一种非接触光外差轮廓仪

介绍了一种纳米级非接触超高精度光外差轮廓仪。该量仪是基于普通光路的外差干涉仪,两束具有微小频差的激光束照射到制件表面:其中一束光被会聚后作为测量光针扫瞄制件表面;另一束光则被用作参考光束。这两束光经反射后形成干涉,所得信号的光程差与制件表面高度变化成正比。量仪的横向分辩力小于2μm,垂直分辩力小于1nm。制件不需要进行大的调整。制件表面同时亦被作为测量参考面。经光电转换后,信号由微机处理,从而快速完成测量、计算、显示与打印各种参数与图形。     

攻角传感器的热失效分析与设计方案改进

根据压差归零式攻角传感器的工作原理、结构及工作条件，结合实际经验，分析了该传感器的主要失效因素，并重点分析了热失效问题；探讨了飞行中传感器探头加热器与环境之间的热交换情况。     

The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

夜气辉对天基光学碎片探测的影响分析

设计并完成了夜气辉背景下的天基碎片观测试验，获取了综合谱段的观测数据。基于观测数据进行夜气辉的辐射特性及其对天基碎片探测的影响分析。结果表明，夜气辉辐射随纬度和高度呈现一定的分布特点，这些特点均符合夜气辉的理论分布规律。在约90 km处辐射最强，亮度可达到单位积分时间每平方角秒近15星等，这对恒星及碎片提取概率影响较大，其中，13等星的提取概率仅为40.5%。     

Bayesian network-based extraction of lunar impact craters from optical images and DEM data

Impact craters are among the most noticeable geomorphological features on the planetary surface and yield significant information about terrain evolution and the history of the solar system. Thus, the recognition of impact craters is an important branch of modern planetary studies. Aiming at addressing problems associated with the insufficient and inaccurate detection of lunar impact craters, a decision fusion method within the Bayesian network (BN) framework is developed in this paper to handle multi-source information from both optical images and associated digital elevation model (DEM) data. First, we implement the edge-based method for efficiently searching crater candidates which are the image patches that can potentially contain impact craters. Secondly, the multi-source representations of an impact crater derived from both optical images and DEM data are proposed and constructed to quantitatively describe the two-dimensional (2D) and three-dimensional (3D) morphology, consisting of Histogram of Oriented Gradient (HOG), Histogram of Multi-scale Slope (HMS) and Histogram of Multi-scale Aspect (HMA). Finally, a BN-based framework integrates the multi-source representations of impact craters, which can provide reductant and complementary information, for distinguishing craters from non-craters. To evaluate the effectiveness and robustness of the proposed method, experiments were conducted on three lunar scenes using both orthoimages from the Lunar Reconnaissance Orbiter (LRO) and DEM data acquired by the Lunar Orbiter Laser Altimeter (LOLA). Experimental results demonstrate that integrating optical images with DEM data significantly decreases the number of false positives compared with using optical images alone, with F₁-score of 84.8% on average. Moreover, compared with other existing fusion methods, our proposed method was quite advantageous especially for the detection of small-scale craters with diameters less than 1000 m.     

Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

机载可见近红外成象光谱仪的设计

本文阐述了一种可行的面阵CCD 成象光谱仪的设计。它具有光谱范围宽(0.4μm～1.1μm)、高光谱分辨率(9.2nm)、密集的光谱波段数(76)、较大的地物扫描视场角(30°)等一系列引人注目的优点。     

考虑传感器动力学的变结构控制

研究了状态不可测系统的变结构控制问题。构造了系统的状态观测器。为了分析系统的抖振,计入了传感器（测量装置）的动力学。在建立了由对象、观测器和传感器组成的系统的动力学方程之后,研究了滑动模态的稳定性及其特性,并用趋近律方法构造出了变结构控制,还给出了关于抖振的又一解释。     

电子阻尼的增进——局部激励应变的补偿

分析了以压电陶瓷片为作动和测量元件,构成速度负反馈的闭环控制的“电子阻尼技术”之所以不能大幅度增加结构阻尼的原因。提出了“局部激励应变补偿”和把通常的微分负反馈改为低截止频率的惯性环节正反馈的控制新方案。压电悬臂梁的实验表明,它们能使结构模态阻尼比大幅提高。     

飞秒激光激励闪锌矿晶体产生太赫兹辐射的数学分析

基于飞秒激光激励闪锌矿晶体的太赫兹源实现方法较为简单,已有研究证明发射效率与晶体晶向选择,飞秒激光入射角以及偏振态相关,文章通过详细的理论分析与数学计算,讨论了正入射以及斜入射情况下太赫兹辐射最优化条件,获得了明确的飞秒激光入射角、偏振态、晶体晶向的选择依据,对提高太赫兹输出效率具有重要的指导意义。