Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

基于传热反问题方法的N_2O/C_2H_4预混推进剂燃烧室热流测量研究

测量液体火箭发动机的热载荷是获取燃烧室内部信息的重要方法。为了获取N_2O/C_2H_4预混推进剂燃烧室内壁的热载荷,建立了液体火箭发动机的热流计算的反问题方法,该方法基于对燃烧室壁面温度场的直接求解,通过对轴向多个位置测量温度的反演计算得到燃烧室内壁热流和温度。研究表明:应用文中建立的传热反问题方法能够较为准确地获得热流随时间及空间的分布;热电偶的位置对计算准确性有明显的影响,与理论深度偏差在0.2mm以内的随机深度偏差可导致超过4%热流反演误差;N_2O/C_2H_4预混推进剂燃烧室热流及温度沿轴向逐渐降低,表明燃烧室内的反应释热过程主要在燃烧室头部附近发生。     

非对称结构损伤飞机鲁棒容损控制器设计

当飞机发生非对称结构损伤时,飞机的质量、重心位置和气动特性都会发生突变,飞机机体的对称性遭到破坏,致使飞机的横纵向间运动产生强烈的耦合。针对飞机发生非对称结构损伤时导致的飞行控制问题,建立了非对称结构损伤飞机的损伤模型,并基于一种新型鲁棒容损控制策略,采用非线性扩张状态观测器和非线性动态逆相结合的方法,对飞机的姿态控制器进行了设计,兼顾了飞机系统的性能和对损伤的鲁棒性。最后,基于NASA的通用运输机模型,对所设计控制器的控制效果进行了仿真验证。仿真结果表明,设计的姿态控制器有效地抑制了非对称结构损伤给飞机控制系统带来的不确定性和扰动,具有较好的控制性能。     

失真仪误差分析和检定问题

本文通过大量的实验数据,详细分析了失真仪的各种误差,指出了影响失真仪质量的原因,提出了合理判定仪器质量的方法和建议,为厂家提供了改进设计的思路。     

轨道转移计算中的逐次消元迭代法

本文针对导弹飞行轨道转移的一个算例,叙述应用消元法思想构造数值求解非线性方程组的迭代算法的一般原理,具体算法步骤和一些计算结果。给出算法成功的理论依据,最后给出实现算法时的一些变形。     

月球引力转弯软着陆的制导控制研究

对于月球引力转弯软着陆过程 ,采用反馈线性化方法 ,对高度和速度信息分别设计了跟踪制导控制律 ,并应用微分几何的有关理论证明了这两种跟踪制导控制系统的李雅普诺夫稳定性。此外 ,根据软着陆系统推力、燃料和状态的约束条件 ,给出了引力转弯着陆过程初始条件的可达集合。最后给出的软着陆跟踪制导实例 ,只需要测得斜向距离、速度和姿态角度信息。这种制导方法测量简单 ,适于低成本的软着陆任务。     

大气中层顶区域波相互作用的一个观测个例

利用SOUSY VHF雷达的观测数据分析了极区中层顶83.4-91.2km范围内大气风场波动的非线性相互作用。大气风场的谱在不同高度上均有明显的潮汐分量峰值，纬向风分量中35h波、半日潮和8.9h惯必重力波构成共振相互作用对，经向风分量中33h波、半日潮和19h惯性重力波构成共振相互作用对。双谱分析表明，这些共振对在许多高度上都发生耦合，35h或33h波振幅的极小值与半日潮的极大值出现的高度几乎相同，呈现出明显的非线性相互作用在空间上不是局域的，而是存在于中层顶区域的几乎所有高度上，这种相互作用不仅导致半日潮振幅随时间的变化，也使半日潮的振幅随空间变化。35h和33h波动可能是在其他时段或其他位置通过行星波与周日潮相互作用产生的，然后传播到观测点并与半日潮发生相互作用。