TP86A单板机连接ADA-1612转换板的接口

ADA-1612转换板是12位的模入模出板。它可以直接用于具有S-100总线接口的单板机系统。本文简单分析了ADA-1612转换板的结构原理,详细内容参见文[2]。TP86A采用INTEL 8086CPU的十六位单板机。本文为它设计了连接ADA-1612转换板的S-100总线接口。并介绍了该接口电路和使用该接口的编程方法。现在,该接口已经实际应用到几种TP86A组成的系统。     

求解最小费用流的复合标号法

本文在求最短路和求最大流标号法的基础上,提出了求解最小费用流的复合标号法。利用这种方法可以在一次标号的过程中找到具有最小费用的增广链。该算法具有简单、易行、迭代次数少,而且易于理解的特点。     

双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

基于线性规划的多操纵面重构控制研究

为实现多操纵面飞机的重构控制,提高飞机飞行的安全性能,提出了一种基于线性规划的多操纵面重构控制策略.针对操纵面卡死、松浮、损伤等典型故障情况,推导了相应的重构分配器,通过基于线性规划的直接分配方法来实现在操纵面故障下的重构控制.仿真结果表明,该控制策略能有效处理典型操纵面故障,发生故障时仍能快速跟踪控制指令,保证较好的...     

复杂电磁环境下无线接收机电磁兼容快速测试技术应用CSCD

复杂射频电磁环境下,无线接收机作为主要的敏感设备,其电磁兼容性直接影响着整个武器装备的电磁兼容特性. 本文针对GJB 151B中对于接收机非线性测试方法的局限性,引入了一种利用自动双频测试系统对接收机干扰响应的快速测试方法;并搭建了实验室半实物仿真测试平台,检测了某接收机在（ 4-6 ） GHz组合频率干扰下的所有非线性的干扰响应通道. 测试结果对于评估接收机及其所在系统的外部电磁环境适应性具有重要参考价值.     

基于特征的数控编程技术在航空企业的推广应用

针对国内航空企业飞机结构件数控编程中存在的重复工作量大、效率低、质量不稳定、规范性差等问题,通过面向多主机厂推广基于特征的数控编程技术,切实提高飞机结构件数控编程的效率与质量.首先概述了基于特征的快速程编(FBM NUAA)系统的整体架构,并且介绍了基于特征的数控编程技术在多家主机厂中的推广与应用情况,以及前期推广中遇到的问题,并提出了解决方案.根据多主机厂多机型过百项飞机结构件的实际应用结果表明采用基于特征的快速程编系统进行数控编程,刀轨平均自动生成率超过90％,编程时间较传统编程方式平均缩短70％以上.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

基于非线性变换的加速度计误差标定与补偿CSCD

为提高三轴加速度计测量精度,分析其误差来源和产生机理,建立了误差模型;根据误差模型和重力场幅值不变特性,推导出非线性观测方程。引入两个未知的参数向量,通过数学变换把非线性观测方程变形为关于新未知参数的线性方程;然后采用批量最小二乘法求出新的未知参数,并根据误差模型参数和新未知参数之间的关系,利用逆解析运算求出对应的零点偏差、灵敏度误差和三轴不正交误差。实验结果表明,加速度计正负误差峰值间距可以减小100倍左右,精度可达10-3m/s2,并具有很好的可重复性。该方法算法效率较高,补偿效果显著。     

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.