装备保障链敏捷性评价的指标体系及方法

装备保障链敏捷性评价是装备保障链敏捷化的先行条件。提出了装备保障链敏捷性的概念,建立了装备保障链整体和单元敏捷性的评价指标体系,并综合运用群体层次分析法和模糊综合评价方法对装备保障链敏捷性进行评价。研究结果为我军构建敏捷的装备保障链提供了理论与方法支持。     

几何代数域内的光流场改进算法

提山了一种新的光流场计算方法：首先,在几何代数域内推导了光流约束方程的新形式;然后,在速度场平滑的基础上,通过求解关于初值问题的热传导方程求解光流场;最后,给出光流场的数值解和仿真结果。实验证明此方法是有效的。     

液体圆柱射流破碎过程的实验

采用高速摄像仪对圆柱射流的表面剥离现象和射流破碎长度进行了实验,在低速射流下,分析了Rayleigh模式下主液滴和卫星液滴形成过程及运动规律.随着射流速度的增大,射流表面开始出现了表面剥离小液滴.并发现存在一个临界雷诺数,当超过临界雷诺数时,射流表面出现表面剥离现象.通过对射流中表面剥离现象的实验和分析,给出了两种射流破碎长度随雷诺数变化规律和破碎长度拟合关系式.      

航天器两自由度扫描镜图像运动补偿技术研究

研究航天器的两自由度扫描镜图像运动补偿问题。在姿态估计信息的基础上,给出了一种运动补偿算法。算法中不仅补偿了姿态估计信息,还同时考虑了姿态信息中的长周期系统误差。利用扫描镜在特定工作模式下相对惯性空间的准确定向能力和系统误差的长周期特性,给出了一种系统误差的估计和补偿算法,每隔一定的时间段对系统误差估计值进行更新并加以补偿,进一步提高了扫描精度。基于一颗地球静止轨道卫星的数值仿真结果验证了补偿算法的有效性。     

航天器首飞飞行事件系统责任保证链管理

飞行事件系统责任保证链管理是航天器首飞试验质量管理的重要组成部分,是保证发射试验成功的重要管理手段。文章介绍了航天器首飞飞行事件系统责任保证链管理要点,并以某卫星天线展开事件为例介绍了飞行事件系统责任保证链管理实践。     

基于数字近景摄影测量的天线变形测量

文章介绍了基于数字近景摄影测量原理的天线变形测量方法。该方法利用2台CCD相机交会摄影来获取被测面图像,并对被测面上特殊标志点进行中心坐标提取,然后利用光束法平差解算标志点中心坐标。测量精度可达到1:50000,可用于卫星天线研制过程中空间环境模拟试验的检验,为卫星天线在轨正常工作提供可靠性保证。     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

空间绳系编队的动力学及稳定展开控制研究

以三角构型的空间绳系编队系统为对象开展了动力学特性分析和稳定展开控制研究。首先，针对以往编队动力学建模的精度问题，采用Lagrange法建立了系统动力学模型，建模时充分考虑了系绳的弹性，可在不增加计算量的同时保留系统的弹性特性。其次，根据所建立的动力学模型，定量分析了编队自旋稳定时自转角速度的范围，为之后的稳定展开控制提供理论依据。由于受制于执行机构精度和控制输入的限制，空间绳系编队系统是一个典型的欠驱动系统，采用分层滑模实现编队的稳定展开控制，仿真结果验证了该控制方法的有效性。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

空间红外遥感器定标机构故障应急退出装置

针对空间红外遥感器定标机构故障模式,首次设计了一种基于记忆合金的应急退出装置,以解决因电机或控制电路故障而导致的整个成像系统失效问题。该应急退出装置通过对记忆合金棒进行加热,使其受热收缩,从而驱动齿轮传动系统脱离啮合状态,完成机构复位运动。为验证该应急退出装置的功能和性能,利用研制产品进行了真空、大气环境等多种状态下的应急退出试验。结果表明:在大气和真空环境中,该装置能实现多种状态下的可靠退出功能;在28 V额定直流工作电压下,应急退出总时间可达145～152 s。该机构具有实现简便、可靠性高、退出速度快等优点,在空间机构的故障应急方面具有较大的工程应用潜力。