航空器RNP运行中飞行轨迹监测的研究与实现

从分析RNAV／RNP运行对航空器飞行时机载设备的性能特点出发，说明了RNAV／RNP运行初期对飞行品质的监测要求和意义，并就QAR数据作为监测数据源进行了精度分析．表明其可用性，进而给出了一种通过处理QAR数据．反演实际飞行的仿真轨迹，与设计轨迹之间实现了直观比对，并计算给出了比对差值的均值与方差，实现了监测飞行品质的目的。     

传像光纤在瞄准方位传递中的应用研究

介绍了光纤传像技术的原理和光纤成像系统的特点，详细分析了传像光纤应用于瞄准方位传递的可行性，并阐述了存在的问题和关键技术的解决。     

Waveform-based spaceborne GNSS-R wind speed observation: Demonstration and analysis using UK TechDemoSat-1 data

This paper explores two types of mathematical functions to fit single- and full-frequency waveform of spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R), respectively. The metrics of the waveforms, such as the noise floor, peak magnitude, mid-point position of the leading edge, leading edge slope and trailing edge slope, can be derived from the parameters of the proposed models. Because the quality of the UK TDS-1 data is not at the level required by remote sensing mission, the waveforms buried in noise or from ice/land are removed by defining peak-to-mean ratio, cosine similarity of the waveform before wind speed are retrieved. The single-parameter retrieval models are developed by comparing the peak magnitude, leading edge slope and trailing edge slope derived from the parameters of the proposed models with in situ wind speed from the ASCAT scatterometer. To improve the retrieval accuracy, three types of multi-parameter observations based on the principle component analysis (PCA), minimum variance (MV) estimator and Back Propagation (BP) network are implemented. The results indicate that compared to the best results of the single-parameter observation, the approaches based on the principle component analysis and minimum variance could not significantly improve retrieval accuracy, however, the BP networks obtain improvement with the RMSE of 2.55 m/s and 2.53 m/s for single- and full-frequency waveform, respectively.     

Development and verification of an innovative photomultiplier calibration system with a 10-fold increase in photometer resolution

In this study, we construct a photomultiplier calibration system. This calibration system can help scientists measuring and establishing the characteristic curve of the photon count versus light intensity. The system uses an innovative 10-fold optical attenuator to enable an optical power meter to calibrate photomultiplier tubes which have the resolution being much greater than that of the optical power meter. A simulation is firstly conducted to validate the feasibility of the system, and then the system construction, including optical design, circuit design, and software algorithm, is realized. The simulation generally agrees with measurement data of the constructed system, which are further used to establish the characteristic curve of the photon count versus light intensity.     

“读者接受”理论与《高级英语》教学自主学习模式研究

借鉴"读者接受"理论中以"读者为中心"的观点,研究《高级英语》课程教学的自主学习模式。本文认为,学生是审美活动的主体,在该教学模式中研究学生的元认知特点、教材、教学任务的设计和有效控制等因素,注重教学过程的研究,在实践中有效实现以学生为中心、培养学生综合素质的教学理念。     

低成本IMU／GPS组合导航系统研究

ＧＰＳ／ＩＮＳ组合导航系统已在一定领域得到应用，而ＩＮＳ昂贵的价格限制了它的广泛应用，本文采用低成本惯性测量组件（ＩＭＵ）设计了低成本ＩＭＵ／ＧＰＳ组合系统的硬件和相应的软件，进行了静态实验和数据处理，系统的俯仰角和横滚角误差均小于０．２°，实验结果表明，低成本组合系统的性能较好，而其性能价格比更高。     

机场导航台无线遥控

随着民航机场建设的加强，机场导航台遥控方式的选择渐渐提上议程。针对无线控遥的特点和功能，提出了利用以ＰＣ机为主的无线遥控原理的硬件模型。     

Real-time fault detection method based on belief rule base for aircraft navigation system

Real-time and accurate fault detection is essential to enhance the aircraft navigation system’s reliability and safety. The existent detection methods based on analytical model draws back at simultaneously detecting gradual and sudden faults. On account of this reason, we propose an online detection solution based on non-analytical model. In this article, the navigation system fault detection model is established based on belief rule base (BRB), where the system measuring residual and its changing rate are used as the inputs of BRB model and the fault detection function as the output. To overcome the drawbacks of current parameter optimization algorithms for BRB and achieve online update, a parameter recursive estimation algorithm is presented for online BRB detection model based on expectation maximization (EM) algorithm. Furthermore, the proposed method is verified by navigation experiment. Experimental results show that the proposed method is able to effectively realize online parameter evaluation in navigation system fault detection model. The output of the detection model can track the fault state very well, and the faults can be diagnosed in real time and accurately. In addition, the detection ability, especially in the probability of false detection, is superior to offline optimization method, and thus the system reliability has great improvement.     

INVESTIGATION OF TIGHTLY COUPLED SINS/GPS INTEGRATION MIDCOURSE GUIDANCE FOR AIR-TO-AIR MISSILES

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＴＩＧＨＴＬＹＣＯＵＰＬＥＤＳＩＮＳ／ＧＰＳＩＮＴＥＧＲＡＴＩＯＮＭＩＤＣＯＵＲＳＥＧＵＩＤＡＮＣＥＦＯＲＡＩＲ┐ＴＯ┐ＡＩＲＭＩＳＳＩＬＥＳＦｕＬｉ（富立），ＦａｎＹａｏｚｕ（范耀祖），ＮｉｎｇＷｅｎｒｕ（宁文如）（Ｆ...     

基于交叉验证的捷联惯导制导工具误差分离方法

在捷联惯导制导工具误差分离过程中引入交叉验证检验制导工具误差分离精度,并基于均方误差准则建立量化检验指标.首先建立简化的制导工具误差分离模型,并将数据划分成训练集和检验集;然后利用训练集进行制导工具误差分离;最后利用检验集和量化检验指标对分离效果进行检验.数学仿真表明,提出的误差分离模型正确可靠,精度较高,交叉验证能够对分离效果进行有效检验.