基于三维最小二乘方法的空间直线度误差评定

空间直线度误差是评定机械产品精度的一项重要指标,实际工程中对空间直线度误差评定算法的精度要求越来越高.为了准确评定空间直线度误差,参照国家标准(GB/T 11336—2004),采用三维最小二乘方法建立了空间直线拟合的数学模型,并给出了该数学模型的精确解.基于最小二乘拟合中线,采用空间投影、坐标变换和格点法求得最小二乘中线包容圆柱面直径.采用数值算例验证了新方法的有效性.提出的空间直线度误差评定方法精度高、鲁棒性好且易于编程实现.     

The effect of spatial truncation error on variance of gravity anomalies derived from inversion of satellite orbital and gradiometric data

The spatial truncation error (STE) is a significant systematic error in the integral inversion of satellite gradiometric and orbital data to gravity anomalies at sea level. In order to reduce the effect of STE, a larger area than the desired one is considered in the inversion process, but the anomalies located in its central part are selected as the final results. The STE influences the variance of the results as well because the residual vector, which is contaminated with STE, is used for its estimation. The situation is even more complicated in variance component estimation because of its iterative nature. In this paper, we present a strategy to reduce the effect of STE on the a posteriori   variance factor and the variance components for inversion of satellite orbital and gradiometric data to gravity anomalies at sea level. The idea is to define two windowing matrices for reducing this error from the estimated residuals and anomalies. Our simulation studies over Fennoscandia show that the differences between the 0.5°×0.5°$0.5°\times 0.5°$ gravity anomalies obtained from orbital data and an existing gravity model have standard deviation (STD) and root mean squared error (RMSE) of 10.9 and 12.1 mGal, respectively, and those obtained from gradiometric data have 7.9 and 10.1 in the same units. In the case that they are combined using windowed variance components the STD and RMSE become 6.1 and 8.4 mGal. Also, the mean value of the estimated RMSE after using the windowed variances is in agreement with the RMSE of the differences between the estimated anomalies and those obtained from the gravity model.     

基于Contourlet与HIS变换的SAR与多光谱影像融合方法

为了提高SAR影像的解译水平,本文利用Contourlet变换在影像表述上能够弥补小波变换不能有效捕捉二维空间实体的特点,提出了一种基于Contourlet与HIS变换的SAR与多光谱影像融合方法。实验选取了一组TM 多光谱影像与ERS-2 SAR影像进行融合研究,并将融合结果与基于HIS变换、DWT结合HIS变换融合方法的融合结果进行视觉比较与统计分析。结果表明,无论是目视比较还是统计分析,本文方法都很好的将SAR影像的空间细节与多光谱影像的色彩信息集成到了一起,显著地提高了SAR影像的解译水平,相对于基于HIS、DWT+HIS变换的融合方法获得了更好质量的融合影像。     

基于无奇异变换的卫星广播星历拟合算法

针对导航卫星轨道偏心率近似为0,致使卫星轨道的近地点角距定义模糊,在数据拟合过程中会导致法矩阵（H^TH）奇异的问题,本文提出基于无奇异变换的广播星历参数拟合算法,引入无奇异轨道根数代替经典开普勒根数,推导了空间目标位置矢量对基于无奇异轨道根数的广播星历参数偏导数矩阵,利用变换后的观测方程迭代拟合得到改进广播星历参数,再将结果归一化到基于开普勒根数的广播星历参数。最后利用仿真算例验证了所推公式和算法的合理性。     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

径向变体飞艇总体参数估算方法

为突破临近空间可操纵浮空器的关键技术难点,使可操纵浮空器往返地面至临近空间成为可能,提出了一种径向变体飞艇的总体参数估算方法,该方法基于阿基米德浮力定律和李式变体飞艇原理(Li-Style Transformable Airship Theory),通过艇体结构的径向变形来实现艇体截面积的自适与可控变化,控制飞艇容积变化以改变净升力大小,并使飞艇在容积变化中始终保持可操纵的气动外形,从而实现飞艇的升、降与驻空和飞行等控制.通过设计变形方案估算内气囊与外气囊尺寸,分析力学平衡与能源平衡估算飞艇长度.在拟定设计参数的基础上,给出了一种太阳能径向变体飞艇的总体设计方案,并通过设计实例验证了此方法的可行性与实用性.     

基于纹理的活动轮廓三维图像分割研究

对具高噪声和低对比度三维图像的识别和分割算法进行了研究。基于活动轮廓模型,用Gabor变换提取图像的纹理特征,根据统计学信息假设,通过偏微分方程水平集和窄带方法求解,获得较基本活动轮廓的算法分割更光滑精确的物体轮廓。实验结果表明:改进模型算法的效率和准确度达到预期效果。     

精密离心机误差对石英加速度计误差标定精度分析

分析了离心机各个误差源,用齐次变换法精确地计算了产生的向心加速度,给出了向心加速度、重力加速度和哥氏加速度在加速度计坐标系下的分量,推导了被试加速度计输入加速度的精确表达式。在给出石英摆式加速度计在精密离心机上标定时的误差模型的基础上,着重讨论了误差模型系数的计算值与离心机误差之间的关系。根据仿真结果找出了某些离心机误差对加速度计误差系数标定的影响关系,为按照加速度计的标定精度来确定离心机的精度打下了理论基础。     

全自动快换装置精准对接技术

当抢险救援机器人腕部的全自动快换装置(full-AQHCD)自动锁紧属具接口即下耦合件(LCP)时,要同步精准对接和自动接通下耦合件的液压管路,为此,分别提出了数字量测量条件下和模拟量测量条件下精准对接理论(PDT),分别用于指导产品阶段和样机阶段的生产。产品阶段的精准对接理论是:把全自动快换装置视为被动目标,把下耦合件视为主动目标;通过4个耦合点实现全自动快换装置与下耦合件的连接;通过测量分别建立被动目标坐标系(X_1O_1Y_1)、主动目标坐标系(X_2O_2Y_2)与精准对接坐标系(XOY)之间的位姿关系;将被动目标对接点X_1O_1Y_1坐标变换到XOY坐标,再变换到主动目标对接点X_2O_2Y_2坐标;根据主动目标对接点X_2O_2Y_2坐标对主动目标对接点进行调姿以实现精准对接被动目标对接点;最后固定主动目标对接点。样机阶段的精准对接理论是:把全自动快换装置视为被动目标,把下耦合件视为主动目标;不完工被动目标布线舱,从而暴露出工作舱类似扳手空间的操作空间;通过4个耦合点实现全自动快换装置与下耦合件的连接;另外布置油源,在操作空间中先"对接"液压管路,再"测量、调姿和最后固定"主动目标的液压管路;完工被动目标布线舱。对上述2种条件下理论进行了仿真验证。     

影响农杆菌介导草菇遗传转化的因素研究

以草菇Volvariella volvacea菌株V51为受体材料,用农杆菌Agrobacterium tumefaciens介导法转入抗冷冻蛋白基因(afp),探索不同的转化受体、农杆菌种类、乙酰丁香酮(AS)的浓度、共培养的温度、时间等因素对转化效率的影响,并采用PCR及Southern杂交检测afp基因是否整合到草菇的基因组中.结果表明:以D_(660 nm)为0.15的EHA105为侵染的农杆菌菌株,加入200 μmol/L AS进行预培养,侵染菌丝球后转入含有AS为200 μmol/L的IMA培养基上,28 ℃,共培养60 h为最佳转化条件.PCR与Southern杂交结果证明afp基因已整合到草菇的基因组中.