Nk-投射半模及其性质

主要引进了Nκ-投射半模的概念，并结合环中投射模与半环中投射半模的性质，得到了关于Nκ-投射半模的一些性质，这些性质是投射模与投射半模性质的推广。     

数字电视大范围载波频偏快速捕获算法

根据中国数字电视地面传输标准帧结构特点,提出了一种大范围频率偏差捕获方法.该算法利用PN(Pseudo Noise)序列移位相加后仍为PN序列这一特征,通过帧头PN序列与本地PN序列的差分互相关得到待求的频偏值,然后利用BLUE(Best Linear Unbiased Estimator)方法,在不损失频偏精度的前提下扩大频偏估计范围.该算法能在帧同步前快速捕获大范围频偏,为可靠实现帧同步以及频偏跟踪过程提供了必要条件.仿真结果表明,相对于传统的差分互相关算法,该算法能在一个帧头时间内快速锁定频偏,频偏估计范围扩大了H倍且频偏精度不变.     

进近过程中的排序和冲突解决算法研究

研究了终端区飞机进近过程中排序和冲突解决的调度算法.借鉴美国研制的最后进近间隔工具(FAST)中的排序、冲突预防和解决方法,讨论了这些方法在终端区飞机进近过程中将排序和冲突解决综合实现问题,分别给出了在飞行段和汇聚过程中排序和冲突解决的算法模型.仿真结果表明该模型能有效地解决最后进近过程中的排序和冲突问题,使到达飞机流快速有序地进入机场着陆.     

用于定位星座选择的组合计数算法设计

研究了卫星定位系统接收机中的数据处理技术。首先针对定位星座的优选进行了阐述，指出星座优选实质上为一组合优化问题；在深入分析的基础上，设计了一种基于ｍ序列的组合计数算法，利用该算法进行了仿真计算，并分析了所得结果；最后给出了结论。     

多序列激光阴影成像技术研究及应用

为获取超高速碰撞过程中弹丸的飞行姿态及碰撞所产生的碎片云特性,开展了多序列激光阴影成像技术研究。利用多光源空间分离、偏振分光、光束角放大和补偿滤光等技术解决了单色光带来的衍射和干涉噪声以及碰撞瞬间强烈的自发光干扰问题,并先后在碰撞靶上建立了2序列、4序列和8序列激光阴影成像系统。该系统可以获得最小间隔1μs、曝光时间10ns、像素1000万的多个不同时刻的超高速瞬态变化过程图像,并在超高速碰撞靶试验中得到应用,获得了2～7km/s 撞击速度时碎片云的多序列阴影图像,该序列图像清晰地描述了碎片云的轮廓发展变化过程。该技术以低成本的方式实现了超高速摄影机的功能,满足目前碰撞试验粒子的飞行姿态及碎片云显示需要,并可以应用于其它超高速瞬态过程测量及流场结构显示。     

Analysis of optimal initial glide conditions for hypersonic glide vehicles

Hypersonic glide vehicles （HGVs） are launched by a solid booster and glide through the atmosphere at high speeds. HGVs will be important means for rapid long-range delivery in the future. Given that the glide is unpowered, the initial glide conditions （IGCs） are crucial for flight. This paper aims to find the optimal IGCs to improve the maneuverability and decrease the con- straints of HGVs. By considering the IGCs as experiment factors, we design an orthogonal table with three factors that have five levels each by using the orthogonal experimental design method. Thereafter, we apply the Gauss pseudospectral method to perform glide trajectory optimization by using each test of the orthogonal table as the initial condition. Based on the analytic hierarchy process, an integrated indicator is established to evaluate the IGCs, which synthesizes the indexes of the maneuverability and constraints. The integrated indicator is calculated from the trajectory opti- mization results. Finally, optimal IGCs and valuable conclusions are obtained by using range anal- ysis, variance analysis, and regression analysis on the integrated indicator.     

某型发动机起动电气控制系统检测设备研制

针对发动机系统线束检查的要求,发动机起动电气控制系统检测设备使用分布式的线束测试控制器实现线束的自动快速测试。针对发动机系统起动逻辑和时序检查的要求,检测设备模拟发动机起动条件给出激励信号,采集发动机的输出信号,判断起动逻辑和时序是否正确。检测设备为保护系统安全,采取许多安全性设计方法。检测设备的软件具有实时测试、数据回放、测试通道选择等多种功能。检测设备的设计思想已经通过现场联机测试得到验证。     

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

The elliptical cross-section spiral equal-channel extrusion (ECSEE) process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 (45) is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained: u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.     

Multi-parameter optimization of machining impeller surface based on the on-machine measuring technique

Selecting the optimal machining parameters for impeller surface is a challenging task in the automatic manufacturing industry, due to its free-form surface and deep-crooked flow channel. Existing experimental methods require lots of machining experiments and off-line tests, which may lead to high machining cost and low efficiency. This paper proposes a novel method of machining parameters optimization for an impeller based on the on-machine measuring technique. The absolute average error and standard deviation of the measured points are used to define the grey relational grade for reconstructing the objective function, and the complex problem of multi-objective optimization is simplified into a problem of single-objective optimization. Then, by comparing the values of the defined grey relational grade in a designed orthogonal experiment, the optimal combination of the machining parameters is obtained. The experiment-solving process of the objective function corresponds to the minimization of the used errors, which is advantageous to reducing the machining error. The proposed method is efficient and low-cost, since it does not require re-clamping the workpiece for off-line tests. Its effectiveness is verified by an on-machine inspection experiment of the impeller blade.     

基于正交分解法的非平稳随机振动响应计算

为高效地获得非平稳随机振动响应的高精度结果,对过滤白噪声非平稳激励信号用精确积分法获得了 K L 分解的精确向量,并对其进行了分析。单自由度和多自由度仿真结果表明, 用较少量的K\|L向量即可满足精度的要求,尤其对峰值的把握较准确。在二自由度的非线性杜芬剪切系统中利用基于能量的等价线性化方法与正交展开方法进行迭代计算并与蒙特卡洛方法进行比较,仿真结果验证了方法的精确性。