深空探测中多普勒的建模与应用

针对深空探测中的多普勒观测资料的单程和三程模式,分别给出了瞬时和积分的观测模型,双程多普勒观测模型是三程模式的一个特殊情况.通过比较瞬时和积分多普勒的差异,推断在积分周期取得足够小时,瞬时观测模型与积分模型是一致的.利用2009年8月份对火星探测器MEX的三程多普勒测轨资料的处理,检验了三程多普勒资料观测模型的正确性,利用约一个圈次8小时三程多普勒数据进行轨道计算,定轨结果与欧空局重建轨道位置差约几百米.     

偏置动量卫星东西位置保持策略优化方法

针对偏王动量卫星的特点,提出了一种偏置动量卫星东西位置保持策略优化方法.根据单自由度轮控系统的控制方式、角动量管理的控制方法,以及角动量管理对卫星轨道的影响,基于动量轮转速的变化建立了推力器喷气效率、轨道元素变化量计算模型,提出了可延长东西位置保持周期的轨道控制优化策略.实际轨控任务应用结果表明方法控制效果良好.     

在轨服务的相对运动耦合动力学建模与分析

研究在轨服务航天器逼近与捕获目标航天器的相对轨道姿态耦合动力学建模问题。考虑航天器姿态与对接位置的运动耦合,建立目标运行在任意轨道下的相对轨道姿态耦合动力学模型,并对模型中的运动耦合进行深入分析。设计一种非线性的输出反馈姿态控制律,将建立耦合动力学模型与CW方程进行仿真比较,验证轨道与姿态的运动耦合对两航天器对接点之间相对位置的运动影响。     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

The possibilities of polar meteorology,environmental remote sensing,communications and space weather applications from Artificial Lagrange Orbit

The ability to observe meteorological events in the polar regions of the Earth from satellite celebrated an anniversary, with the launch of TIROS-I in a pseudo-polar orbit on 1 April 1960. Yet, after 50 years, polar orbiting satellites are still the best view of the polar regions of the Earth. The luxuries of geostationary satellite orbit including rapid scan operations, feature tracking, and atmospheric motion vectors (or cloud drift winds), are enjoyed only by the middle and tropical latitudes or perhaps only cover the deep polar regions in the case of satellite derived winds from polar orbit. The prospect of a solar sailing satellite system in an Artificial Lagrange Orbit (ALO, also known as “pole sitters”) offers the opportunity for polar environmental remote sensing, communications, forecasting and space weather monitoring. While there are other orbital possibilities to achieve this goal, an ALO satellite system offers one of the best analogs to the geostationary satellite system for routine polar latitude observations.     

基于逐步回归的模型误差估计及在天基测控系统中的应用研究

以双星定位系统的天基测控技术为应用背景,提出了一种能够自适应估计模 型误差的轨道确定方法。详细推导了观测模型中的系统误差形态,建立了能表征实际特征的 部分线性轨道改进模型,并利用二阶段法和核函数估计法对混合误差进行补偿,在此基础上 对补偿模型进行逐步回归分析,从中提取动力学模型误差,从而抑制了动力学模型误差的影 响,提高了轨道改进的精度。在本文的仿真环境下,部分线性轨道改进法能够有效抑制混合 误差对定轨精度的影响,提高天基测控的轨道确定精度。     

编队飞行卫星群描述及摄动分析

定义了一组新的编队飞行卫星群相对运动描述参数 ,以及基于此的构型设计方法 ;并分析了地球非球形摄动对这组参数的影响 ,给出了为消除摄动长期影响所需的速度脉冲量 ,并对部分参数给出了减少摄动影响的设计方法     

利用星间测距的轨道计算方法

基于天基空间监测的技术背景,根据单位矢量法的基本原理,给出了一种在已知目标卫星轨道面的前提下仅利用星间测距对目标卫星进行轨道计算的算法,并对已知轨道面的不同误差大小对定轨精度的影响进行了分析。模拟计算表明,轨道倾角的误差对定轨的精度影响更大。     

一种有效提高超大偏心率轨道初轨确定精度的新方法

针对某型号航天器的运行轨道偏心率大、轨控结束后可用于初轨确定的测轨数据少的特点,提出了一种能有效提高超大偏心率短弧段初轨确定精度的新方法。该新方法将轨道改进的思想融入初轨计算方法中,使之既适用于各种偏心率轨道的初轨计算,也适用于各种偏心率轨道的长弧段、多圈、多站数据的轨道改进;解决了传统初轨确定方法超大偏心率轨道短弧段初轨确定误差偏大的问题。通过任务实测数据的检验,新方法适用于各种偏心率轨道,并且超大偏心率轨道的初轨确定精度明显优于传统方法。