卫星脉冲推力最优逃逸返回轨迹的非线性规划

重点研究了卫星通过轨道机动逃避碰撞、拦截并经一段时间后返回原轨道的逃逸方式。利用非线性规划理论建立了脉冲推力能量最省的逃逸轨迹规划模型，并考虑非球形摄动的影响对模型进行了修正。通过仿真验证了模型的正确性及求解的可行性，并分析了非球形摄动因素对逃逸过程的影响。     

振动、冲击环境下支架减振器刚度优化设计

文章在某型号的电子设备支架减振器设计中,综合考虑了振动、冲击两种主要的力学环境.以减振器刚度为设计变量,将刚度的倒数作为目标函数,根据振动、冲击环境设计要求确定了约束条件,建立了减振器刚度优化的数学模型.采用ANSYS作为优化设计的平台,随机振动响应分析采用振型叠加法,冲击响应分析采用Newmark时间积分法,对该问题进行了优化求解,取得了满意的结果,为电子学系统的减振设计提供了依据.     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

新型主减隔振装置隔振性能测试试验研究

为解决新研全尺寸主减隔振装置地面性能试验中由于试验件尺寸大、重量重和试验状态多等难点,同时缩短试验周期并降低试验成本,提出了一种通过实测动载荷传递率评估主减隔振装置隔振性能的地面性能试验方法,给出了试验方案、试验夹具安装、试验内容以及过程。通过理论分析和试验结果,验证了实测动载荷传递率试验方案的可行性,测试结果真实可靠,为后续类似的系统级全尺寸隔振性能试验提供了一种新的试验方法。试验结果表明:新型主减隔振装置对垂向、航向和侧向三向激励的隔振效率均超过了80%,达到了预期的减振效果。     

有限推力下时间最优轨道转移

研究了一种有限推力作用下的时间最优轨道转移计算方法。以非奇异根素形式的高斯行星摄动方程为基础,由庞德里亚金极小值原理导出正则方程组,通过将最优控制问题转化为协状态初值为待优化参数的参数优化问题,并通过非线性规划求解得到的参数优化问题,从而避开求解两点边值问题的困难。文章最后给出2个算例,分别计算了零倾角零偏心率最优轨道转移和大倾角改变最优轨道转移。计算过程及结果表明本文所用方法对协状态初值猜测敏感性小,收敛迅速;零倾角零偏心率情况下无奇异;所得控制轨线光滑。     

火箭引射模态下主火箭总压与RBCC发动机的匹配性

基于传统的"等压面假设"理论,建立了RBCC发动机主火箭的引射性能分析模型,研究了主火箭总压与RBCC发动机的匹配性。研究结果表明,若隔离段通道面积比小于0.65,在主火箭总压较低条件下,隔离段内二次流容易达到壅塞,无法进一步提高空气流量;在地面静止状态下,随主火箭总压增加,空气流量逐步增大,等压面上形成Fabri壅塞后,进一步增加主火箭总压,反而会降低空气流量;在火箭引射模态下,RBCC发动机的工作状态可细分为引射作用占主导地位的进气道亚临界状态和临界状态、冲压作用占主导地位的进气道超临界状态,其分界马赫数分别约为0.7和1.5。     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

Acceleration sensors based modal identification and active vibration control of flexible smart cantilever plate

Some flexible appendages of spacecrafts, such as solar panels, are cantilever plate structures. Thus, vibration problem is unavoidable when there is slewing maneuver or external disturbance excitation. Vibration of such cantilever plate structures includes coupled bending and torsional motion. Furthermore, the low amplitude vibration near the equilibrium point is very difficult to be quickly suppressed due to nonlinear factors of the hardware in the system, which is harmful to stability and attitude control accuracy. To solve these problems, acceleration sensor-based modal identification and active vibration control methods are presented for the first two bending and the first two torsional modes vibration of the cantilever plate. Optimal placements of three acceleration sensors and PZT patches actuators are performed to decouple the bending and torsional vibration of such cantilever plate for sensing and actuating, and identifications are achieved by experiments. A nonlinear control method is presented to suppress both high and low amplitude vibrations of flexible smart cantilever plate significantly. Experimental comparison researches are conducted by using acceleration proportional feedback and the presented nonlinear control algorithms. The experimental results demonstrate that the presented acceleration sensor-based methods can suppress the vibration of cantilever plate effectively.     

壁温对隔离段激波串振荡的影响

为了探索存在换热条件下超燃冲压发动机隔离段内部的复杂流动机理,采用2阶精度的非定常数值模拟程序研究了壁温对隔离段内部激波串振荡特性的影响。结果表明:压力振荡曲线与激波串前缘位置之间存在紧密关系。此外,随着壁温升高,隔离段壁面压力振荡的频率减小、振幅增加。研究还发现,隔离段压力振荡标准差最大值位于激波串前缘激波及其与上下壁面边界层相互作的位置,而湍动能最大值则分布在分离区后侧剪切层区域内。