卫星导航有源接收天线噪声温度测量

卫星导航有源接收天线的噪声温度是导航接收系统的关键技术指标之一。针对卫星导航有源天线总体噪声温度无法测量的问题，研制了两台口面型噪声源，口面噪声源主要由辐射体、辐射体物理温度控制和温度测量仪等组成。两个口面噪声源在L和S波段分别提供高低温标准噪声温度，采用Y系数测量方法测量有源接收天线的总体天线噪声温度。测量了某卫星导航有源天线的总噪声温度，在(1.19～1.29) GHz的频率范围内，中心频率1.24 GHz上噪声温度测量结果为206 K，但是在1.266 GHz频率点上噪声温度测量大于4 000 K，说明天线与滤波器之间、滤波器与放大器之间存在设计问题或其它问题，体现出测量有源天线噪声温度的必要性。     

Conceptual design and analysis of legged landers with orientation capability

The lander with orientation capability is of fundamental importance for the “Returning” mission because its body can be the base with a suitable launching angle for the ascender lifting off. This paper proposes the conceptual design and verification of Landers with Orientation Capability (LOCs). Firstly, the topological composition of the lander is analyzed and expressed in the form of Lie group, which provides the fundamental principle for the type synthesis of LOCs. Then, the type synthesis approach for designing LOCs is proposed, which includes designing the Equivalent Parallel Mechanism (EPM) and the auxiliary limbs. Numerous mechanisms of LOCs with two-dimensional rotational motions are obtained based on the type synthesis approach by developing and combining the EPMs and auxiliary limbs. Afterward, kinematics and Jacobian matrix of a typical legged lander are developed, the workspace is analyzed, singularity configurations are analyzed based on the wrench graph method, and finally, the orientation capability is analyzed. The pitch and yaw angle reach 17.5°, considering the permissible range of joints. The proposed types of LOCs offer potential candidate for the “Returning” mission of the exploration mission.     

Enhancement on parallel unstructured overset grid method for complex aerospace engineering applications

In the present study, an efficient overset grid method by means of parallel implicit hole-cutting is proposed for the sake of simulating unsteady flows in aerospace engineering involving multiple bodies in relative movement. In view of the degraded computational efficiency and robustness for conventional overset grid assembly, several innovative techniques are developed within the overset grid assembly process, viz., a bookkeeping alternative digital tree method to speed up the donor-cell search...     

航空公司欧美国际航线运营持续时间生存分析

航空公司航线进入后的运营可持续性直接影响其盈利水平。基于生存分析方法探究影响航线运营持续时间的因素，从成本和供给特征、航线和机场特征、市场结构特征、航司合作类型和时间异质性5个方面选取关键因素，以自由化程度较高的欧美跨大西洋市场为实证对象，研究年份为2003—2021共19年，采用Kaplan-Meier方法进行单因素分析，并构建威布尔参数生存模型分析影响因素与航线运营持续时间的定量关系。结果表明：（1）航司在欧美航线的平均运营持续时间为5年，持续运营超过10年的航线占比为16%;(2)距离、航司投入总运力、航线结构、端点机场类型和竞争程度、航司类型及所属区域和联盟对航司航线运营持续时间具有显著影响；（3）联盟和代码共享独立变量和交互变量均对航线生存产生显著影响，星空和天合联盟成员的航线运营持续时间更长，联盟成员在代码共享合作时承担不同承运人角色对航线退出风险影响存在显著差异。     

内并联型进气道模态转换过程中流道间干扰特性研究

针对组合动力进气道模态转换过程中存在的流道间干扰现象,采用数值模拟方法对一典型内并联型进气道模态转换过程中高/低速流道间的干扰特性展开了深入研究。结果表明：在模态转换过程中,当低速流道结尾激波位于低速流道内部时,高速流道节流至一定程度都将对低速流道形成干扰。该干扰现象出现后,高/低速流道的流动耦合,两流道的流量分配也随之发生变化,甚至导致了进气道流场的失稳。仅当β/α=0.25时,高/低速流道间的干扰造成了进气道流场的失稳且失稳后的振荡流场会先后出现两个不同的发展时期：前一时期的振荡流场的振幅较大但频率较低,约为335Hz；后一时期的振荡流场的振幅较小但频率较高,约为880Hz。