陶瓷基复合材料高精度宏细观统一本构模型研究

基于高精度通用单胞模型(HFGMC)建立了陶瓷基复合材料(CMCs)的宏细观统一本构模型.首先基于CMCs的细观结构和损伤特点建立代表体元(RVE)并定义细观损伤变量.然后采用HFGMC模型计算细观损伤变量的演化,由此获得宏观应力应变曲线,从而建立了CMCs的宏细观统一本构模型.采用该本构模型预测了CMCs的宏观应力应变曲线,与实验结果吻合良好.结果表明该本构模型能够模拟CMCs的拉伸与损伤行文,为CMCs强度分析提供了有效手段.      

3种铝合金材料动态性能及其温度相关性对比研究

 对3种铝合金2024-T351、7050-T7451和LY12-CZ进行了温度在77～573 K的静、动态压缩（应变率10^-3～6 000/s）和拉伸（应变率10^-3～3 000/s）试验,分别得到了3种铝合金材料的应力 应变关系和失效应变。对比研究结果表明,随温度升高3种材料的塑性流动应力降低,应变率敏感性增加。最后基于Johnson-Cook模型,拟合了用以预测铝合金材料塑性流动应力的模型参数,其预测结果与试验结果吻合较好。     

Super rogue wave catalysis in Titan’s ionosphere

Super rogue ion-acoustic waves are proposed as a physical catalyst for the heavy hydrocarbon ions formation in the Titan ionosphere. We justified that analytically and numerically by probing a Titan referenced plasma system, consists of the most abundant positive ions and superthermal electrons. A solution of the nonlinear Schrödinger equation (NLSE) has provided us by the plasma (un) stable regions at altitude 900–1200 km from the Titan surface with superthermal parameter values, relative ion to electron densities, and temperature ratio variations. Our results are not only agreed with the Cassini data but also predict a chemistry independent approach for the heavy hydrocarbons’ formation conditions.     

单通道控制旋转弹系统动力学建模与Hopf分岔

为准确预测旋转弹系统的锥形运动形态并判断其稳定性，提出一对鸭舵引起的气动不对称性以及可能引起复杂非线性动力学特性的非线性因素，建立能准确描述单通道控制旋转弹系统姿态运动的复数形式的动力学模型并分析讨论其动态稳定性条件。利用分岔理论对单通道控制旋转弹系统开展Hopf分岔研究，给出了Hopf分岔发生的判断准则；推导了用于判定极限环稳定的第一Lyapunov系数。数值仿真结果验证了条件的正确性与有效性并发现了拟周期运动及混沌运动。研究结果为旋转弹的控制参数设计及结构参数设计提供理论参考。     

晶须增韧陶瓷的微裂纹演化及本构描述

本文利用作者改进的等效夹杂理论研究了含随机分布晶须和微裂纹陶瓷的微裂纹演化及由其引起的材料本构非线性，定量计算了热残余应变、晶须含量及尺寸比的影响，对材料的微裂纹演化及破坏过程进行了数值模拟，得到了一些有意义的结论     

直升机贴地飞行时的驾驶员诱发振荡研究

主要阐述直或机贴地飞行时的驾驶员诱发振荡问题，导出了贴地突防和迅速停止动作、地形跟踪时的“海豚”运动和贴地飞行时滑雪运动条件下诱发振荡时操纵位移和稳定裕度的计算公式，计算了Ｚ－８直长机的纵向试验结果，并进行了误差分析。计算结果表明，所研究的方法是可行的，可推广应用于各种直升机的闭环分析和计算。     

Variational Bayesian Kalman filter using natural gradient

We propose a technique based on the natural gradient method for variational lower bound maximization for a variational Bayesian Kalman filter. The natural gradient approach is applied to the Kullback-Leibler divergence between the parameterized variational distribution and the posterior density of interest. Using a Gaussian assumption for the parametrized variational distribution, we obtain a closed-form iterative procedure for the Kullback-Leibler divergence minimization, producing estimates of...     

Active fault tolerant control for vertical tail damaged aircraft with dissimilar redundant actuation system

This paper proposes an active fault-tolerant control strategy for an aircraft with dissim-ilar redundant actuation system (DRAS) that has suffered from vertical tail damage. A damage degree coefficient based on the effective vertical tail area is introduced to parameterize the damaged flight dynamic model. The nonlinear relationship between the damage degree coefficient and the corresponding stability derivatives is considered. Furthermore, the performance degradation of new input channel with electro-hydrostatic actuator (EHA) is also taken into account in the dam-aged flight dynamic model. Based on the accurate damaged flight dynamic model, a composite method of linear quadratic regulator (LQR) integrating model reference adaptive control (MRAC) is proposed to reconfigure the fault-tolerant control law. The numerical simulation results validate the effectiveness of the proposed fault-tolerant control strategy with accurate flight dynamic model. The results also indicate that aircraft with DRAS has better fault-tolerant control ability than the traditional ones when the vertical tail suffers from serious damage.     

非线性递推最小模型误差估计

基于最优控制理论和两点边值问题的不变式嵌入法，提出了模型不确定性非线性性系统递推最小模型误差估计，并推导了估计算法。仿真例说明，该方法是模型不确定性非线性系统状态递推估计的有效方法。     

基于Volterra级数的非线性非定常气动力降阶模型

发展了一种基于Volterra级数的非线性非定常气动力降阶模型。着重探讨了基于CFD／CSD耦合计算的Volterra核辨识方法。CFD／CSD耦合计算采用了一种简单的动网格快速生成方法，气动网格与结构网格节点间的物理信息交换采用一种改进的CVT方法。通过与CFD／CSD直接计算的结果对比，表明非定常气动力Volterra级数模型是一种效率高、精度好、能描述非线性、便于使用的降阶模型，特别适用于预测结构做非定常运动下的非定常气动力。