能量和协方差检验的联合频谱感知算法研究

快速准确的频谱感知是认知无线电系统有效通信的前提。现有的能量检测算法易受噪声波动影响,为提高频谱感知的性能,采用了联合频谱感知算法。方法利用双门限的能量检测法进行粗检,并使用协方差检测算法对中间混淆区域进行二次判决。在噪声不确定的情况下,对联合频谱感知算法性能进行了仿真分析。仿真结果表明,在噪声波动较大时,算法有效地提高频谱检测的性能,而且计算复杂度得到降低,并优于能量检测法和协方差检测法。     

Distributed online mission planning for multi-player space pursuit and evasion

There are three important roles in evasion conflict: pursuer, target and defender. Pur-suers’ mission is to access targets;targets’ mission is to escape from pursuers’ capture;defenders’ mission is to intercept pursuers who are potentially dangerous to targets. In this paper, a distributed online mission plan (DOMP) algorithm for pursuers is proposed based on fuzzy evaluation and Nash equilibrium. First, an integrated effectiveness evaluation model is given. Then, the details of collaborative mission planning which includes the co-optimization of task distributing, trajectory and corresponding maneuvering scheme are presented. Finally, the convergence and steadiness of DOMP are discussed with simulation results. Compared with centralized mission planning, DOMP is more robust and can greatly improve the effectiveness of pursuing. It can be applied to dynamic scenario due to its distributed architecture.     

The effects of proton radiation on UHMWPE material properties for space flight and medical applications

Ultra High Molecular Weight Polyethylene (UHMWPE) is a polymer widely used as a radiation shielding material in space flight applications and as a bearing material in total joint replacements. As a long chain hydrocarbon based polymer, UHMWPE’s material properties are influenced by radiation exposure, and prior studies show that gamma irradiation is effective for both medical sterilization and increased wear resistance in total joint replacement applications. However, the effects of space flight radiation types and doses on UHMWPE material properties are poorly understood. In this study, three clinically relevant grades of UHMWPE (GUR 1020, GUR 1050, and GUR 1020 blended with Vitamin E) were proton irradiated and tested for differences in material properties. Each of the three types of UHMWPE was irradiated at nominal doses of 0 Gy (control), 5 Gy, 10 Gy, 20 Gy, and 35 Gy. Following irradiation, uniaxial tensile testing and thermal testing using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA) were performed. Results show small but significant changes in several material properties between the control (0 Gy) and 35 Gy samples, indicating that proton irradiation could have a effect on the long term performance of UHMWPE in both medical and space flight applications.     

Synergistic use of multitemporal RAMP,ICESat and GPS to construct an accurate DEM of the Larsemann Hills region,Antarctica

An enhanced digital elevation model (DEM) of the Larsemann Hills region, east Antarctica, is constructed synergistically by using highly accurate ground-based GPS measurements, satellite-derived laser altimetry (GLAS/ICESat) and Radarsat Antarctic Mapping Project (RAMPv2) DEM-based point elevation dataset. Our DEM has a vertical accuracy of about 1.5 times better than RAMPv2 DEM and seven times better than GLAS/ICESAT-based DEM. The accuracy is improved by validating the RAMPv2 DEM elevation by supplementing with GLAS/ICESat and DGPS survey data, when compared to that of DEM constructed by using GLAS/ICESat or RAMPv2 alone. With the use of accurate GPS data as ground control points reference elevations, the DEM extracted is much more accurate with least mean RMSE of 34.5 m than that constructed by using a combination of GLAS/ICESat and RAMPv2 as true reference. The newly constructed DEM 7 achieves highest accuracy with the least average elevation difference of 0.27 m calculated using 46 ground reference points. Available DEMs of Antarctic region generated by using radar altimetry and the Antarctic Digital Database indicate elevation variations in the range of 50–100 m, which necessitates the generation of local DEM and its validation by using ground truth. This is our first attempt of fusing multi-temporal, multi-sensor and multi-source elevation data to generate a DEM of any part of Antarctica, in order to address the ice elevation change to infer the ice mass balance. Our approach focuses on the strengths of each elevation data source to produce an accurate DEM.     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

航天器分裂体或抛射物的轨道形成和演化

由卫星和碎片爆炸或相互间碰撞所产生的分裂体,或由在轨航天器向外抛射所产生的抛射物,对空间环境的影响正日益增大。对它们轨道形成和演化的研究可以为分析空间解体事件提供一种有效方法。本文利用Kep-ler运动积分以及受摄二体问题的分析解,建立了分裂体或抛射物的轨道形成及其演化与分裂或抛射速度之间的关系,从而为理解以各个方向、不同大小的速度分裂或抛射的物体的轨道演化特征提供理论依据。文章最后通过数值验证表明了该方法的有效性。     

Digisonde observations of TIDs with frequency and angular sounding technique

A technique for studying ionospheric wavelike phenomena, primarily AGW/TID events, is developed based on the solution of the problem of radio wave propagation in ionospheric plasma disturbed by wavelike processes. A perfectly reflecting surface model is used for representing TIDs propagating at ionospheric heights. This technique is a generalization of the Frequency-and-Angular Sounding (FAS) method developed earlier for oblique TID diagnostics using transmitters of opportunity. Trial measurements were made in November 2003 with two DPS-4 systems at Millstone Hill Observatory, providing experimental validation of the developed method by comparing the results of disturbance diagnostics to those simultaneously obtained with the original (oblique) FAS method. The TID parameters recovered during the November 2003 campaign suggest that the observed disturbances predominately propagated equatorward which likely indicates their sources to be in the auroral region. The equatorward propagating AGW/TIDs are typical for disturbed geomagnetic conditions which were observed during the campaign. Implementation of the generalized FAS technique in the DPS sounder allowed development of a dedicated data acquisition system for ionospheric disturbance diagnostics. Routine measurements with the developed technique using the existing world-wide network of Digisondes (GIRO) will make it possible to conduct large-scale studies of the AGW/TID phenomena.     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

空间核电源热管式辐射散热器热分析与参数优化

针对空间热管辐射散热器的特殊工况对散热器进行热分析建模，通过分析其传热原理，建立出热阻模型，并通过和实际设计进行对比，验证模型和计算方法的可行性。选取翅根温度、翅片长度和翅片厚度等参量作为约束条件，分别对热管式空间辐射散热器的翅片散热效率和系统质量特性进行优化分析，获得最优设计参数。