了这些方法。     

一种变论域模糊自适应导引律研究

针对空空导弹的导引律问题，基于模糊逻辑和遗传算法．提出了一种论域自调整的进化模糊导引律。将导弹与目标的接近速度以及导弹的视线角速度作为模糊控制器的输入，指令加速度作为输出，并在传统的模糊逻辑控制基础上引入了一个非线性变论域函数，从而实现了模糊变量论域的动态改变，然后使用遗传算法对导引规则进行了寻优。以某型空空导弹模型为对象使用MATLAB对导弹攻击过程进行了仿真。仿真结果表明，该方法的机动过载小，拦截飞行时间短，是一种较为优越的制导方法。     

浅谈高效应力筛选与电子产品可靠性

指出高效应力筛选是保证电子产品可靠性的有效途径。并结合号可靠性工程实际介绍了高效应力筛选的应用情况、典型结果和实践经验，并提出了开展筛选试验的注意事项和当前亟待解决的问题。