发动机生产加工中质量控制界限的优化

以两类错误损失费用最小为目标,对现行发动机零组件加工质量控制中以x±3σ作为控制图控制界限的方法进行了改进,建立了确定最佳控制界限(Kσ)的数学模型与最优控制界限(K)的算式。通过实例对优化结果和现行“x±3σ”方法的结果进行了比较和分析,进一步说明了该方法的优越性。     

一类中立型高维周期微分系统的周期解

文中利用指数型二分法,结合不动点定理考虑如下形式的中立型高维周期系统: 苦d/dt[x(t)+cx1]=A(t,x(t))x(t)+f(t,x1),得到其T-周期解存在的充分性条件,所得结论改进或推广了早先文献中周期解存在的相应结论。     

Research on vibration suppression of a mistuned blisk by a piezoelectric network

The work aims to provide a further investigation of the dynamic characteristics of an integral bladed disk(also called ‘blisk') with a Parallel Piezoelectric Network(PPN). The PPN is constructed by parallelly interconnecting the piezoelectric patches distributed in the blisk. Two kinds of PPN are considered, namely mono-periodic PPN and bi-periodic PPN. The former has a piezoelectric patch in each sector, and the later has one patch every few sectors. The vibration suppression performance of both kinds of PPN has been studied through modal analysis, forced response analysis, and statistical analysis. The research results turn out that the PPN will only affect mechanical frequencies near the electrical frequency clusters slightly, and the bi-periodic PPN will make the nodal diameter spectrum of the modes more complex, but the amplitude corresponding to the new nodal diameter component is much smaller than that of the nodal diameter component corresponding to the mono-periodic system. The mechanical coupling between the blades and the disk plays an important role in the damping effect of the PPN, and it should be paid attention to in applications. The mono-periodic PPN can effectively suppress the amplitude magnification of the forced response induced by the mistuning of the blisk; meanwhile, it can mitigate the vibration localization of the mistuned electromechanical system. If piezoelectric patches are set only in part of the sectors, the bi-periodic PPN still has a vibration suppression ability, but the effect is related to the number and spatial distribution of the piezoelectric patches.     

结合TEC的泵驱两相温控系统的空间应用

为满足天舟一号货运飞船(T Z1)蒸发冷凝科学实验的控温需求，采用半导体制冷片(TEC)和泵驱两相回路结合的控温系统实现了冷凝台-5~40 ℃(±0.2 ℃)的控温要求。对TEC和平行流换热器进行了研究，结果表明该系统能够满足环境温度等于30 ℃工况下的制冷和散热要求。测试结果表明，平行流换热器在地面和在轨的换热相当，说明重力的影响几乎可以忽略。     

Singularity radius gradient-based rapid singularity-escape steering law for SGCMGs

In order to visualize singularity of SGCMGs in gimbal angle space, a novel continuous bounded singularity parameter--Singularity Radius, whose sign can distinctly determine singularity type, is proposed. Then a rapid singularity-escape steering law is proposed basing on gradient of Singularity Radius and residual base vector to drive the SGCMG system to neighboring singular boundary, and quickly escape elliptic singularities. Finally, simulation results on Pyramid-type and skew-type configuration demonstrate the effectiveness and rapidness of the proposed steering law.     

Parallel algorithm and its convergence of spatial domain decomposition of discrete ordinates method for solving radiation heat transfer problem

To improve the computational efficiency and hold calculation accuracy at the same time,we study the parallel computation for radiation heat transfer. In this paper, the discrete ordinates method(DOM) and the spatial domain decomposition parallelization(DDP) are combined by message passing interface(MPI) language. The DDP–DOM computation of the radiation heat transfer within the rectangular furnace is described. When the result of DDP–DOM along one-dimensional direction is compared with that along multi-dimensional directions, it is found that the result of the latter one has higher precision without considering the medium scattering. Meanwhile, an in-depth study of the convergence of DDP–DOM for radiation heat transfer is made. Analyzing the cause of the weak convergence, we relate the total number of iteration steps when the convergence is obtained to the number of sub-domains. When we decompose the spatial domain along one-,two- and three-dimensional directions, different linear relationships between the number of total iteration steps and the number of sub-domains will be possessed separately, then several equations are developed to show the relationships. Using the equations, some phenomena in DDP–DOM can be made clear easily. At the same time, the correctness of the equations is verified.     

汉英旅游文本主要差异及其翻译

提高旅游资料的翻译质量能推进中国旅游业的发展。通过分析中英文旅游资料各自的文本类型特点以及中西文化的差异,本文提出了若干个相应的翻译原则和技巧。这些技巧和原则包括:删减与调整、增词法、类比法、解释法。娴熟地运用这些技巧可以提高翻译质量从而使不同的文化得到更好的交流和沟通。     

高校会计专业实践教学初探

作为一个高等院校,能否为国家的经济建设和社会的发展需要培养出合格的应用型人才,是这个学校是否具有竞争力的重要标志之一。高校对应用型人才的培养,应体现学术、技术和职业的有效结合。培养会计学专业的应用型人才,需要加大实践教学的力度。本文针对目前会计学专业实践教学存在的问题进行了分析,并进一步提出了开展实践教学形式的初步设想。     

地形跟随系统的并行预测控制方法

本文基于脉动（Ｓｙｓｔｏｌｉｃ）阵列结构，提出了一种基于状态空间模型预测控制的并行算法，这种算法可以通过阵列结构并行实现，以满足地形跟随系统的实时控制参数合成的要求     

基于约束线图的超导重力梯度敏感结构型综合

基于约束线图对超导重力梯度敏感结构进行型综合,分析轴向分量与交叉分量单独敏感的结构自由度与约束线图,并结合超导重力梯度测量应用提出两分量同时敏感的结构,利用自由度与约束线图确定约束类型,等效为柔性圆柱副,并选择柔性元件进行并联机构形式的布局.在型综合的基础上,通过模态仿真对比,得到两端与柔性球铰联接的刚性杆结构适于在两分量敏感结构中应用的结论.刚度特性仿真分析结果表明两分量敏感结构具有设计运动方向刚度小、寄生运动方向刚度大、运动耦合小的特点,适于在超导重力梯度测量系统中应用.