故障树分析法在飞机客舱电气设备的排故应用

从故障树分析法的原理出发,对飞机客舱电气设备的故障原因进行分析,力求总结出一套专门针对飞机客舱故障解决有效方法.     

Self-similar flow of a rotating dusty gas behind the shock wave with increasing energy, conduction and radiation heat flux

A self-similar solution is obtained for one dimensional adiabatic flow behind a cylindrical shock wave propagating in a rotating dusty gas in presence of heat conduction and radiation heat flux with increasing energy. The dusty gas is assumed to be a mixture of non-ideal (or perfect) gas and small solid particles, in which solid particles are continuously distributed. It is assumed that the equilibrium flow-condition is maintained and variable energy input is continuously supplied by the piston (or inner expanding surface). The heat conduction is expressed in terms of Fourier’s law and the radiation is considered to be of the diffusion type for an optically thick grey gas model. The thermal conductivity K and the absorption coefficient α_R are assumed to vary with temperature only. In order to obtain the similarity solutions the initial density of the ambient medium is assumed to be constant and the angular velocity of the ambient medium is assumed to be decreasing as the distance from the axis increases. The effects of the variation of the heat transfer parameters and non-idealness of the gas in the mixture are investigated. The effects of an increase in (i) the mass concentration of solid particles in the mixture and (ii) the ratio of the density of solid particles to the initial density of the gas on the flow variables are also investigated.     

解析求解非线性相对运动的最优重构问题

椭圆轨道相对运动模型的线性化导致其在大尺度相对运动应用中精度不能满足需求。针对任意椭圆轨道上的大尺度航天器编队最优重构问题,提出一种基于椭圆轨道非线性相对运动模型的近似解析求解方法。首先通过变分法建立了非线性最优重构问题的数学模型;然后采用摄动法,以偏近点角为积分变量求得了不含特殊积分的解析开环最优控制,有效地避免了真近点角域下最优控制解所含有的特殊积分。仿真验证了所求最优控制的有效性和优越性,结果表明在相对运动尺度较大时,相比基于椭圆轨道线性化模型的最优控制,在燃耗保持相近的情况下,所求非线性控制有效地降低了重构误差。     

高动态卫星信号模拟器四阶相位合成器设计

为实现北斗二号导航系统卫星信号模拟器产生的信号对高动态条件下载体特征的准确表示,设计了一种四阶相位合成器。理论分析了由量化误差引起合成器各阶次状态间的误差传递效应,提出了非对称结构的优化设计,以平衡各阶次状态误差对最终相位状态的贡献权值;对非对称合成器进行合理的线性化近似,构建状态偏差平方和的目标函数,并给出了使其最小条件下求解各阶控制量最优值的方法。最后对高动态仿真信号进行捕获跟踪分析,结果表明该合成器合成信号的等效伪距和速度精度可分别达到10 -3 m和10 -4 m/s,优于低阶相位合成器的精度;并通过对比实验,验证了合成器量化位数对合成精度的影响。     

基于增量谐波平衡法的流量调节器非线性频率特性

针对多个状态变量、非线性关系复杂、方程刚性强的流量调节器系统,应用增量谐波平衡法研究了调节器在入口压力扰动下的强迫振荡问题,得到了系统周期解的解析表达式。通过与龙格库塔数值仿真结果相比较,验证了增量谐波平衡法应用于该系统的有效性,且计算量相对较小。进而在频域内探讨了流量调节器系统的非线性频响特性,结果表明,随着扰动振幅的增大,幅频响应在整个频率范围上都有所增大。计算结果可以用于评估线性化方法的误差范围。通过分析周期解的时均值与稳态值的差别,揭示了调节器受上游压力周期扰动时,其出口流量的时均值略低于稳态值的非线性特性。     

Exact analytic solution for the spin-up maneuver of an axially symmetric spacecraft

The problem of spinning-up an axially symmetric spacecraft subjected to an external torque constant in magnitude and parallel to the symmetry axis is considered. The existing exact analytic solution for an axially symmetric body is applied for the first time to this problem. The proposed solution is valid for any initial conditions of attitude and angular velocity and for any length of time and rotation amplitude. Furthermore, the proposed solution can be numerically evaluated up to any desired level of accuracy. Numerical experiments and comparison with an existing approximated solution and with the integration of the equations of motion are reported in the paper. Finally, a new approximated solution obtained from the exact one is introduced in this paper.     

基于多余观测分量的整周模糊度可靠性检验方法

针对常规模糊度检验三步法中存在的错误模糊度整数解漏检的情况,分析了错误整周模糊度、观测值残差及多余观测分量矩阵之间的内在联系,阐述了参考星变化对多余观测分量矩阵主对角线元素的影响,进而提出了一种基于多余观测分量的整周模糊度可靠性检验方法。该方法根据多余观测分量主对角线占优原则实现部分卫星的模糊度可靠性检验。对于多余观测分量主对角线不占优的卫星,利用多余观测分量绝对值最大的情况进行整周模糊度可靠性检验,从而完成所有卫星的模糊度可靠性检验。     

铝铜点焊的研究

提出了铝铜过渡接头的点焊新方法,用交流焊机点焊铝铜,解决了Al2O3氧化膜层的破碎问题。从而可利用热活化、压力、电磁搅拌力,使铝铜固溶,扩散和铝液面移动,完成铝铜点焊,获得比铝强度高的焊接接头,为铝代铜的运用提供了一种特殊的途径。     

用三站联测迭代法求飞行器位置的研究

针对用三站联测测距数据确定飞行器位置的迭代法作了一些探讨, 运用矩阵迭代理论、场论、张量分析的知识分析了迭代法的收敛特性, 并且给出了迭代收敛点处于地表以下的合理解释