从城市规划与发展角度对军民合用机场的反思——以济宁曲阜机场为例

以济宁曲阜机场为例,结合菏泽机场规划,说明了济宁曲阜机场存在机场位置与旅游景区位置发生偏离、对济宁城市空间扩展引导不足、限制菏泽机场规划、影响济宁综合交通枢纽建设以及机场容量无法满足旅客量增长等问题,这些问题具有一定的普遍意义,希望能促进规划和决策者对军民合用这一机场建设方式采取更为谨慎的态度.     

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.     

低空无人机路径规划算法综述

随着无人机技术的发展,无人机在低空的应用场景越来越多,复杂的低空环境对无人机路径规划算法提出了新的要求。本文总结了近年来常用的无人机路径规划算法,包括图搜索算法,线性规划算法,智能优化算法（遗传算法、粒子群算法、蚁群算法）,强化学习算法;对这些算法的原理、适用场景及其优缺点进行了归纳分析;并基于无人机发展现状对无人机路径规划算法进行了展望。     

车间生产计划与加工过程的集成系统MFAS

在自动化程度低的传统机械加工车间,由于生产计划与加工过程之间缺乏紧密的联系,使得计划对生产现场的管理与控制比较困难。目前开发的物流自动化系统ＭＦＡＳ（Ｍａｔｅ－ｒｉａｌＦｌｏｗｉｎｇＡｕｔｏｍａｔｉｃＳｙｓｔｅｍ）,以层次式的计划管理方法为基础,利用计算机网络和在线式立体仓库,将车间生产计划与加工过程有效地集成为一个整体。     

深空探测器动态约束规划中的外延约束过滤方法研究

随着深空探测任务的增加以及星上科学任务的日益复杂,深空探测器自主任务规划与调度技术成为研究的热点。在深空探测器任务特点与系统约束分析的基础上,将智能规划理论与约束可满足技术相结合,研究多层约束规划模型中约束的动态特征,设计了基于动态约束表的外延约束快速过滤算法,根据领域信息中活动间的冲突性特征来对新加入的活动进行分类和一致性检查。仿真结果表明:提出的算法能够有效地降低约束处理中无效的约束检查次数,降低问题处理过程中的算法回溯,提高规划效率和成功率。     

Mission-oriented cooperative 3D path planning for modular solar-powered aircraft with energy optimization

Modular Solar-Powered Aircraft(M-SPA) is a kind of High-Altitude Long-Endurance(HALE) aircraft which exploits the mission advantage of swarm UAV and the HALE advantage of large aspect-ratio SPA. M-SPA’s separated mode and combined mode give it the potential to maximize the mission efficiency with limited solar energy. In this paper, firstly, oriented by the mission of maximizing the cruise area, the overall design of the M-SPA is modeled, including the energy model, the aerodynamic model and the...     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

基于位姿可达空间的太空机械臂容错路径规划

为了使太空机械臂在关节锁定故障后仍能继续完成后续任务,提出一种基于位姿可达空间的太空机械臂容错路径规划方法。基于牛顿-拉夫逊法计算太空机械臂关节人为限位,完成满足任务需求的退化工作空间求解,通过构造姿态可达度指标,在退化工作空间的基础上建立故障机械臂基坐标系下的位姿可达空间。通过在代价函数中增加最小奇异值代价项改进传统A^*算法,基于改进A^*算法在所建立的位姿可达空间内完成太空机械臂容错路径规划。所提方法综合了位姿可达空间与改进A^*算法各自的优势,实现了关节锁定故障太空机械臂同时满足避奇异与位姿可达要求的轨迹搜索。通过建立7自由度太空机械臂运动学模型开展数值仿真研究,仿真结果验证了所提容错路径规划方法的有效性。     

航空发动机机匣摆线粗加工轨迹规划方法

针对机匣零件粗加工过程中凸台多、加工余量大、材料难切削、刀具磨损快、加工周期长等特点,提出了一种机匣摆线粗加工刀具轨迹规划方法,该方法能有效控制切削过程中刀具负载的变化,改善刀具切削过程中的加热-冷却循环,减缓刀具的磨损,提高机匣粗加工效率。首先,通过对两种摆线模型的分析,建立了摆线铣数学模型,并分析了摆线铣的优缺点;其次,结合机匣零件特点,将模型在精度范围内离散为点模型,利用圆锥将模型展开并建立展开模型与原始模型间的映射关系。通过对可加工区域的划分和平面逼近,生成了适用于机匣零件的摆线粗加工刀具轨迹。最后,分别通过摆线铣刀具磨损实验、平面型腔摆线铣实验和机匣摆线铣实验,验证了摆线铣在降低刀具磨损、延长刀具寿命方面的有效性,以及本文轨迹生成算法在航空发动机机匣实际加工中的正确性和高效性。研究成果能有效缩短加工周期、降低加工成本,提升机匣零件的粗加工效率。     

复杂构型金属橡胶毛坯铺设路径规划

基于金属橡胶毛坯自动化铺设工艺,对遗传算法进行合理改进,进行了复杂构型金属橡胶毛坯铺设的定位销优化设计和路径规划。针对定位销优化设计和路径规划问题,建立了改进的编码、交叉、变异算子,并提出评价因子对遗传算法的迭代过程进行评价。优化的定位销排布和铺设路径可以较好地实现复杂构型金属橡胶毛坯铺设,铺设10层时,优化路径对应的目标函数b的值比经验路径小54%,路径规划作用显著。单层路径规模对铺设效果影响较小;单层路径规模不同时,毛坯内部接触状态随着铺设螺旋卷长度的增加趋于一致。为复杂构型金属橡胶毛坯铺设提供了理论依据。