航天器不同舱段一次母线接地设计

随着多舱段航天器的发展和航天器上供配电设备的增多,设备之间的相互干扰问题日益突出。文章对不同舱段的电源接地方式进行分析研究,给出航天器不同舱段的一次母线接地设计方案及实际应用案例,为后续多舱段接地设计提供经验参考。     

城市供水调度系统的现状与发展

简述国内城市供水调度系统的应用现状，指出在实际应用中存在的问题和解决的途径。并介绍了系统几年来的发展及今后的趋势。     

电位器质量与产品部件颤抖的关系分析

分析讨论电位器的质量与产品部件发生颤抖的关系,为排除产品故障提供依据。由产品故障的再现试验和对电位器结构及工作环境的分析,认为电阻元件表面粗糙是引起产品部件发生颤抖的主要因素,当电刷在粗糙的电阻元件表面上快速运动时,触点发生弹跳和接触不良,电位器的输出电压发生掉电,导致控制电路发出不正常的控制信号,产品部件随之发生颤抖故障。通过对电位器的质量、工作过程及产品部件运动特点的分析,为排除产品故障提供了理论依据。     

"神舟"号载人飞船电源分系统的研制

根据载人航天的特点和飞船电源系统的任务,研制了"神舟"号载人飞船的电源分系统,并介绍了该分系统及其技术的特点,以及采用的安全性和可靠性技术措施。数次飞行试验结果表明,所设计的电源分系统性完全满足载人航天工程的要求。     

子信道功率控制在Ka频段DT-OFDM系统中的应用研究

文章提出了子信道功率控制在Ka频段卫星通信信道DT—OFDM系统中应用的方案,给出了系统模型的组成和差分软检测方法,并根据系统模型进行了仿真。仿真结果表明应用子信道功率控制的DT—OFDM方案与传统的CC．OFDM方式相比,在10。误码率时能得到4dB的信噪比增益。     

空间电源功率调节技术综述

介绍了空间电源功率调节装置(PCU)的分流调节器(SR),蓄电池的充电控制器(BCR)、放电控制器(BDR)和主误差放大器(MEA)的原理和技术现状。阐述了顺序开关分流调节(S3R)、混合型调节和顺序开关分流串联调节(S4R)三种基本拓扑的工作原理,并对三者进行了性能比较,认为S4R是目前最先进的调节技术。讨论了功率调节装置模块化、智能化和小型化的发展趋势并分析了大功率的功率调节装置研制难点。     

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures (ECCM) scheme combating against deceptive electronic counter measure (ECM) techniques.An adaptive detector exploiting generalized likelihood ratio test (GRLT) criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform (FrFT) domain.First,the generating mechanism of spurious frequencies is analyzed based on the Volterra serial.The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second,a modified adaptive beamformer orthogonal rejection test (ABORT) like detector in closed form is built.The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data.This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality,which is essential for the ABORT detectors.The expansion to radar network is discussed as a special case at the final part of this paper.Numerical simulations demonstrate the effectiveness of the proposed method.     

Stationary non-Gaussian random vibration control: A review

This paper presents a review of the various methods for the stationary non-Gaussian random vibration control. Random vibration tests can be divided, according to the number of exciters, in single-shaker tests and multiple-shaker tests. In the stationary non-Gaussian random vibration test, the time and frequency domain characteristics of the responses should be controlled independently and simultaneously. Skewness and kurtosis are usually selected as the non-Gaussian time control references (targets) while power spectral density is the frequency domain control procedure before it recalls the concepts of non-Gaussianity. Then, the generation of a one frame stationary non-Gaussian random signal for both the single and multiple shakers are reviewed. The commonly used methods for the single non-Gaussian random signal generation in the random vibration test are memoryless nonlinear transformation, phase modification and Filtered Poisson process. For the multiple-shaker case, the sequential phase modification and memoryless nonlinear transformation are used to generate one frame coupled multi-channel non-Gaussian random signal. In order to obtain a stationary and consecutive dynamic input, the time domain randomization procedure is introduced with high computational efficiency and its influences on the skewness and kurtosis are analyzed. Finally, two existing problems in the non-Gaussian random vibration control are addressed.     

飞机电源系统故障诊断方法综述及发展趋势

飞机电源系统是机上一切用电设备的电能来源,其安全性与可靠性至关重要。在环保和高效发展需求的背景下,现代航空工业正在推进以电能为核心的多电/全电飞机技术的研究和应用。电驱动装置和电力电子器件的广泛使用导致飞机电源系统结构的复杂化,对飞机的可靠性、安全性、测试性和维修性提出了更高的要求,研究飞机电源系统的故障诊断技术具有重要意义。首先介绍了飞机电源系统的组成结构和各自功能,概述了飞机电源系统的发展历程,对比了国内外典型电源系统的特征,总结了飞机电源系统中的主要故障模式、故障特点和失效原因,并提出了一种飞机电源健康管理系统的设计架构,然后综述了国内外基于模型和基于数据的故障诊断方法研究进展,从准确度、数据需求量、适用性和实现难易程度等方面评述了各类诊断方法的特点,最后指出了飞机电源系统故障诊断技术面临的挑战和发展趋势。     

太阳电池阵列模拟器计量测试方法研究

对太阳电池阵列模拟器(SAS)的设计原理和技术要求进行了分析,并根据分析结果对太阳电池阵列模拟器计量测试方法进行了研究。