光学压力敏感涂料测量技术及其在内流场应用

本文介绍了应用基于发光强度的全域压力测量方法进行叶片表面压力分布的一系列实验结果。在自主建立光学压力测量系统和自主研发国产压力敏感涂料的基础上,对高亚音速叶栅风洞出口处大弯度孤立叶片吸力面和对转压气机实验平台出口整流叶片吸力面的压力分布进行了测量,并采用传统电子静压扫描装置在高亚音速叶栅风洞中进行了同步测量。光学压力测量与电子压力扫描结果的对比表明所建立的光学压力测量系统可用于内流场测量,其精度达到了工程应用水平。     

发射药颗粒床中对流燃烧的实验研究

设计了耐压值为1000MPa的半密闭爆发器, 研究了单基发射药颗粒床中的点、传火过程和压力波动现象, 考察了实验参数(推进剂特性、空隙率、剪切片厚度等)对多孔床中对流燃烧特性的影响。实验观察到一维压力波的传播与反射;火焰传播过程中药床存在动态压缩现象, 这是形成压力波的主要因素;在低的装填密度下, 药床中未形成一维燃烧波。      

组分对硝酸酯增塑聚醚推进剂燃烧性能的影响

通过对氧化剂AP含量及粒径、燃速催化剂种类及含量、铝粉粒度、交联剂及工艺助剂等的调整，对硝酸酯增塑聚醚推进剂的燃烧速度和燃速压强指数进行了研究，结果表明，燃速在7．7～16．7mm／s（7．0MPa）范围内可调，静态燃速压强指数稳定在0．5，最低可达0．41。     

新型高超音速静压探针的设计和实验

参考了近40年来国外有关超音速和高超音速静压探针的研究成果,设计了多种并发展了二种高超音速静压探针。它们可精确地用于持续工作流场仅为30ms的流场静压测量。实测静压与自由流静压比p_(s,m)/p_(s,∞)=1.009;马赫数比M_(∞m)/M_(∞,)=0.993。实验在加拿大多伦多大学宇航研究院的高超音速炮风洞里完成。炮风洞喷管出口气流特性是:(空气)自由流总压比_(t,∞)=25.5MPa,总温T_(t,∞)=1000K;马赫数M_∞=8.30;自由流静压p_(s,∞)=2.13kPa;雷诺数R_e=3.2×10~7。以探针直径D为基准的R_(e,D)=34,000～52,800。这种探针己被用于“管内高超音速流场发展实验研究”中了。     

Study of thermo-fluidic characteristics for geometric-anisotropy Kagome truss-cored lattice

The aim of this paper is to provide a comprehensive comparison of the thermal insulation and heat transfer performance for Kagome truss-cored lattice along two perpendicular orientations OA and OB. Three test conditions are conducted under forced air convection for the titanium sandwich panel fabricated by 3 D printing technology. The thermo-fluidic characteristics are further explored by numerical simulation to reveal the underlying mechanisms of heat transfer enhancement.The results indicate that the orientation OB exhibits better thermal insulation than orientation OA under the identical temperature loading, while the latter outperforms the former by up to 20% higher overall heat transfer performance. In particular, the endwalls and lattice core in orientation OA achieve 9.7% and 22.5% higher area-averaged Nusselt number respectively than that in orientation OB for a given Reynolds number. The heat transfer superiority of orientation OA comes from the unique topology which induces the large scale spiral primary flows, facilitating the heat exchange between the cooling air and the surfaces of sandwich panel. However, the complex flow mixing leads to a maximum of 20% higher friction factor in orientation OA than that in orientation OB.     

低空无人飞艇压力控制系统的设计与实现

介绍了一种以C8051F120单片机为核心设计的低空无人飞艇压力控制系统,详细给出了系统的总体架构;着重说明了主要功能模块的电路设计和固件的程序设计.地面测试和飞行试验表明该压力控制系统性能稳定,能满足低空飞艇飞行中压力控制的要求.     

On the stabilizing effect of Solar Radiation Pressure in the Earth-Moon system

Solar sails change the natural dynamics of systems: Trajectories that are driven by gravitational forces can be displaced and changed because of the effect of Solar Radiation Pressure (SRP). Moreover, if the lightness number of the sail is large enough, the instability of certain orbits can be diminished and even removed. In this paper we modify two models for the motion of a probe in the Earth-Moon system that include the effect of Sun’s gravity to take also into account the effect of SRP. These models, the Bicircular Problem (BCP) and the Quasi-Bicircular Problem (QBCP), are periodic perturbations of the Earth-Moon Restricted Three Body Problem (RTBP). The models are modified to consider the effect of the SRP upon a solar sail. We provide examples of periodic orbits that are stabilized (or made less unstable) due to the effect of SRP.     

JJG 860-2015《压力传感器(静态)检定规程》浅析

介绍了JJG 860-2015《压力传感器(静态)检定规程》的主要变化,就检定设备的选择、特殊压力传感器的检定方法等对规程进行浅析,结合测试实例论述了新增传感器零点漂移和周期稳定性两个性能指标的必要性,并对规程的进一步完善提出了建议。     

Using altimetry and seafloor pressure data to estimate vertical deformation offshore: Vanuatu case study

Measuring ground deformation underwater is essential for understanding Earth processes at many scales. One important example is subduction zones, which can generate devastating earthquakes and tsunamis, and where the most important deformation signal related to plate locking is usually offshore. We present an improved method for making offshore vertical deformation measurements, that involve combining tide gauge and altimetry data. We present data from two offshore sites located on either side of the plate interface at the New Hebrides subduction zone, where the Australian plate subducts beneath the North Fiji basin. These two sites have been equipped with pressure gauges since 1999, to extend an on-land GPS network across the plate interface. The pressure series measured at both sites show that Wusi Bank, located on the over-riding plate, subsides by 11 ± 4 mm/yr with respect to Sabine Bank, which is located on the down-going plate. By combining water depths derived from the on-bottom pressure data with sea surface heights derived from altimetry data, we determine variations of seafloor heights in a global reference frame. Using altimetry data from TOPEX/Poseidon, Jason-1, Jason-2 and Envisat missions, we find that the vertical motion at Sabine Bank is close to zero and that Wusi Bank subsides by at least 3 mm/yr and probably at most 11 mm/yr.