正确认识山农信道容量定理

山农信道容量定理公式中的信道带宽恒为信源所发出的消息信号的带宽 ,是信道带宽的理论最小极限 ;它不同于现代通信工程中传输已调制信号时所需要的信道带宽。这是本文所证明的基本结论。这一结论将限制信道容量定理的普适性和实用性。     

N2O-C2H2火焰原子吸收光谱法测定纯镍中硅含量

为简化纯镍中硅含量的测定过程,提高测量精度,研究了一种N2O-C2H2火焰原子吸收光谱法用于检测。介绍了方法的原理、工作参数和测定条件,并确定最佳工作条件,讨论了燃烧温度、共存离子等干扰因素的影响。实验结果表明,该法的灵敏度高、干扰小、选择性和重现性好,操作简单,分析周期短。其测定结果的相对标准偏差均小于1.0%,标准加入回收率大于97.0%(样本数n=6),可满足实验室仪器分析质量与控制的要求。     

《C++程序设计》课程教学方法探析

《C 程序设计》课程重点是培养学生掌握面向对象程序设计的基本思想和方法,难点是如何引导学生突破传统的思维方式,形成以面向对象的思维方式,分析问题、解决问题。本文从教学方法、教学手段的角度出发,谈谈在教学上的一些经验和体会,以提高C 课程教学质量和教学效果。     

2D碳/碳复合材料CVI过程的数值模拟研究

本文根据３Ｄ碳／碳复合材料的结构特征及ＣＶＩ工艺的特点建立了孔隙模型和动力学模型，并利用该模型对其ＣＶＩ过程进行了模拟与分析。模拟结果与实验结果的对比表明该数学模型是合理的。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

建立空分中N2O的检测方法,确保设备安全运行

介绍了建立N2O检测方法原由,操作变量的选优及对空分安全生产的建议.     

模糊信息环境下的综合评判

 本文针对各种模糊信息环境下的综合评判问题,即多准则决策中的离散型决策问题,提出了3种模糊综合评判模型及模型在各种不同的决策需要下的具体的实现方法。试图解决在模糊权值或模糊判定或权值及判定均为模糊的环境下,以及不同的决策需要时的实际的综合评判问题。     

High Excitation ISM and Gas

An overview is given of ISO results on regions of high excitation ISM and gas, i.e. HII regions, the Galactic Centre and Supernova Remnants. IR emission due to fine-structure lines, molecular hydrogen, silicates, polycyclic aromatic hydrocarbons and dust are summarised, their diagnostic capabilities illustrated and their implications highlighted. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

利用非交错对称矩阵构造Cartesian认证码

利用特征为2的有限域上非交错对称矩阵构造了一个Cartesian认证码，并计算出其参数。进而，假定编码规则按照均匀的概率分布所选取，计算出了该码被模仿攻击成功的最大概率只和被替换攻击成功的最大概率Ps。     

Ti2AlNb基合金的ISM熔炼研究

讨论了Ti2AlNb基合金的熔炼特点,概括介绍了真空水冷铜坩埚感应凝壳熔炼的设备结构原理和工艺技术,结合Ti2AlNb基合金的熔炼实践,研究了合金元素的加入形式、熔炼室真空度对合金铸锭的均匀性以及合金中Al挥发烧损的影响规律。结果表明:采用水冷铜坩埚真空感应凝壳熔炼Ti2AlNb基合金,合金铸锭成分均匀性很好,随着熔炼工艺的不同,Al挥发烧损在5％～10％（质量分数）之间。