提高机载电子产品的可靠性——某告警系统的故障分析

介绍电子产品设计时元器件选用对系统可靠性的影响。结合实际案例,总结并强调在电子产品设计时的元器件选用应从质量等级入手,充分进行降额设计和热设计。阐明合理选用元器件是实现电子产品系统设计高可靠性水平的基础。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

双拦截弹拦截单目标边界型微分对策制导律研究

针对战术弹道导弹、高超声速巡航导弹和无人飞行器等新型具有高机动性能的防空目标,为提高成功拦截的概率,采用多枚拦截弹进行拦截。应用微分对策理论,将双拦截弹拦截单目标的末段制导问题建模为“二对一追踪-逃逸”对策模型。考虑最大加速度约束,研究了两枚拦截弹的拦截空间分解和对策空间分布,并通过仿真研究了制导律性能。结果表明：采用两枚拦截弹拦截时,脱靶量对目标机动方向的转变时间具有很好的鲁棒性。     

固体火箭的鲁棒自适应耗尽关机制导方法研究

针对固体火箭的耗尽关机制导问题,提出了一种基于闭路制导和零射程线相结合的自适应耗尽关机制导方法,该方法首先利用闭路制导技术,使待增速度快速收敛;随后基于零射程线理论,设计了对关机时间变化不敏感的零射程线能量耗散管理导引律和末速精调导引律,提高了耗尽关机方法在推力、秒耗、关机时间随机摄动条件下的鲁棒性和自适应性以及制导精度,从而拓展了耗尽关机显示制导方法的工程化应用.     

火箭返回制导动力着陆段的自适应启动方法

针对重复使用火箭垂直返回着陆问题,提出了一种燃料最优的动力着陆段自适应启动方法。首先,将燃料最优启动点对应的动力着陆轨迹的推力剖面和攻角剖面描述为解析的形式,该解析形式中攻角剖面由状态量唯一确定,推力剖面仅含一个待定参数。随后,通过预测具有上述解析剖面形式的轨迹判断是否启动动力着陆。计算中引入松弛终端位置约束的策略求解推力剖面待定参数,由终端位置约束判断是否满足燃料最优启动条件。上述策略将燃料最优启动条件的判断问题简化为单一变量求解问题,实现了该问题的快速求解。仿真结果表明,该方法得到的启动点与数值优化方法得到的燃料最优启动点接近,且求解过程稳定、计算效率高。     

导引头量测故障下的增量式三维制导律设计

考虑导引头量测故障下拦截机动目标的末制导问题,以提高制导系统的鲁棒性、降低制导增益、减小系统残差、避免视线角速率剧烈振荡/发散为目的,基于增量式控制方法设计了一种具有鲁棒增强特性的三维末制导律。首先,将末制导问题转化为零化视线角速率的控制问题。其次,通过弹目相对距离及视线角速率定义辅助变量,给出传统的滑模制导律作为设计参考。然后,基于增量式非线性动态逆滑模控制方法,充分挖掘视线角加速度估计信息及上一采样时刻的制导指令,得到增量式三维鲁棒制导律。最后,在目标机动及导引头量测故障下,分析并比较了两种制导律所产生的系统残差。理论分析及多工况仿真结果表明,增量式制导律不仅对目标机动及大范围失效的导引头量测故障具有强鲁棒性,而且所需制导增益也较小,同时避免了末端视线角速率严重发散的问题     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

交会对接寻的段水平双脉冲交会轨道精确求解

基于考虑摄动影响的精确轨道动力学模型,对交会对接寻的段水平双脉冲交会轨道的精确求解方法进行了研究。提出了将控制脉冲的俯仰角近似转化为控制时刻的轨道幅角,从而调整脉冲控制时刻以消除径向速度增量的方法,精确求解首末水平双脉冲的启控时刻;引入导引终点位置偏差的比例控制方法,精确求解水平双脉冲的精确控制量。仿真结果表明,2轮整体迭代可获得首末水平脉冲控制时刻和控制量的精确值,脉冲水平特性达到俯仰角小于1°,导引终点相对位置精度达到10m,验证了该方法的正确性。     

一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

航天飞行器中舷窗温度场及换热的研究：外部界面处于第三类非线性边界条件

本文采用控制容积法,光线踪迹法结合谱带模型,研究航天飞机返回大气层时舷窗硅玻璃的非稳态复合换热。文章给出了界面S_2处于第三类非线性边界条件下,舷窗硅玻璃内部的温度场和进入机舱内部的热流密度。计算结果表明,如不考虑硅玻璃内部的辐射作用,对温度场影响不太大,但对进入机舱内的热流密度将会产生很大的误差。