自适应光学技术补偿镜面温度及自重变形研究

论述了在星载高分辨率相机上采用自适应光学技术的必要性;介绍了应用自适应光学技术补偿镜面温度及自重变形的实验原理,进行了计算机模拟计算,并与实验结果进行比较。实验用一块平面反射镜作为缩比模型,应用６１单元自适应光学系统对其进行了闭环校正实验,分析了泽尼克多项式所对应的像差的校正效果。     

树脂基碳纤维复合材料的热物理性能之一——热膨胀

本文讨论了碳纤维复合材料的热膨胀机理及热膨胀系数的理论计算,总结归纳了CFRP材料中纤维排布方式、温度等因素对热膨胀系数的影响,最后给出了一些CFRP材料的热膨胀系数。     

高超声速条件下星光传输模拟方法与仿真

以高超声速飞行器为研究对象,建立了高速流场下的星光传输模拟仿真方法,定性、定量地研究平台气动光学效应对星光导航的影响。采用基于k-ω/SST两方程湍流模型的雷诺平均法计算星敏感器安装在飞行器不同位置处（头部、中部和尾部）的外流场密度分布,进而得到流场的空间折射率分布。在此基础上,利用几何光学法计算星光由高速层流流场引起的光程差、点扩散函数、像偏移等光学传输效应,得出经过层流流场的星光降晰图。同时运用统计光学理论计算高速湍流流场引起的星光出瞳面的波像差、密度均方差、相位均方差、Strehl比等光学传输效应,得出经过湍流流场的星光降晰图。仿真结果与理论分析吻合,从而为研究星光在高超声速流场中传输的机理提供了可靠的技术手段。     

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

航天器分离面物理嵌合机理及防护方案

在某航天器研制过程中,发现了分离面镀膜后因非冷焊因素导致不能分离的现象。为探究该现象的产生机理、影响因素和防护方案,将铝合金试片表面分别进行不处理、本色阳极氧化处理、涂覆二硫化钼处理、光亮镀金处理和光亮阳极氧化处理后,两两配合加压,高真空条件下静置一段时间后,在常温常压条件下进行分离试验,如果试片未分离,重新采用新试片在变温常压条件下静置一段时间后,进行分离试验,分析各试片表面形貌变化和元素转移等情况。试验发现未分离试片因对接面上存在大量细小的凹凸纹路彼此机械咬合引起不能分离,试片镀膜硬度和表面粗糙度是产生物理嵌合的直接原因。从而,提出了航天器无相对运动的分离面需选用硬度较大、粗糙程度较低镀层的防护措施,并通过试验进行了验证。     

基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩

基于干涉多光谱图像特点和应用环境要求,提出一种基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩算法。编码端通过关键帧预测出边信息帧,然后联合估计的边信息帧和插值分布的概率模型在编码端进行比特平面码率估计,最后采用基于率失真提升的感兴趣区域编码,调整图像不同区域的率失真斜率来进行更合理的码率分配。实验结果表明,该算法比传统算法更好地保护了多光谱图像的光谱信息。在不同压缩比的情况下,这种编码方式在干涉多光谱图像压缩系统中可获得较好的效果,算法复杂度低。     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

Passive inter-modulation scattering analysis of reflector considering contact nonlinearity

 Passive inter-modulation (PIM) is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform (FFT), we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.     

卫星星体对多波束天线的散射影响分析

地球静止轨道(GEO)移动通信卫星,多采用大反射面天线及多馈源组成的空间可展开多波束天线系统,具有更高的天线增益,并提高了整体系统性能,但由于过于庞大的天线反射面和馈源阵列,在整星结构构型布局中难免由于卫星星体或其它机构部件的存在而造成散射.文章主要针对GEO移动通信卫星星体对多波束天线散射影响问题,利用仿真分析软件,...     

一种铍合金材料的结构和性能

对国外某型号飞机所用的铍合金刹车材料进行了密度测试、结构观察、化学元素分析、力学、物理和摩擦性能表征,并与C/C、C/SiC复合材料和粉末冶金材料的相关性能作了对比,结果表明,粉末冶金铍合金材料密度低,力学和摩擦性能优异,是一种很有发展前途的刹车材料.