柔性机械臂辅助空间站舱段对接阻抗控制

空间机械臂辅助舱段对接过程中存在测量与控制误差,易导致对接机构间存在较大接触力,传统FMA (Force MomentAccommodation)控制方法在测量接触力时无法消除大负载惯性力对测量的影响,且测量仪器的引入会进一步降低空间柔性机械臂的刚度。为此,文章提出了柔性机械臂辅助大负载空间舱段对接的阻抗控制方法,采用拉格朗日法推导了空间机械臂的关节输入力矩方程作为前馈输入,建立了含动力学前馈的空间机械臂阻抗控制程序,并以在商业软件ADAMS中建立的空间柔性机械臂与对接舱段组成的系统动力学模型作为控制对象,对系统进行ADAMS灢Matlab联合仿真。仿真结果表明,按照此控制方法,系统可克服外力干扰使目标解析点按照期望的方式运动;同时,通过测量机械臂关节运动参数即可实现对外力的准确感知,而不需额外添加力传感器,既消除了大负载惯性力对测量的影响,也不会导致柔性机械臂刚度的降低。     

铷频标物理系统的改进研究

物理系统是铷频标的核心部件,通过分析影响频率稳定度的因素,对物理系统内部结构进行了改进。改进后的物理系统采用分离滤光的三泡结构,增加了光学滤光技术,此外,物理系统还选用了磁控管微波腔。经测试,改进后的铷频标温度系数为9.7×10^-14/℃,频率稳定度约为1×10^-12/τ（1s≤τ≤10 000s）。     

CMOS星敏感器图像驱动及实时星点定位算法

利用CMOS图像传感器技术的低功耗和开发简单等优点,设计了新型CMOS星敏感器的图像采集驱动电路.该电路设计以现场可编程门阵列(FPGA)为核心,配以静态存储器和并口通讯功能,实现了图像的采集、存储和输出.同时根据4连通域图像分割的原理,在FPGA内部设计了一个数字电路模块,以实现该星敏感器的实时星点定位功能.该模块由于采用了流水线结构,可以和图像采集同步完成星点质心定位算法,减少了向星敏感器数据处理单元中的精简指令集计算机(RISC)的数据传输量和RISC进行星图跟踪和识别的工作量,提高了星敏感器的总体工作性能.对比软件处理结果,对星敏感器的图像采集和质心算法硬件电路进行了验证.     

分布式光电经纬仪测量系统信息传输设计

由于光电经纬仪测量系统中,测量摄影机越来越多地由高速电视所替代,信号传输在原来只有数据信息的基础上又增加了高速图像信息,从而使得信息传输量大大增加。就光电经纬仪测量系统中使用的导电环和经纬仪专用通讯系统接口在信息传输中的能力缺陷,分别寻找出多路空间互连光旋转连接器和光纤以太网的解决途径,为经纬仪的旋转平台和静止平台之间以及各经纬仪之间的信息传输,提出一种新的设计方案。     

联合变换相关法测量空间相机像移的抗噪性研究

为了研究使用联合变换相关器测量空间相机像移时噪声对测量精度的影响,分别对相关器加入背景噪声和图像噪声,通过仿真得到5种不同处理方法在不同噪声水平下的测量误差,并利用搭建的实验平台验证了使用联合变换相关法测量空间相机像移的有效性。结果表明,相比于其它相关器处理方法,使用功率谱相减并以0值为阈值二值化的方法得到的像移测量精度较高,即使对于SNR=1的输入图像,在含有背景噪声时,像移测量误差不大于0.12个像元,完全满足空间相机的使用要求。     

A debris image tracking using optical flow algorithm

This study proposes a motion detection and object tracking technique for GEO debris in a sequence of images. A couple of techniques (called the “stacking method” and “line-identifying technique”) were recently proposed to address the same problem. Although these techniques are effective at detecting the debris position and motion in the image sequences, there are some issues concerned with computational load and assumed debris motion. This study derives a method to estimate motion vectors of objects in image sequence and finally detect the debris locations by using a computer vision technique called an optical flow algorithm. The new method detects these parameters in low computational time in a serial manner, which implies that it has an advantage to track not only linear but also nonlinear motion of GEO debris more easily than the previous methods. The feasibility of the proposed methods is validated using real and synthesized image sequences which contain some typical debris motions.     

电子回旋共振离子推力器栅极光学系统的PIC/MCC模拟

为了寻求日益昂贵的电推力器工质氙气的替代品,探讨氩气作为电子回旋共振离子推力器工质的适用性,采用混合PIC方法模拟了氩等离子体在栅极光学系统中输运过程,分析了氩离子束流的聚焦效果、氩等离子体的空间分布和流动特性。结果表明:氩离子束流在已有栅极系统中具有良好的聚焦效果;束流中CEX离子仅占离子总数的万分之一,影响较小;氩气作为工质时,离子喷射速度为75km/s,加速栅极后回流速度为38km/s,与电动力学理论预估值一致。     

环境与灾害监测光学有效载荷发展综述

环境与灾害监测目标具有多样性、定量化要求高等特点,非常适合光学载荷发挥其信息量丰富、种类多、精度高等方面的优势。在国际上,此类光学载荷发展迅速,新技术不断涌现,值得学习借鉴。文章重点阐述了应用于环境与灾害监测民用卫星的光学有效载荷的发展现状和发展趋势,为中国第二代"环境与灾害监测预报小卫星星座"的相关光学有效载荷发展提供参考。     

小卫星高分辨率成像系统

对小卫星对地观测高分辨率成像系统进行了综述。介绍了国内外有极高分辨率（0．5～1．0m）、高分辨率（1．8～2．5m）和中高分辨率（4-10m）小卫星光学成像系统的性能,并与合成孔径雷达（SAR）成像系统进行了比较。给出了小卫星光学成像系统、SAR高分辨率成像系统和卫星平台的关键技术。讨论了未来小卫星及其高分辨率成像系统技术的发展趋势。     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.