基于物理规划的高超声速飞行器滑翔式再入轨迹优化

 轨迹优化是新型高超声速滑翔式再入飞行器方案设计的关键技术之一。物理规划方法能够以较低的计算代价获得设计者偏好的多目标优化问题的折中解。基于该方法研究滑翔式再入最优飞行轨迹。首先介绍物理规划方法求解多目标优化问题的数学模型,然后将考虑射程最大、热载最小、热流密度峰值最小和弹道最稳定4个目标的再入最优轨迹问题纳入物理规划的框架求解。以某带翼锥形再入飞行器为例,通过计算并分析单目标优化结果,确定具体的偏好结构,采用遗传算法求解了考虑热流、过载、动压和终端条件约束的多目标最优轨迹。优化计算结果验证了物理规划方法的有效性。分析了沿最优轨迹飞行的物理原因和基本迎角控制规律,可为滑翔式再入飞行器的最优轨迹方案设计提供依据。     

飞行器控制分配技术研究现状与展望

综述了现代飞行器控制分配技术的研究和应用状况.首先简要回顾了线性控制分配方法,然后着重论述了非线性控制分配技术的最新研究成果,包括截距修正法、分段线性规划法、非线性规划法及包含神经网络计算、遗传算法和模糊逻辑在内的智能控制分配技术,最后讨论了有待于进一步完善和深入研究的若干问题.     

无人机航迹规划技术研究及发展趋势

通过对无人机航迹规划的研究,构建了无人机航迹规划的结构框架;分析了无人机系统约束及威胁场约束,探讨了无人机航迹几何建模方法及规划算法的国内外研究概况;并着重分析了规划算法。最后,阐述了无人机航迹规划面临的关键问题及发展趋势。     

基于Hamilton-Jacobi方程的编队飞行控制

 针对椭圆参考轨道的编队飞行控制系统,基于哈密尔顿 雅克比（Hamilton-Jacobi）方程,给出一种新的生成函数半解析近似解的计算方法,同时推导了编队飞行控制系统相对运动的线性状态转移矩阵,并且验证了模型的精度。在此基础上,结合一个具体的编队飞行任务,采用线性规划算法得到了队形保持的闭环控制器,该算法得到的是脉冲形式的控制序列,因此更具有实际意义。同时还提出了一种简单的避免生成函数奇异点的方法,从而减少了生成函数间相互转换所带来的计算量。最后的非线性仿真结果验证了控制方法的有效性。     

机场容量利用及流量分配优化策略

为了充分利用机场容量,减少航班延误,需要合理分配进离场流量。以机场容量作为约束,以进离场航班总延误成本最小作为目标,建立进离场流量分配优化模型。构建随延误时间呈超线性增长的延误成本计算公式,引入航班进离场延误成本权重系数作为不同进离场优先级的决策偏好信息。用动态规划法求解模型,并引入最优决策候选集合的概念,缩小计算过程中的搜索量,减少计算时间。算例结果分析表明,方法可以在机场容量约束下得出进离场流量分配的最优策略,使得航班总延误成本最小,并且快速计算可以满足实时决策支持的要求。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

多语言混合编程的民用飞机航材预测与配置平台

合理采购并在多个航站之间合理配置航材数量对于民用飞机的经济运行十分重要,而航材预测与配置研究形成的理论算法内容相对复杂。为推动这些算法程序能够有效投入工程应用,基于 Java 语言,并整合Matlab、Python 语言编写的算法程序,开发多语言混合编程的民用飞机航材预测与配置平台。首先,介绍平台中集成的航材预测与配置的支持向量机算法和边际分析算法,并叙述混合编程的实现方式;然后,阐述平台设计的详细内容,并对混合编程的实现方式及不同程序语言间参数类型的转换方法进行说明;最后,运用实际工程数据对平台的功能进行使用测试。结果表明：平台的人机界面友好、操作简便,较好地实现了航材预测与航材配置功能,能够为相关理论算法通过平台技术满足工程需要提供借鉴和思路。